Disodium EDTA-copper
Disodium EDTA-copper. (a) Identity. The color additive disodium EDTA-copper is disodium [[ N,N′- 1,2- ethanediylbis[ N - (carboxymethyl) glycinato]] (4-)- N,N′,O,O′,O N , O N ′] cuprate (2-). (b) Specifications. Disodium EDTA-copper shall conform to the following specifications and shall be free from impurities other than those named to the extent that such impurities may be avoided by good manufacturing practice: Total copper, not less than 13.5 percent. Total (ethylene-dinitrilo) tetracetic acid, not less than 62.5 percent. Free copper, not more than 100 parts per million. Free disodium salt of (ethylene-dinitrilo) tetraacetic acid, not more than 1.0 percent. Moisture, not more than 15 percent. Water insoluble matter, not more than 0.2 percent. Lead (as Pb), not more than 20 parts per million. Arsenic (as As), not more than 3 parts per million. (c) Uses and restrictions. Disodium EDTA-copper may be safely used in amounts consistent with good manufacturing practices in the coloring of shampoos which are cosmetics. (d) Labeling requirements. The labeling of the color additive shall conform to the requirements of § 70.25 of this chapter. (e) Exemption from certification. Certification of this color additive is not necessary for the protection of the public health and therefore batches thereof are exempt from the requirements of section 721(c) of the act.
규제 판단 및 전체 조건
- 상태
- Permitted list with conditions
- 법적 역할
- Binding rule
- 규제 요약
- Disodium EDTA-copper. (a) Identity. The color additive disodium EDTA-copper is disodium [[ N,N′- 1,2- ethanediylbis[ N - (carboxymethyl) glycinato]] (4-)- N,N′,O,O′,O N , O N ′] cuprate (2-). (b) Specifications. Disodium EDTA-copper shall conform to the following specifications and shall be free from impurities other than those named to the extent that such impurities may be avoided by good manufacturing practice: Total copper, not less than 13.5 percent. Total (ethylene-dinitrilo) tetracetic acid, not less than 62.5 percent. Free copper, not more than 100 parts per million. Free disodium salt of (ethylene-dinitrilo) tetraacetic acid, not more than 1.0 percent. Moisture, not more than 15 percent. Water insoluble matter, not more than 0.2 percent. Lead (as Pb), not more than 20 parts per million. Arsenic (as As), not more than 3 parts per million. (c) Uses and restrictions. Disodium EDTA-copper may be safely used in amounts consistent with good manufacturing practices in the coloring of shampoos which are cosmetics. (d) Labeling requirements. The labeling of the color additive shall conform to the requirements of § 70.25 of this chapter. (e) Exemption from certification. Certification of this color additive is not necessary for the protection of the public health and therefore batches thereof are exempt from the requirements of section 721(c) of the act.
- 조건 및 제한 사항
Disodium EDTA-copper. (a) Identity. The color additive disodium EDTA-copper is disodium [[ N,N′- 1,2- ethanediylbis[ N - (carboxymethyl) glycinato]] (4-)- N,N′,O,O′,O N , O N ′] cuprate (2-). (b) Specifications. Disodium EDTA-copper shall conform to the following specifications and shall be free from impurities other than those named to the extent that such impurities may be avoided by good manufacturing practice: Total copper, not less than 13.5 percent. Total (ethylene-dinitrilo) tetracetic acid, not less than 62.5 percent. Free copper, not more than 100 parts per million. Free disodium salt of (ethylene-dinitrilo) tetraacetic acid, not more than 1.0 percent. Moisture, not more than 15 percent. Water insoluble matter, not more than 0.2 percent. Lead (as Pb), not more than 20 parts per million. Arsenic (as As), not more than 3 parts per million. (c) Uses and restrictions. Disodium EDTA-copper may be safely used in amounts consistent with good manufacturing practices in the coloring of shampoos which are cosmetics. (d) Labeling requirements. The labeling of the color additive shall conform to the requirements of § 70.25 of this chapter. (e) Exemption from certification. Certification of this color additive is not necessary for the protection of the public health and therefore batches thereof are exempt from the requirements of section 721(c) of the act.
물질 정체
- 공식 출처상의 명칭
- Disodium EDTA-copper
- CAS
- 14025-15-1
- EC
- 237-864-5
- 정체 매핑
- name
- 연결된 원료
- DISODIUM EDTA-COPPER
연결된 CosIng 정체 데이터
명칭 및 별칭
CosIng 설명: Disodium [[N,N'-ethylenebis[N-(carboxymethyl)glycinato]](4-)-N,N',O,O',ON,ON']cuprate(2-)
기록된 화장품 기능: ASTRINGENT, CHELATING
기능 페이지:ASTRINGENT, CHELATING
전체 원료 프로필 보기이 정체의 시장 간 요약
현재 이 사이트에 있는 정확히 연결된 기록입니다. 시장이 없는 것은 가져온 정확한 일치 항목이 없다는 뜻이며, 해당 물질의 사용이 허용된다는 뜻이 아닙니다.
United States
현재 기록연결된 기록 1건 · 특정 조건이 있는 기록 1건
보조 기록 열기
CAS 14025-15-1의 검증된 화학 정보
Cuprate(2-), ((N,N'-1,2-ethanediylbis(N-((carboxy-kappaO)methyl)glycinato-kappaN,kappaO))(4-))-, sodium (1:2), (OC-6-21)-
- IUPAC 명칭
- copper;disodium;2-[2-[bis(carboxylatomethyl)amino]ethyl-(carboxylatomethyl)amino]acetate
- 분자식
- C10H12CuN2Na2O8
- 분자량
- 397.74 g/mol
- 정확한 질량
- 396.968501 Da
- 단일 동위원소 질량
- 396.968501 Da
- 위상 극성 표면적
- 167.0 Ų
- 분자 복잡도
- 293.0
- 형식 전하
- 0
- 수소 결합 공여체
- 0
- 수소 결합 수용체
- 10
- 회전 가능 결합
- 7
- 중원자
- 23
- 공유결합 단위
- 4
PubChem에 보고된 명칭 및 동의어
보고된 명칭 10개 더 보기
고급 구조 통계
- 정의된 원자 입체중심
- 0
- 정의되지 않은 원자 입체중심
- 0
- 정의된 결합 입체중심
- 0
- 정의되지 않은 결합 입체중심
- 0
- 3D 형태이성질체
- 0
기계 판독 가능한 구조 식별자
- SMILES
C(CN(CC(=O)[O-])CC(=O)[O-])N(CC(=O)[O-])CC(=O)[O-].[Na+].[Na+].[Cu+2]- InChI
InChI=1S/C10H16N2O8.Cu.2Na/c13-7(14)3-11(4-8(15)16)1-2-12(5-9(17)18)6-10(19)20;;;/h1-6H2,(H,13,14)(H,15,16)(H,17,18)(H,19,20);;;/q;+2;2*+1/p-4- InChIKey
KCFCAUKZKOSSBI-UHFFFAOYSA-J
체크섬이 유효한 CAS 일치를 통해 2026-09-02에 NIH PubChem에서 가져왔습니다. 화학적 특성은 이 페이지의 규제 판단을 대체하지 않습니다.
공식 출처 및 출처 정보
- 등록된 출처
- US FDA cosmetic ingredient framework
- 출처 참조
- 21 CFR 73.2120
- 출처 기록 ID
73.2120- 출처 버전
- 2026-08-27
- 출처 언어
- English
- 번역 상태
- Original is English
- 출처 업데이트
- 2026-08-27
- 스냅샷 확인
- 2026-08-30 04:30 UTC
- 검증 방법
- eCFR XML subpart/section parse; 99 records
- SHA-256
25a55a997379f510077dfb234fe3f366e8a1429cec3d0b20fe4b60e2baf3c36d
등록된 데이터세트 주석
- 데이터세트 적용 범위
- Federal ingredient framework, prohibited/restricted examples and color-additive rules
- 권위 관련 주석
- The US has no EU-style general approved-ingredient catalogue; MoCRA listing is not approval
이 기록이 시장 데이터세트에서 차지하는 위치
상태 분포
현재 기록 99건 중 90건에 조건 텍스트가 있습니다. 조건 필드가 비어 있는 경우 위의 기록 유형에 따라 해석되며, 제한 없는 사용에 대한 주장으로 전환되지 않습니다.
United States 시장 맥락
Complete enumerated federal ingredient rules
적용 범위 버전: eCFR Title 21 issue date 27 August 2026
All cosmetic prohibitions/restrictions in Part 700 Subpart B and cosmetic-use colour additive listings in Parts 73, 74 and 82.
확인 체크리스트
- Search Part 700 and all relevant colour-additive parts.
- Confirm colour additive identity, permitted uses, limits and certification status.
- Assess safety and adulteration under the FD&C Act.
- Complete MoCRA facility/product, adverse-event and label obligations where applicable.
공식 시장 출처
- US FDA cosmetic ingredient frameworkThe US has no EU-style general approved-ingredient catalogue; MoCRA listing is not approval
확인 절차 및 기록 완전성
이 결과를 규제 준수 판단에 사용하기 전에
- “Disodium EDTA-copper”와(과) 모든 CAS/EC 식별자가 공급업체 규격서의 물질을 가리키는지 확인하세요.
- Search Part 700 and all relevant colour-additive parts.
- Confirm colour additive identity, permitted uses, limits and certification status.
- Assess safety and adulteration under the FD&C Act.
- Complete MoCRA facility/product, adverse-event and label obligations where applicable.
- 출처 버전을 기록하고, 제조, 신고 또는 시장 출시 전에 규제 기관을 다시 확인하세요.
이 기록에서 제공되는 필드
- 공식 물질 명칭제공됨
- CAS제공됨
- EC제공됨
- 별도의 조건 텍스트제공됨
- 시행일제공되지 않음
- 스냅샷 해시 및 방법제공됨
이 페이지가 답하는 질문
안정적인 인용
Disodium EDTA-copper. 21 CFR 73.2120. United States. Source version 2026-08-27. CosIng Checker regulatory record: https://cosingchecker.com/ko/regulations/us/records/729/
법적 권위로서 규제 기관을 인용하세요. 이 페이지는 구조화된 근거 색인이자 확인 보조 도구이며, 공식 본문이나 전문적인 법률 평가를 대체하지 않습니다.
United States의 해석 및 한계
This identity appears on a market positive list for the list function represented by the source record.
Confirm that the intended function and product use fall within the list scope and every stated condition.
법적 역할 해석 방법
The cited row forms part of a binding rule or legally incorporated list for this market.
이 페이지의 근거
- 기록된 결과: Permitted list with conditions
- 법적 역할: Binding rule
- 출처 버전: 2026-08-27
증명하지 않는 것
FDA has no general approved-cosmetic-ingredient catalogue; absence from these sections is not approval or proof of safety.
추가 공신력 있는 물질 조사
이 출처들 중 어느 것도 위의 시장 판단을 번복하지 않습니다.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
출처에서 이 정체 조사FDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
출처에서 이 정체 조사ILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
출처에서 이 정체 조사Japan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
출처에서 이 정체 조사NIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
출처에서 이 정체 조사OECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
출처에서 이 정체 조사US EPA CompTox CTX APIs
가져오기에 API 키 필요DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
출처에서 이 정체 조사