Aller au contenu principal
Annexe II Entrée 1162 CMRModifiée 21 Oct 2010

6-Methoxy-m-toluidine (p-Cresidine)

6-Methoxy-m-toluidine (p-Cresidine) figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 1162
CMR

Détails de la fiche

Nom chimique

6-Methoxy-m-toluidine (p-Cresidine)

Informations réglementaires

Données clés

Annexe
Numéro d’entrée
1162

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 120-71-8
CAS 120-71-8PubChem CID 8445

2-Methoxy-5-Methylaniline

P-cresidine appears as white to silver-gray odorless crystals. (NTP, 1992) — CAMEO Chemicals

Nom IUPAC
2-methoxy-5-methylaniline
Formule moléculaire
C8H11NO
Masse moléculaire
137.18 g/mol
Masse exacte
137.084063974 Da
XLogP3
1,7
Surface polaire topologique
35,3 Ų
Donneurs de liaisons hydrogène
1
Accepteurs de liaisons hydrogène
2
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

P-CRESIDINECresidine5-Methyl-o-anisidinepara-CresidineKrezidin2-Amino-4-methylanisole3-Amino-4-methoxytoluene4-Methoxy-m-toluidine
16 autres noms signalés
Krezidine1-Amino-2-methoxy-5-methylbenzene4-Methyl-2-aminoanisoleAzoic Red 362-Methoxy-5-methylbenzenamineo-Anisidine, 5-methyl-C.I. Azoic Red 833-Amino-p-cresol methyl etherNCI-C02982m-Amino-p-cresol, methyl esterortho-Anisidine, 5-methyl-3-Amino-para-cresol, methyl ethermeta-Amino-para-cresol, methyl etherNSC61624C11L78UR3NSC-6162
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8445

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H350: May cause cancer [Danger Carcinogenicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P264, P270, P280, P301+P317, P318, P330, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H319 (23.7%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H350 (99.4%): May cause cancer [Danger Carcinogenicity] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P264, P264+P265, P270, P280, P301+P317, P305+P351+P338, P318, P330, P337+P317, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 173 reports by companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P264, P264+P265, P270, P280, P301+P317, P302+P352, P305+P351+P338, P308+P316, P318, P321, P330, P332+P317, P337+P317, P362+P364, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Danger Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H350: May cause cancer [Danger Carcinogenicity] Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • Environmental Bioconcentration: BCFs of <4.6 to 10 were measured for p-cresidine(1,2). In a bioconcentration test using orange-red killifish, p-cresidine was listed as a compound which is non accumulative or of low accumulation in aquatic organisms(3). According to a classification scheme(4), these BCF values suggest that bioconcentration in aquatic organisms is low. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 53(SRC), determined from a log Kow of 1.74(2) and a regression-derived equation(3), indicates that p-cresidine is expected to have high mobility in soil(SRC). However, aromatic amines are expected to bind strongly to humus or organic matter in suspended solids and sediments due to the high reactivity of the aromatic amino group(4,5). Volatilization of p-cresidine from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.2X10-7 atm-cu m/mole(SRC), using a fragment constant estimation method(6). p-Cresidine is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 2.5X10-2 mm Hg(SRC), determined from a fragment constant method(7). p-Cresidine reached 0.7% of its theoretical BOD in 2 weeks using the Japanese MITI test(8), suggesting that biodegradation is not a rapid environmental fate process in soils(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 53(SRC), determined from a log Kow of 1.74(2) and a regression-derived equation(3), indicates that p-cresidine is not expected to adsorb to suspended solids and sediment(SRC). However, aromatic amines are expected to bind strongly to humus or organic matter in suspended solids and sediments due to the high reactivity of the aromatic amino group(4,5). Volatilization from water surfaces may occur slowly(3) based upon an estimated Henry's Law constant of 1.2X10-7 atm-cu m/mole(SRC), developed using a fragment constant estimation method(6). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 23 and 169 days, respectively(SRC). According to a classification scheme(7), a BCF of <4.6(8), suggests bioconcentration in aquatic organisms is low(SRC). p-Cresidine reached 0.7% of its theoretical BOD in 2 weeks using the Japanese MITI test(8), suggesting that biodegradation is not a fast environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), p-cresidine, which has an estimated vapor pressure of 2.5X10-2 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase p-cresidine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 2 hrs(SRC), calculated from its rate constant of 2.2X10-10 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Source: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Chemical intermediate for dyes; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For p-cresidine (USEPA/OPP Pesticide Code: 042002) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Chem int for dyes (e.g., FD&C Red 40 and Direct Violet 9) Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Substance listed with specific concentration in tattoo ink and/or permanent make up according to EU Commission Regulation 2020/2081. The concentration limit (by weight) is 0.0005%. Source: NORMAN Suspect List Exchange

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 1165
Fiche voisine dans la même annexe

2-Nitrotoluene

CAS: 88-72-2
EC: 201-853-3
Annexe II 1157
Fiche voisine dans la même annexe

Azafenidin (ISO)

CAS: 68049-83-2
EC: 620-425-0
Annexe II 1167
Fiche voisine dans la même annexe

Naphthalene

CAS: 91-20-3
EC: 202-049-5

Ce que signifie l’annexe II pour 6-Methoxy-m-toluidine (p-Cresidine)

6-Methoxy-m-toluidine (p-Cresidine) figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).
  • Cette substance a une classification CMR. Examinez le tableau CMR ci-dessus et vérifiez le statut actuel dans les annexes II/III avant toute utilisation.

Questions fréquentes

Oui. 6-Methoxy-m-toluidine (p-Cresidine) figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 120-71-8 est l’identifiant numérique unique attribué à 6-Methoxy-m-toluidine (p-Cresidine) par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

6-Methoxy-m-toluidine (p-Cresidine) a une classification CMR (cancérogène, mutagène ou toxique pour la reproduction) en vertu du règlement CLP de l’UE. Selon l’article 15 du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques, les substances CMR des catégories 1A ou 1B sont interdites dans les cosmétiques, sauf autorisation expresse. Les substances CMR de catégorie 2 ne peuvent être utilisées que si le SCCS les a jugées sûres. Vérifiez toujours le statut actuel dans les annexes et les éventuelles dérogations applicables avant toute utilisation.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche 6-Methoxy-m-toluidine (p-Cresidine) de l’annexe II

Cette page résume une fiche de l’annexe II pour 6-Methoxy-m-toluidine (p-Cresidine) à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour 6-Methoxy-m-toluidine (p-Cresidine), mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter 6-Methoxy-m-toluidine (p-Cresidine) et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez 6-Methoxy-m-toluidine (p-Cresidine) côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II