Zum Hauptinhalt springen
CAS 1 Eintrag

CAS 111-41-1

CAS 111-41-1 entspricht 1 EU-Anhangseintrag in den Anhängen II–VI der Verordnung (EG) Nr. 1223/2009.

Einträge zu CAS 111-41-1

1 insgesamt

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 111-41-1
CAS 111-41-1PubChem CID 8112

N-(2-Hydroxyethyl)ethylenediamine

Aminoethylethanolamine appears as a clear colorless liquid with an ammonia-like odor. Corrosive to tissue. Combustible, but may be difficult to ignite. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used to make other chemicals. — CAMEO Chemicals

IUPAC-Name
2-(2-aminoethylamino)ethanol
Summenformel
C4H12N2O
Molekulargewicht
104.15 g/mol
Exakte Masse
104.094963011 Da
XLogP3
-1,7
Topologische polare Oberfläche
58,3 Ų
Wasserstoffbrücken-Donoren
3
Wasserstoffbrücken-Akzeptoren
3
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

monoethanol ethylenediamineRefChem:112035Aminoethylethanolamine2-((2-Aminoethyl)amino)ethanolN-(Hydroxyethyl)ethylenediamineN-(2-Aminoethyl)ethanolamineN-(Aminoethyl)ethanolamine(2-Hydroxyethyl)ethylenediamine
16 weitere gemeldete Namen
MonoethanolethylenediamineEthanol, 2-[(2-aminoethyl)amino]-(2-Aminoethyl)ethanolamine2-[(2-Aminoethyl)amino]ethanolEthanolethylene diamineN-Hydroxyethyl-1,2-ethanediamineN-Hydroxyethylethylenediamine2-[(2-aminoethyl)amino]ethan-1-olN-(2-Hydroxyethyl)-1,2-ethanediamineNSC 461Ethanol, 2-((2-aminoethyl)amino)-2-((Aminoethyl)amino)ethanol2-[2-Aminoethylamino]ethanolTrimetazidine Impurity PRC78W6NPXT1-(2-(Hydroxyethyl)amino)-2-aminoethane
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer8112

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H360Df: May damage the unborn child; Suspected of damaging fertility [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P260, P261, P264, P272, P280, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P318, P321, P333+P317, P362+P364, P363, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H290 (13.6%): May be corrosive to metals [Warning Corrosive to Metals]; H314 (99.4%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317 (> 99.9%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H318 (19%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H335 (17.8%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H360 (99.8%): May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P234, P260, P261, P264, P264+P265, P271, P272, P280, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P318, P319, P321, P333+P317, P362+P364, P363, P390, P403+P233, P405, P406, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 3278 reports by companies from 41 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
  • Precautionary Statement Codes: P273, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P264+P265, P271, P272, P273, P280, P284, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P318, P319, P321, P333+P317, P342+P316, P362+P364, P363, P403, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: Based upon an estimated log Kow of -1.39(1), the BCF for aminoethyl ethanolamine can be estimated to be 0.05 from a recommended regression-derived equation(2,SRC). This estimated BCF value indicates that bioconcentration in aquatic organisms is not important. Aminoethyl ethanolamine is miscible in water(3) which also indicates that bioconcentration is not important(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: The results of one biodegradation screening study have indicated that aminoethyl ethanolamine biodegrades readily(1); therefore, biodegradation may be an important transformation process in soil(SRC). Aminoethyl ethanolamine has a pKa of 7.21(2) that indicates it can exist in both the protonated and neutral forms in environmental media; neutral aminoethyl ethanolamine is expected to leach readily. However, the mobility of protonated aminoethyl ethanolamine in soil can not be predicted without additional experimental data(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: The results of one biodegradation screening study have indicated that aminoethyl ethanolamine biodegrades readily(1); therefore, biodegradation may be an important transformation process in water. Aquatic bioconcentration and volatilization are not expected to be important because of the high solubility of aminoethyl ethanolamine(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: Based upon a vapor pressure of 8.19X10-4 mm Hg at 25 °C(1), aminoethyl ethanolamine is expected to exist primarily in the vapor-phase in the ambient atmosphere(2,SRC). It will degrade rapidly in the atmosphere by the vapor-phase reaction with photochemically produced hydroxyl radicals with an estimated half-life of 3.3 hr(3,SRC). Aminoethyl ethanolamine is miscible with water(4), therefore, physical removal from air by wet deposition (dissolution in clouds, rainfall, etc) is possible(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Used as a chemical intermediate, textile finishing compound, and additive to oils in metal cutting; [HSDB] Occupational asthma reported in solderer and cable jointer; [Malo] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Metal Machining [Category: Heat or Machine]; Soldering [Category: Heat or Machine]; Semiconductor Manufacturing [Category: Industry]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: CHEM INT FOR CHELATING AGENTS, DETERGENTS & EMULSIFIERS, CORROSION INHIBITORS, MINING CHEMICALS, GASOLINE STABILIZERS, DYEING ASSISTANTS, MODIFYING AGENTS (TEXTILES), 2,4-D HERBICIDE SALTS, OILS USED IN TEXTILE PROCESSING, OILS USED IN METAL CUTTING, AND GAS PROCESSING CHEMICALS Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: TEXTILE FINISHING CMPD (ANTIFUMING AGENTS, DYESTUFFS, CATIONIC SURFACTANTS); RESINS, RUBBER PRODUCTS; INSECTICIDES, CERTAIN MEDICINALS Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Wie CAS 111-41-1 auf dieser Website verwendet wird

CAS 111-41-1 ist die Kennung des Chemical Abstracts Service, mit der diese Seite einem bestimmten Stoff zugeordnet wird. Im aktuellen Datenbestand hat 1 EU-Anhangseintrag diese Kennung; so können Sie gegenprüfen, ob derselbe Stoff in einem oder in mehreren regulatorischen Zusammenhängen auftaucht.

Nutzen Sie diese Seite, wenn eine Lieferantenspezifikation, ein Sicherheitsdatenblatt oder ein Rohstoffdossier CAS 111-41-1 nennt und Sie alle verknüpften Einträge der Anhänge II–VI an einem Ort sehen möchten. Die Eintragskarten oben sind der schnellste Weg zu Konzentrationsgrenzen, Warnhinweisen, Anhangszuordnung und Produktartbedingungen.

Häufig gestellte Fragen

Ein durch CAS 111-41-1 identifizierter Stoff kann in mehreren Anhängen der EU-Kosmetikverordnung vorkommen, wenn er in unterschiedlichen Zusammenhängen unterschiedlichen Bedingungen unterliegt. Ein Stoff kann beispielsweise nach Anhang III mit bestimmten Bedingungen beschränkt sein, und dieselbe CAS-Nummer kann auch in Anhang IV als zugelassener Farbstoff unter eigenen Eintragsbedingungen erscheinen. Jeder Eintrag muss einzeln geprüft werden.

Gleichen Sie die CAS-Nummer mit den Spezifikationsblättern und Analysenzertifikaten Ihrer Rohstoffe ab. Erscheint eine CAS-Nummer in Anhang II, prüfen Sie die Abwesenheit des Stoffs. Erscheint sie in Anhang III, prüfen Sie, ob Konzentrationsgrenzen und Produktartbedingungen in Ihrer Rezeptur eingehalten werden. Alle Anhangseinträge mit dieser CAS-Nummer sind oben aufgeführt.

Eine CAS-Nummer wird vom Chemical Abstracts Service (USA) vergeben und ist weltweit anerkannt. Eine EC-Nummer ist eine Kennung der Europäischen Kommission aus Verzeichnissen wie EINECS, ELINCS oder der NLP-Liste. Beide Kennungen können in Einträgen der EU-Kosmetikanhänge vorkommen. Manche Stoffe haben beide, manche nur eine, und einige ältere Einträge haben möglicherweise keine von beiden.

Der INCI-Checker akzeptiert Inhaltsstoffnamen, CAS-Nummern und EC-Nummern. Prüfen Sie diese CAS-Nummer direkt und gleichen Sie das Ergebnis anschließend mit den Spezifikationsblättern der Lieferanten und allen verknüpften Anhangsbedingungen ab.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Eine vollständige INCI-Liste prüfen und anschließend mit CAS 111-41-1 Lieferantendokumente zu den gefundenen Stoffen gegenprüfen.

INCI-Checker

Anhänge durchsuchen

Alle Anhänge der EU-Kosmetikverordnung nach Kategorie durchsuchen.

Alle Anhänge

Nach Name suchen

Nach INCI-Namen, Aliasen oder verwandten Kennungen suchen, die in Ihrer Dokumentation neben CAS 111-41-1 stehen.

Suche