Ammonium fluoride
New Zealand Cosmetic Products Group Standard Schedule 5, reference 33.
Regulatorische Entscheidung und vollständige Bedingungen
- Status
- Restricted
- Rechtsrolle
- Binding rule
- Regulatorische Zusammenfassung
- New Zealand Cosmetic Products Group Standard Schedule 5, reference 33.
- Bedingungen und Beschränkungen
Product scope: Oral products · Maximum concentration: 0.15% calculated as F When mixed with other fluorine compounds permitted under Schedule 5, total F concentration must not exceed 0.15% · Warnings: Contains ammonium fluoride. For any toothpaste with compounds containing fluorine at a concentration of 0.1 to 0.15%, calculated as F, unless it is already labelled as contra-indicated for children (e.g. for adult use only) the following labelling is obligatory: Children five years and under should use a smear of toothpaste and children six years and over should use a pea-sized amount of toothpaste.
Stoffidentität
- Name in der amtlichen Quelle
- Ammonium fluoride
- CAS
- 12125-01-8
- EC
- 235-185-9
- Identitätszuordnung
- cas_number
- Verknüpfter Inhaltsstoff
- AMMONIUM FLUORIDE
Verknüpfte CosIng-Identitätsdaten
Namen und Aliase
CosIng-Beschreibung: Ammonium fluoride
Beschränkungshinweis aus dem EU-Verzeichnis: III/33
Erfasste kosmetische Funktion: ANTIPLAQUE, ORAL CARE
Funktionsseiten:ANTIPLAQUE, ORAL CARE
Das vollständige Inhaltsstoffprofil ansehenMarktübergreifende Übersicht zu dieser Identität
Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.
European Union
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenGreat Britain
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenNew Zealand
Aktueller Eintrag1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenASEAN
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenIndia
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSaudi Arabia
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnen
Verifizierte Chemie für CAS 12125-01-8
Ammonium fluoride
Ammonium fluoride is a fluoride salt having ammonium (NH4+) as the counterion. It is a fluoride salt and an ammonium salt. — ChEBI
- IUPAC-Name
- azanium fluoride
- Summenformel
- FH4N
- Molekulargewicht
- 37.037 g/mol
- Exakte Masse
- 37.032777294 Da
- Monoisotopische Masse
- 37.032777294 Da
- Topologische polare Oberfläche
- 1,0 Ų
- Molekulare Komplexität
- 0,0
- Formale Ladung
- 0
- Wasserstoffbrücken-Donoren
- 1
- Wasserstoffbrücken-Akzeptoren
- 1
- Drehbare Bindungen
- 0
- Schweratome
- 2
- Kovalente Einheiten
- 2
An PubChem gemeldete Namen und Synonyme
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:66871
- EPA DTXSID:DTXSID6050463
Erweiterte Strukturstatistik
- Definierte Atom-Stereozentren
- 0
- Nicht definierte Atom-Stereozentren
- 0
- Definierte Bindungs-Stereozentren
- 0
- Nicht definierte Bindungs-Stereozentren
- 0
- 3D-Konformere
- 0
Maschinenlesbare Strukturkennungen
- SMILES
[NH4+].[F-]- InChI
InChI=1S/FH.H3N/h1H;1H3- InChIKey
LDDQLRUQCUTJBB-UHFFFAOYSA-N
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 212 °F at 760 mmHg (USCG, 1999) Quelle: CAMEO Chemicals
- Color/Form: Deliquescent leaflets or needles; hexagonal prisms by sublimation; occurs commercially as a granular powder Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: White hexagonal crystals Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.32 at 77 °F (USCG, 1999) - Denser than water; will sink Quelle: CAMEO Chemicals
- Density: 1.015 Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.01 g/cm³ Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 1.00925 @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Melting Point: 238 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: sublimes Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 126 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Odor: Odorless Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Ammonium fluoride is a white crystalline solid. It is soluble in water. It is noncombustible. It is corrosive to aluminum. It is used in chemical analysis, in brewing, and as a preservative for wood. Quelle: CAMEO Chemicals
- Physical Description: Liquid; Dry Powder; Large Crystals; CBI Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless or white solid; [ICSC] Deliquescent; [Merck Index] White crystalline solid with an ammonia-like odor; [MSDSonline] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS CRYSTALS OR WHITE POWDER. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: 83.5 g/100 g water at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 100 g/100 mL of water at 0 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 82.780 lb/100 lb of water at 70 °F Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 45.3 g/100 g water at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Slightly soluble in alcohol Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water, g/100ml at 25 °C: 45.3 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- pH: The aqueous solution is acidic. Quelle: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by inhalation of its aerosol and by ingestion. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: Begin first aid as quickly as possible.; INHALATION: remove to fresh air.; INGESTION: perform gastric lavage with limewater or 1% calcium chloride solution; support respiration; call a physician.; EYES: flush with water for 15 min.; consult physician.; SKIN: shower immediately with large quantities of water; remove all contaminated clothing in the shower at once; consult physician. (USCG, 1999) Quelle: CAMEO Chemicals
- ERG2024, Guide 154 (Ammonium fluoride): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
- Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P261, P262, P264, P270, P271, P280, P301+P316, P302+P352, P304+P340, P316, P321, P330, P361+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (98.7%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H314 (14.7%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H318 (16.7%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H331 (99.9%): Toxic if inhaled [Danger Acute toxicity, inhalation] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P260, P261, P262, P264, P264+P265, P270, P271, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P321, P330, P361+P364, P363, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 3035 reports by companies from 19 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- Precautionary Statement Codes: P260, P264, P264+P265, P270, P280, P305+P351+P338, P319, P337+P317, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Warning Quelle: NITE-CMC
- GHS Hazard Statements: H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 0 - Materials that will not burn under typical fire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Plating agent; Etching agent Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Semiconductor and photovoltaic agent; Processing aids not otherwise specified; Plating agent; Other; Intermediate; Etching agent; Surface modifier; Cleaning agent Quelle: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used in etching and frosting glass; as antiseptic in brewing beer; for preserving wood; in printing and dyeing textiles; and as mothproofing agent; [HSDB] Used as a wet etchant in semiconductor manufacturing at a standard concentration of 40%; [CSH, p. 46] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Semiconductor Manufacturing [Category: Industry]; Applying Wood Preservatives [Category: Other]; Using Disinfectants or Biocides [Category: Clean]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Glass Manufacturing [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Etching and frosting glass, as antiseptic in brewing beer; preserving wood; in printing and dyeing textiles; as mothproofing agent Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Fluorides; analytical chemistry Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Ammonium fluoride is available principally as a laboratory reagent. If it is needed in large quantities, one mole of aqueous ammonia can be mixed with one mole of the more readily available ammonium bifluoride. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Amtliche Quelle und Herkunft
- Registrierte Quelle
- New Zealand cosmetic product schedules 4–8
- Quellenverweis
- Schedule 5, reference 33, source row 54
- Eintrags-ID der Quelle
S5-54- Quellenversion
- effective-2026-01-01
- Quellsprache
- English
- Übersetzungsstatus
- Original is English
- Datum des Inkrafttretens
- 2026-01-01
- Quelle aktualisiert
- 2024-01-01
- Stand geprüft
- 2026-08-30 04:54 UTC
- Validierungsmethode
- openpyxl extraction; reviewed per-schedule counts
- SHA-256
4e62e372fb0aad7ac630af8c41fa50b38b52a793fd51b99697a65f8ecce1ae8a
Hinweise zum registrierten Datensatz
- Datensatzabdeckung
- Prohibited and restricted substances, permitted colorants, preservatives and UV filters
- Hinweis zur Behörde
- Official EPA group standard schedules; current market-specific rule source
Wie dieser Eintrag in den Marktdatensatz passt
Statusverteilung
Bedingungstext ist bei 747 von 2913 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.
New Zealand Marktkontext
Complete schedules dataset
Abdeckungsversion: Cosmetic Products Group Standard schedules effective 1 January 2026
Schedules 4–8: prohibited, restricted, colourant, preservative and UV-filter entries.
Verifizierungs-Checkliste
- Search exact identity across Schedules 4–8.
- Apply use, concentration and warning conditions.
- Check hazardous-substance classification and Group Standard scope.
- Confirm the latest legal instrument, not only the spreadsheet.
Amtliche Marktquellen
- New Zealand cosmetic product schedules 4–8Official EPA group standard schedules; current market-specific rule source
Verifizierungsablauf und Vollständigkeit des Eintrags
Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden
- Bestätigen Sie, dass „Ammonium fluoride“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
- Search exact identity across Schedules 4–8.
- Apply use, concentration and warning conditions.
- Check hazardous-substance classification and Group Standard scope.
- Confirm the latest legal instrument, not only the spreadsheet.
- Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.
In diesem Eintrag verfügbare Felder
- Amtlicher StoffnameVerfügbar
- CASVerfügbar
- ECVerfügbar
- Gesonderter BedingungstextVerfügbar
- Datum des InkrafttretensVerfügbar
- Snapshot-Hash und MethodeVerfügbar
Fragen, die diese Seite beantwortet
Dauerhafte Zitierweise
Ammonium fluoride. Schedule 5, reference 33, source row 54. New Zealand. Source version effective-2026-01-01. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/nz/records/8898/
Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.
Auslegung und Grenzen für New Zealand
This substance is not unrestricted: cosmetic use is subject to the conditions in the cited official record.
Check product type, body area, concentration, purity and warning requirements before deciding whether a formulation is compliant.
Wie die Rechtsrolle auszulegen ist
The cited row forms part of a binding rule or legally incorporated list for this market.
Belege auf dieser Seite
- Erfasstes Ergebnis: Restricted
- Rechtsrolle: Binding rule
- Quellenversion: effective-2026-01-01
- Datum des Inkrafttretens: 2026-01-01
Was es nicht beweist
The searchable spreadsheet is an aid; the legal Group Standard and incorporated notices remain authoritative.
Weitere maßgebliche Stoffrecherche
Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Diese Identität bei der Quelle recherchierenFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Diese Identität bei der Quelle recherchierenILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Diese Identität bei der Quelle recherchierenJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Diese Identität bei der Quelle recherchierenNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Diese Identität bei der Quelle recherchierenOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Diese Identität bei der Quelle recherchierenUS EPA CompTox CTX APIs
Für den Import ist ein API-Schlüssel erforderlichDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Diese Identität bei der Quelle recherchieren