Diethylhexyl Adipate
Canada Hotlist: Diethylhexyl Adipate
Health Canada lists this ingredient as restricted; the listed conditions and warnings apply.
Regulatorische Entscheidung und vollständige Bedingungen
- Status
- Restricted
- Rechtsrolle
- Official guidance
- Regulatorische Zusammenfassung
- Health Canada lists this ingredient as restricted; the listed conditions and warnings apply.
- Bedingungen und Beschränkungen
Synonyms or related compounds: DEHA; Dioctyl Adipate; Bis(2-Ethylhexyl)Hexanedioate | a) Leave-on body moisturizers | b) Other cosmetics · Maximum concentration: a) 6.0%
Stoffidentität
- Name in der amtlichen Quelle
- Diethylhexyl Adipate
- CAS
- 103-23-1
- EC
- 203-090-1
- Identitätszuordnung
- cas_number
- Verknüpfter Inhaltsstoff
- DIETHYLHEXYL ADIPATE
Verknüpfte CosIng-Identitätsdaten
Namen und Aliase
CosIng-Beschreibung: Bis(2-ethylhexyl) adipate
Erfasste kosmetische Funktion: FILM FORMING, PLASTICISER, SKIN CONDITIONING, SKIN CONDITIONING - EMOLLIENT, SOLVENT
Funktionsseiten:FILM FORMING, PLASTICISER, SKIN CONDITIONING, SKIN CONDITIONING - EMOLLIENT, SOLVENT
Das vollständige Inhaltsstoffprofil ansehenMarktübergreifende Übersicht zu dieser Identität
Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.
Canada
Aktueller Eintrag1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnen
Verifizierte Chemie für CAS 103-23-1
Bis(2-ethylhexyl) adipate
Bis(2-ethylhexyl) adipate is a diester resulting from the formal condensation of the carboxy groups of adipic acid with 2-ethylhexan-1-ol. It is used as a plasticiser in the preparation of various polymers. It has a role as a plasticiser. It is a member of dicarboxylic acids and O-substituted derivatives, a carboxylic ester and a diester. It is functionally related to a 2-ethylhexan-1-ol and an adipic acid. — ChEBI
- IUPAC-Name
- bis(2-ethylhexyl) hexanedioate
- Summenformel
- C22H42O4
- Molekulargewicht
- 370.6 g/mol
- Exakte Masse
- 370.30830982 Da
- Monoisotopische Masse
- 370.30830982 Da
- XLogP3
- 6,8
- Topologische polare Oberfläche
- 52,6 Ų
- Molekulare Komplexität
- 320,0
- Formale Ladung
- 0
- Wasserstoffbrücken-Donoren
- 0
- Wasserstoffbrücken-Akzeptoren
- 4
- Drehbare Bindungen
- 19
- Schweratome
- 26
- Kovalente Einheiten
- 1
An PubChem gemeldete Namen und Synonyme
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:34675
- ChEMBL:CHEMBL1414950
- EPA DTXSID:DTXSID0020606
- PubMed:22346617
- PubMed:21783615
- PubMed:21714626
- PubMed:21575223
- PubMed:21400322
- PubMed:20681565
- PubMed:20414453
- PubMed:20392686
- PubMed:20352652
- PubMed:20334193
- PubMed:19957297
- PubMed:19842066
Erweiterte Strukturstatistik
- Definierte Atom-Stereozentren
- 0
- Nicht definierte Atom-Stereozentren
- 2
- Definierte Bindungs-Stereozentren
- 0
- Nicht definierte Bindungs-Stereozentren
- 0
- 3D-Konformere
- 0
Maschinenlesbare Strukturkennungen
- SMILES
CCCCC(CC)COC(=O)CCCCC(=O)OCC(CC)CCCC- InChI
InChI=1S/C22H42O4/c1-5-9-13-19(7-3)17-25-21(23)15-11-12-16-22(24)26-18-20(8-4)14-10-6-2/h19-20H,5-18H2,1-4H3- InChIKey
SAOKZLXYCUGLFA-UHFFFAOYSA-N
Belege aus weiteren wissenschaftlichen Datenbanken
EMBL-EBI ChEBI
bis(2-ethylhexyl) adipate
A diester resulting from the formal condensation of the carboxy groups of adipic acid with 2-ethylhexan-1-ol. It is used as a plasticiser in the preparation of various polymers.
- Rezeptur
- C22H42O4
- Durchschnittsmasse
- 370.574 g/mol
- Monoisotopische Masse
- 370.30831 Da
- Formale Ladung
- 0
- diester — is a (CHEBI:51307)
- carboxylic ester — is a (CHEBI:33308)
- dicarboxylic acids and O-substituted derivatives — is a (CHEBI:131927)
- plasticiser — has role (CHEBI:79056)
- 2-ethylhexan-1-ol — has functional parent (CHEBI:16011)
- adipic acid — has functional parent (CHEBI:30832)
- plasticiser — has role (CHEBI:79056)
- diester — is a (CHEBI:51307)
- carboxylic ester — is a (CHEBI:33308)
- dicarboxylic acids and O-substituted derivatives — is a (CHEBI:131927)
Weitere kuratierte Namen
Querverweise aus dieser Quelle
- CAS: 103-23-1 — KEGG COMPOUND
- CAS: 103-23-1 — ChemIDplus
- CAS: 103-23-1 — NIST Chemistry WebBook
- REGISTRY_NUMBER: 1803774 — Reaxys
- MANUAL_X_REF: Bis(2-ethylhexyl)_adipate — Wikipedia
- MANUAL_X_REF: C14240 — KEGG COMPOUND
- MANUAL_X_REF: HMDB0040270 — HMDB
Zugeordnet durch: Exact CAS cross-reference in the ChEBI compound record. Quelle aktualisiert: 2016-05-16. Abgerufen: 2026-08-31. Quelleneintrag öffnen
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 710 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Autoignition Temperature: 710 °F (377 °C) Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 783 °F at 760 mmHg (NTP, 1992) Quelle: CAMEO Chemicals
- Boiling Point: 214 °C @ 5 mm Hg Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 416.00 to 418.00 °C. @ 760.00 mm Hg Quelle: Human Metabolome Database (HMDB)
- Color/Form: COLORLESS OR VERY PALE AMBER LIQ Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Light colored, oily liquid. Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 0.923 (USCG, 1999) - Less dense than water; will float Quelle: CAMEO Chemicals
- Density: 0.922 @ 25 °C/4 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 0.922 @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 385 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Flash Point: 196 °C Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 402 °F (206 °C) (OPEN CUP) Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: -90 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Melting Point: -67.8 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: -67.8 °C Quelle: Human Metabolome Database (HMDB)
- Melting Point: -67.8 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Odor: SLIGHT AROMATIC SMELL Quelle: Hazardous Substances Data Bank (HSDB)
- Odor: Odorless Quelle: Hazardous Substances Data Bank (HSDB)
- Odor: Mild Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Bis(2-ethylhexyl) adipate is a colorless to straw-colored liquid with a mild odor. Floats on water. (USCG, 1999) Quelle: CAMEO Chemicals
- Physical Description: Large Crystals; Liquid; Liquid; Liquid; Other Solid; CBI Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Light-colored, oily liquid; [Hawley] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Liquid Quelle: Human Metabolome Database (HMDB)
- Refractive Index: Index of refraction: 1.4474 @ 20 °C/D Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: less than 0.1 mg/mL at 72 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Solubility: SOL IN MOST ORG SOLVENTS; INSOL OR VERY SLIGHTLY SOL IN GLYCERINE & GLYCOLS Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in ethanol, ethyl ether, acetone, and acetic acid Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, 0.78 mg/l @ 22 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 0.00078 mg/mL at 22 °C Quelle: Human Metabolome Database (HMDB)
- Vapor Pressure: less than 0.01 mmHg at 68 °F ; 2.6 mmHg at 392 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Vapor Pressure: 0.00000085 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 8.5X10-7 mm Hg at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Viscosity: 13.7 cP @ 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- pH: Acidity: 0.25 (meg/100 gm. max) Quelle: Hazardous Substances Data Bank (HSDB)
- IARC Carcinogenic Agent: Di(2-ethylhexyl) adipate Quelle: International Agency for Research on Cancer (IARC)
- IARC Carcinogenic Classes: Group 3: Not classifiable as to its carcinogenicity to humans Quelle: International Agency for Research on Cancer (IARC)
- IARC Monographs: Volume Sup 7: Overall Evaluations of Carcinogenicity: An Updating of IARC Monographs Volumes 1 to 42, 1987; 440 pages; ISBN 92-832-1411-0 (out of print); Volume 77: (2000) Some Industrial Chemicals Quelle: International Agency for Research on Cancer (IARC)
- Publication Year: 2000 Quelle: International Agency for Research on Cancer (IARC)
- Evaluation Year: 2000 Quelle: International Agency for Research on Cancer (IARC)
- Substance: Di(2-ethylhexyl) adipate Quelle: NTP Technical Reports
- NTP Technical Report: TR-212: Carcinogenesis Bioassay of Di(2-ethylhexyl)adipate (CASRN 103-23-1) in F344 Rats and B6C3F1 Mice (Feed Study) (1982 ) Quelle: NTP Technical Reports
- Peer Review Date: 06/27/80 Quelle: NTP Technical Reports
- Conclusion for Male Rat: No Evidence Quelle: NTP Technical Reports
- Conclusion for Female Rat: No Evidence Quelle: NTP Technical Reports
- Conclusion for Male Mice: Clear Evidence Quelle: NTP Technical Reports
- Conclusion for Female Mice: Clear Evidence Quelle: NTP Technical Reports
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Quelle: CAMEO Chemicals
- Note: This chemical does not meet GHS hazard criteria for 96.5% (1012 of 1049) of all reports. Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: Not Classified; Reported as not meeting GHS hazard criteria by 1012 of 1049 companies (only 3.5% companies provided GHS information). For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 1049 reports by companies from 12 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 1012 of 1049 reports by companies.; There are 10 notifications provided by 37 of 1049 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: Not Classified; Reported as not meeting GHS hazard criteria by 1 of 1 companies. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Warning Quelle: NITE-CMC
- GHS Hazard Statements: H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
- Precautionary Statement Codes: P273, P391, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- GHS Hazard Statements: H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P261, P271, P280, P304+P340, P318, P319, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- GHS Hazard Statements: H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
- GHS Hazard Statements: Not Classified Quelle: NITE-CMC
- GHS Hazard Statements: H316: Causes mild skin irritation [Warning Skin corrosion/irritation]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Quelle: NITE-CMC
- NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Target Organs: Developmental; Hepatic; Musculoskeletal; Urinary Quelle: EPA Integrated Risk Information System (IRIS)
- Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Quelle: Cosmetic Ingredient Review (CIR)
- Environmental Bioconcentration: A whole-fish BCF of 27 was observed for blue-gill fish exposed to bis(2-ethylhexyl) adipate levels of 250 ug/l for a 28-day period(1). According to a classification scheme(2), this measured BCF value suggests the potential for bioconcentration in aquatic organisms is low. Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 49,000(SRC), determined from a structure estimation method(2), indicates that bis(2-ethylhexyl) adipate is expected to be immobile in soil(SRC). The dominant degradation process in the soil environment is expected to be microbial degradation. Biodegradation test results indicate that bis(2-ethylhexyl) adipate is readily biodegradable(3,4). Therefore, the dominant degradation process in the soil environment is expected to be microbial degradation(SRC). Volatilization of bis(2-ethylhexyl) adipate from moist soil surfaces is not expected to be an important fate process(SRC) given a Henry's Law constant of 4.34X10-7atm-cu m/mole(3). Bis(2-ethylhexyl) adipate is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 8.5X10-7mm Hg(3). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 49,000(SRC), determined from an estimation method(2), indicates that bis(2-ethylhexyl) adipate is expected to adsorb to suspended solids and sediment in water(SRC). Biodegradation test results indicate that bis(2-ethylhexyl) adipate is readily biodegradable(4). Therefore, the dominant degradation process in the aquatic environment is expected to be microbial degradation(4). Volatilization from water surfaces is not expected(3) based upon a Henry's Law constant of 4.34X10-7 atm-cu m/mole(4). According to a classification scheme(5), a BCF of 27(4), suggests the potential for bioconcentration in aquatic organisms is low. Bis(2-ethylhexyl) adipate is expected to hydrolyze producing 2-ethylhexanol and hexanoic acid(SRC). Estimated hydrolysis half-lives are 3 years and 120 days at pH values of 7 and 8, respectively(6). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), bis(2-ethylhexyl) adipate, which has a vapor pressure of 8.5X10-7 mm Hg at 20 °C(3), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase bis(2-ethylhexyl) adipate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 0.63 days(SRC), calculated from its rate constant of 2.5X10-11 cu cm/molecule-sec at 25 °C(4) determined using a structure estimation method(2). Particulate-phase bis(2-ethylhexyl) adipate may be removed from the air by wet and dry deposition(SRC). Bis(2-ethylhexyl) adipate may undergo direct photolysis in the environment, since this compound contains a functional group that can absorb light >290 nm(5). Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Anti-caking agent; Fragrance; Plasticizer; Binder; Lubricating agent; Emulsifier; Diluent; Not Known or Reasonably Ascertainable Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Dispersing agent; Solvent; Polymerization promoter; Fragrance; Plasticizer; Flavoring and nutrient; Fixing agent (mordant); Wetting agent (non-aqueous); Other; Binder; Lubricating agent; Emulsifier; Diluent; Not Known or Reasonably Ascertainable; Laboratory chemicals Quelle: EPA Chemical Data Reporting (CDR)
- Cosmetic Ingredient Review Link: CIR ingredient: Diethylhexyl Adipate Quelle: Cosmetic Ingredient Review (CIR)
- Sources/Uses: Used as a plasticizer, in processing polyvinyl and other polymers, as a solvent, in aircraft lubricants, and in hydraulic fluids; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Plasticizer, commonly blended with general purpose plasticizers, such as /di-n-octyl phthalate/ and /diisooctyl phthalate/ in processing polyvinyl and other polymers; solvent; aircraft lubes Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Functional (hydraulic) fluid Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Plasticizer or solvent in the following cosmetics: bath oils, eye shadow, cologne, foundations, rouge, blusher, nail-polish remover, moisturizers and indoor tanning preparations Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: ... PVC film now used in meat wrapping operations contains bis(2-ethyl hexyl) adipate (DOA) as its major plasticizer. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Plastics -> Typical concentration range in plastic materials -> 10.0 - 35.0% Quelle: NORMAN Suspect List Exchange
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| EMBL-EBI ChEBI | Exakter Treffer | 2026-08-31 |
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Amtliche Quelle und Herkunft
- Registrierte Quelle
- Health Canada Cosmetic Ingredient Hotlist
- Quellenverweis
- Hotlist restricted entry 33
- Eintrags-ID der Quelle
restricted:33- Quellenversion
- Health Canada Hotlist 2025-08-13
- Quellsprache
- English
- Übersetzungsstatus
- Original is English
- Quelle aktualisiert
- 2025-08-13
- Stand geprüft
- 2026-08-30 04:07 UTC
- Validierungsmethode
- strict HTML tables t1=490 and t2=90
- SHA-256
8b52ff573d08373ee90121f6a701b3607e4a3d6fc748a7d56171eb53510af91a
Hinweise zum registrierten Datensatz
- Datensatzabdeckung
- Administrative prohibitions, restrictions, conditions and warning requirements
- Hinweis zur Behörde
- Official Health Canada compliance indicator; not a complete safety clearance
Wie dieser Eintrag in den Marktdatensatz passt
Statusverteilung
Bedingungstext ist bei 172 von 580 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.
Canada Marktkontext
Complete Hotlist snapshot
Abdeckungsversion: Health Canada Cosmetic Ingredient Hotlist, 13 August 2025
All prohibited and restricted Hotlist entries, including conditions and warning requirements published in the official list.
Verifizierungs-Checkliste
- Search English/French names and CAS identifiers.
- Apply every restriction, concentration and label warning.
- Check Food and Drugs Act/Cosmetic Regulations requirements.
- Recheck the current Hotlist before notification or sale.
Amtliche Marktquellen
- Health Canada Cosmetic Ingredient HotlistOfficial Health Canada compliance indicator; not a complete safety clearance
Verifizierungsablauf und Vollständigkeit des Eintrags
Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden
- Bestätigen Sie, dass „Diethylhexyl Adipate“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
- Search English/French names and CAS identifiers.
- Apply every restriction, concentration and label warning.
- Check Food and Drugs Act/Cosmetic Regulations requirements.
- Recheck the current Hotlist before notification or sale.
- Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.
In diesem Eintrag verfügbare Felder
- Amtlicher StoffnameVerfügbar
- CASVerfügbar
- ECVerfügbar
- Gesonderter BedingungstextVerfügbar
- Datum des InkrafttretensNicht angegeben
- Snapshot-Hash und MethodeVerfügbar
Fragen, die diese Seite beantwortet
Dauerhafte Zitierweise
Diethylhexyl Adipate. Hotlist restricted entry 33. Canada. Source version Health Canada Hotlist 2025-08-13. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/ca/records/523/
Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.
Auslegung und Grenzen für Canada
This substance is not unrestricted: cosmetic use is subject to the conditions in the cited official record.
Check product type, body area, concentration, purity and warning requirements before deciding whether a formulation is compliant.
Wie die Rechtsrolle auszulegen ist
The authority uses this source as compliance guidance; the underlying legislation remains controlling.
Belege auf dieser Seite
- Erfasstes Ergebnis: Restricted
- Rechtsrolle: Official guidance
- Quellenversion: Health Canada Hotlist 2025-08-13
Was es nicht beweist
The Hotlist is an administrative compliance tool, not an exhaustive safety approval list.
Weitere maßgebliche Stoffrecherche
Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Diese Identität bei der Quelle recherchierenFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Diese Identität bei der Quelle recherchierenILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Diese Identität bei der Quelle recherchierenJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Diese Identität bei der Quelle recherchierenNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Diese Identität bei der Quelle recherchierenOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Diese Identität bei der Quelle recherchierenUS EPA CompTox CTX APIs
Für den Import ist ein API-Schlüssel erforderlichDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Diese Identität bei der Quelle recherchieren