Aller au contenu principal
ProhibitedBinding ruleCNOfficial English translationImport de la source officielle contrôlé

乌洛托品 — Methenamine (CAS No. 100-97-0)

Methenamine (CAS No. 100-97-0)

The NMPA binding 2021 catalogue prohibits this raw material in cosmetic formulas in China.

Décision réglementaire et conditions complètes

Statut
Prohibited
Rôle juridique
Binding rule
Résumé réglementaire
The NMPA binding 2021 catalogue prohibits this raw material in cosmetic formulas in China.
Conditions et restrictions

Prohibited in cosmetic product formulas. Verify the cited Chinese source identity and any later NMPA amendment before use.

Identité de la substance

Nom dans la source officielle
乌洛托品 — Methenamine (CAS No. 100-97-0)
CAS
100-97-0
EC
202-905-8
Correspondance d’identité
cas_number
Ingrédient associé
METHENAMINE

Données d’identité CosIng associées

Noms et alias

METHENAMINEmethenamine

Description CosIng : 1,3,5,7-Tetraazatricyclo[3.3.1.1(3,7)]decane

Note de restriction de l’inventaire de l’UE : V/30

Fonction cosmétique enregistrée : ANTIMICROBIAL, PRESERVATIVE

Pages de fonctions :ANTIMICROBIAL, PRESERVATIVE

Voir le profil complet de l’ingrédient

Aperçu multi-marchés pour cette identité

Fiches exactes associées actuellement présentes sur ce site. L’absence d’un marché signifie qu’aucune correspondance exacte n’a été importée, et non une autorisation d’utiliser la substance.

7 jeux de données de marchés
Structure chimique 2D PubChem pour le CAS 100-97-0
CAS 100-97-0PubChem CID 4101

Chimie vérifiée pour le CAS 100-97-0

Hexamethylenetetramine

Hexamethylenetetramine is a polycyclic cage that is adamantane in which the carbon atoms at positions 1, 3, 5 and 7 are replaced by nitrogen atoms. It has a role as an antibacterial drug. It is a polycyclic cage, a tetramine and a polyazaalkane. — ChEBI

Nom IUPAC
1,3,5,7-tetrazatricyclo[3.3.1.13,7]decane
Formule moléculaire
C6H12N4
Masse moléculaire
140.19 g/mol
Masse exacte
140.106196400 Da
Masse monoisotopique
140.106196400 Da
XLogP3
0,3
Surface polaire topologique
13,0 Ų
Complexité moléculaire
84,0
Charge formelle
0
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
4
Liaisons rotatives
0
Atomes lourds
10
Unités covalentes
1

Noms et synonymes signalés à PubChem

methenamineHexamineUrotropineUrotropin1,3,5,7-TetraazaadamantaneUritoneHMTAHexamethylenamine
16 autres noms signalés
FormamineHexamethylene tetramineMethenaminAmmoformCystaminCystogenAmmonioformaldehydeForminAceto HMTHexamethylenetetraamineAminoformaldehydePreparation AFAntihydralDuirexolHexaformMetenamina
Identifiants de bases de données externes
Statistiques de structure avancées
Stéréocentres atomiques définis
0
Stéréocentres atomiques non définis
0
Stéréocentres de liaison définis
0
Stéréocentres de liaison non définis
0
Caractéristiques pharmacophoriques 3D
8
Cycles 3D
4
Groupes hydrophobes 3D
0
Caractéristiques d’accepteur 3D
0
Caractéristiques de donneur 3D
0
Centres anioniques 3D
0
Centres cationiques 3D
4
Conformères 3D
1
Rotors 3D effectifs
1,2
Identifiants de structure lisibles par machine
SMILES
C1N2CN3CN1CN(C2)C3
InChI
InChI=1S/C6H12N4/c1-7-2-9-4-8(1)5-10(3-7)6-9/h1-6H2
InChIKey
VKYKSIONXSXAKP-UHFFFAOYSA-N

Preuves issues de bases de données scientifiques complémentaires

EMBL-EBI ChEBI
Correspondance exacte d’identifiantCHEBI:6824

hexamethylenetetramine

A polycyclic cage that is adamantane in which the carbon atoms at positions 1, 3, 5 and 7 are replaced by nitrogen atoms.

Formule
C6H12N4
Masse moyenne
140.190 g/mol
Masse monoisotopique
140.10620 Da
Charge formelle
0
  • polycyclic cage — is a (CHEBI:33640)
  • polyazaalkane — is a (CHEBI:39474)
  • tetramine — is a (CHEBI:39166)
  • antibacterial drug — has role (CHEBI:36047)
  • antibacterial agent — has role (CHEBI:33282)
  • antibacterial drug — has role (CHEBI:36047)
  • antibacterial agent — has role (CHEBI:33282)
  • polycyclic cage — is a (CHEBI:33640)
  • polyazaalkane — is a (CHEBI:39474)
  • tetramine — is a (CHEBI:39166)
Noms supplémentaires validés
1,3,5,7-tetraazaadamantane1,3,5,7-tetraazatricyclo[3.3.1.1(3,7)]decaneAminoformE-239E239hexamethylenaminehexamethylene tetraminehexamethylenetetramineHexamethylentetraminhexamethylentetraminumhexaminehexaminumHMTHMTAINS-239INS NO.239methenamineNSC-26346NSC-403347
Références croisées de cette source
  • CAS: 100-97-0 — ChemIDplus
  • CAS: 100-97-0 — NIST Chemistry WebBook
  • REGISTRY_NUMBER: 2018 — Reaxys
  • REGISTRY_NUMBER: 26964 — Gmelin
  • MANUAL_X_REF: 3344 — DrugCentral
  • MANUAL_X_REF: D00393 — KEGG DRUG
  • MANUAL_X_REF: HMDB0029598 — HMDB
  • MANUAL_X_REF: LSM-5440 — LINCS
  • MANUAL_X_REF: Methenamine — Wikipedia
  • MANUAL_X_REF: US2762799 — Patent
  • MANUAL_X_REF: US2762800 — Patent

Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Source mise à jour le: 2017-02-22. Récupéré le: 2026-08-31. Ouvrir la fiche source

NIH PubChem PUG-View
Correspondance exacte d’identifiant4101

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • ERG2024, Guide 133 (Hexamethylenetetramine): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P210, P240, P241, P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, P370+P378, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H228 (100%): Flammable solid [Danger Flammable solids]; H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P240, P241, P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, P370+P378, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1051 reports by companies from 19 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H334 (100%): May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H351 (100%): Suspected of causing cancer [Warning Carcinogenicity] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P270, P271, P272, P280, P284, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P318, P321, P330, P333+P317, P342+P316, P362+P364, P363, P403, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 39 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Cosmetic Ingredient Review Conclusion: On the basis of the animal and clinical data presented in this report, the CIR Expert Panel concludes that Methenamine is safe for cosmetic use at concentrations not to exceed 0.16% in formulation. It cannot be concluded that Methenamine is safe for use in cosmetic products intended to be aerosolized. Source: Cosmetic Ingredient Review (CIR)
  • Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: IDENTIFICATION AND USE: Methenamine is a white or colorless crystalline solid. It is an anti-infective agent. Methenamine hippurate tablets, USP are indicated for prophylactic or suppressive treatment of frequently recurring urinary tract infections when long-term therapy is considered necessary. Non-medical uses include the following: in adhesives, coatings, and sealing compounds; as cross-linking agent for hardening phenol-formaldehyde resin and vulcanizing rubber; as corrosion inhibitor for steel; as fuel tablets for camping stoves; as stabilizer for lubricating and insulating oils; in the chemical detection of metals; in the preservation of hides; as dye fixative; for the manufacture of explosive compounds; antimicrobial food additive. HUMAN EXPOSURE AND TOXICITY: GI distress frequently is caused by doses >500 mg four times a day, even with enteric coated tablets. Painful and frequent micturition, albuminuria, hematuria, and rashes may result from doses of 4 to 8 g/day given for longer than 3-4 weeks. Inhalation may cause asthma-like reactions in previously sensitized individuals. Vapors or solutions have produced skin irritation. Methenamine does not appear to be linked to con Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for methenamine(SRC), using a log Kow of -2.18(1) and a regression-derived equation(2). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that methenamine is expected to have very high mobility in soil(SRC). The pKa of methenamine is 4.89(3), indicating that this compound will exist partially in cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of methenamine from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.7X10-10 atm-cu m/mole(SRC), derived from its vapor pressure, 6.1X10-4 mm Hg(5), and water solubility, 3.02X10+5 mg/L(6). Methenamine is not expected to volatilize from dry soil surfaces based on its vapor pressure(SRC). Various biolodegradation screening studies have observed between 28-100% degradation of methenamine(7) suggesting that biodegradation is an important environmental fate process in soil(SRC). However, part (or most) of the degradation may be explained by hydrolysis to form formaldehyde and ammonia followed by biodegradation with the degradation rate increasing wi Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that methenamine is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 3.7X10-10 atm-cu m/mole(SRC), derived from its vapor pressure, 6.1X10-4 mm Hg(4), and water solubility, 3.02X10+5 mg/L(5). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow of -2.18(7) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Various biolodegradation screening studies have observed between 28-100% degradation of methenamine(8) suggesting that biodegradation is an important environmental fate process in soil(SRC). However, part (or most) of the degradation may be explained by hydrolysis to form formaldehyde and ammonia followed by biodegradation with the degradation rate increasing with acidity(8). Aqueous hydrolysis half-lives of 13.8 hours and 1.6 hours have been measured at 37.5 °C and pH 5.8 and pH 2 respectively(9). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), methenamine, which has a vapor pressure of 6.1X10-4 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase methenamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 45 minutes(SRC), calculated from its rate constant of 5.1X10-10 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase methenamine may be removed from the air by wet and dry deposition(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Chemical reaction regulator; Monomers; Processing aids not otherwise specified; Binder; Other; Energy Releasers (explosives, motive propellant); Polymerization promoter; Terminator/Blocker; Processing aids, specific to petroleum production; Intermediate; Hardener; Adhesion/cohesion promoter; Not Known or Reasonably Ascertainable; Catalyst Source: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: Methenamine Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used in adhesives, coatings, sealants, and leather preservatives; also used as an anticorrosion agent, antibiotic, dye fixative, chemical stabilizer, and curing agent for formaldehyde resins and rubber; [HSDB] Used as a drug (methenamine) taken by mouth to prevent recurrent urinary tract infections; [Medscape DrugInfo] Used as a hardener for epoxy resins of the bisphenol A type; Used in the tire, rubber, foundry, and phenol-formaldehyde resin industries; Sometimes used in topical drugs and cosmetics; [Kanerva, p. 1811] Used as a formaldehyde releaser for photographic film development. [Kanerva, p. 1054-5] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Molding and Core Making [Category: Foundry]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Plastic Composites Manufacturing [Category: Industry]; Leather Tanning and Processing [Category: Industry]; Photographic Processing [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Anti-Infective Agents, Urinary Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For methenamine (USEPA/OPP Pesticide Code: 045501) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: HMTA is used in the rubber industry to prevent vulcanized rubber from blocking and as a accelerator, as a curing agent for thermosetting resins (particularly phenyl-formaldehyde and urea-formaldehyde resins; in foundry mold castings as part of binder resins, in the production of nitrilotriacetic acid; in the manufacture of adhesives and coatings; in firelogs and briquettes for camping; and in flame-retardent materials. Because of its unique ability to hydrolyze to formaldehyde and ammonia under acidic conditions, it is also used in pharmaceuticals, for intestinal infection, and as a preservative in the food industry. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: In adhesives, coatings, and sealing compounds; as cross-linking agent for hardening phenol-formaldehyde resin and vulcanizing rubber; as corrosion inhibitor for steel; as fuel tablets for camping stoves; as stabilizer for lubricating and insulating oils; in the chemical detection of metals; in the preservation of hides; as dye fixative; for the manufacture of explosive compounds; antimicrobial food additive; detection of metals. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for METHENAMINE (9 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Use (kg; approx.) in Germany (2009): >500; Use (kg; exact) in Germany (2009): 670; Consumption (g per capita; approx.) in Germany (2009): 0.00611; Consumption (g per capita; exact) in Germany (2009): 0.00818; Calculated removal (%): 8.8 Source: NORMAN Suspect List Exchange

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
EMBL-EBI ChEBICorrespondance exacte2026-08-31
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Source officielle et provenance

Source enregistrée
China NMPA banned raw-material catalogues (2021)
Référence de la source
NMPA 2021 Catalogue of Raw Materials Banned for Cosmetics, entry 1282
Identifiant de la fiche source
chemical-1282
Version de la source
NMPA Announcement No. 74 of 2021, effective 2021-05-26
Langue de la source
Chinese with source English/Latin identity
État de la traduction
Official English translation · Traduction anglaise
Date d’effet
2021-05-26
Source mise à jour le
2021-05-26
Instantané vérifié le
2026-08-31 14:13 UTC
Méthode de validation
pdfplumber tables; exact 1,284 + 109 row counts and contiguous source numbering
SHA-256
8848aa3e0c7ac5e74f56fc27927336c4fc2e5bc80137da087c2ca9ba2d2c075e

Notes du jeu de données enregistré

Couverture du jeu de données
All 1,284 banned raw materials and 109 banned plant/animal raw materials effective from 26 May 2021
Note sur l’autorité
Binding NMPA catalogues replacing Tables 1 and 2 of the 2015 Technical Specification

Place de cette fiche dans le jeu de données du marché

1393
fiches China actuelles
1393
fiches marquées Prohibited
1393
fiches de cette version de la source
1249
fiches du marché avec identité CAS

Répartition des statuts

Un texte de conditions est présent pour 1393 des 1393 fiches actuelles. Un champ de conditions vide est interprété selon le type de fiche ci-dessus ; il n’est jamais converti en une affirmation d’utilisation sans restriction.

China contexte du marché

Complete prohibited catalogues plus official-source workflow

Version de la couverture : NMPA 2021 banned catalogues plus dynamic IECIC List I/List II system current since 2025

All 1,284 banned raw materials and 109 banned plant/animal raw materials, plus the official workflow for the dynamic existing-ingredient inventory, other technical restrictions and new ingredients.

Liste de contrôle de vérification

  1. Search the current NMPA IECIC List I and List II by Chinese name and identity.
  2. Check prohibited/restricted and positive lists in the current Safety and Technical Standards.
  3. Review technical purpose, use history and any monitoring period.
  4. Confirm Chinese labelling, safety assessment and filing/registration duties.

Sources officielles du marché

Procédure de vérification et exhaustivité de la fiche

Avant d’utiliser ce résultat dans une décision de conformité

  1. Confirmez que « 乌洛托品 — Methenamine (CAS No. 100-97-0) » et chaque identifiant CAS/CE correspondent à la matière de votre spécification fournisseur.
  2. Search the current NMPA IECIC List I and List II by Chinese name and identity.
  3. Check prohibited/restricted and positive lists in the current Safety and Technical Standards.
  4. Review technical purpose, use history and any monitoring period.
  5. Confirm Chinese labelling, safety assessment and filing/registration duties.
  6. Consignez la version de la source et revérifiez auprès de l’autorité de réglementation avant la fabrication, la notification ou la mise sur le marché.

Champs disponibles dans cette fiche

  • Nom officiel de la substanceDisponible
  • CASDisponible
  • ECDisponible
  • Texte de condition distinctDisponible
  • Date d’effetDisponible
  • Empreinte de l’instantané et méthodeDisponible

Questions auxquelles cette page répond

This official record identifies the substance as prohibited for cosmetic use in the stated market scope. Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. IECIC listing is not blanket approval; absence may require the new cosmetic ingredient route, and restrictions are checked separately.

La fiche cite NMPA 2021 Catalogue of Raw Materials Banned for Cosmetics, entry 1282, version de la source NMPA Announcement No. 74 of 2021, effective 2021-05-26. Ouvrir la source officielle.

Non. Le CAS aide à déterminer l’identité, mais les juridictions peuvent classer différemment une même substance et appliquer des champs d’application, limites, avertissements et dates de transition différents.

Citation stable

乌洛托品 — Methenamine (CAS No. 100-97-0). NMPA 2021 Catalogue of Raw Materials Banned for Cosmetics, entry 1282. China. Source version NMPA Announcement No. 74 of 2021, effective 2021-05-26. CosIng Checker regulatory record: https://cosingchecker.com/fr/regulations/cn/records/12971/

Citez l’autorité de réglementation comme autorité juridique. Cette page est un index structuré de preuves et une aide à la vérification, et non un substitut au texte officiel ni à une évaluation juridique professionnelle.

Interprétation et limites pour China

This official record identifies the substance as prohibited for cosmetic use in the stated market scope.

Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

Comment interpréter le rôle juridique

The cited row forms part of a binding rule or legally incorporated list for this market.

Preuves sur cette page

  • Résultat enregistré : Prohibited
  • Rôle juridique : Binding rule
  • Version de la source : NMPA Announcement No. 74 of 2021, effective 2021-05-26
  • Date d’effet : 2021-05-26

Ce que cela ne prouve pas

IECIC listing is not blanket approval; absence may require the new cosmetic ingredient route, and restrictions are checked separately.

Recherche complémentaire sur la substance auprès de sources faisant autorité

Aucune de ces sources ne prévaut sur la décision de marché ci-dessus.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Rechercher cette identité à la source

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Rechercher cette identité à la source

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Rechercher cette identité à la source

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Rechercher cette identité à la source

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Rechercher cette identité à la source

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Rechercher cette identité à la source

US EPA CompTox CTX APIs

Clé d’API requise pour l’import

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Rechercher cette identité à la source