Aller au contenu principal
IngrédientMise à jour CosIng 19 Avr 2018

SUCCINIC ANHYDRIDE

2,5-Furandione, dihydro-

SUCCINIC ANHYDRIDE figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.

En un coup d’œil

Fonction
Not reported
CAS
108-30-5
EC
203-570-0
Annexes de l’UE
Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.

Preuves réglementaires par marché

Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.

Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.

Détails d’inventaire pour SUCCINIC ANHYDRIDE

Nom INCI

SUCCINIC ANHYDRIDE

Description

2,5-Furandione, dihydro-

Provenance de la fiche

Référence d’inventaire
95938
Identité importée
SUCCINIC ANHYDRIDE
Mise à jour de la source
19/04/2018
Notes de source CosIng de la Commission européenne

Données clés

Restriction
—
Fonction

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 108-30-5
CAS 108-30-5PubChem CID 7922

Succinic anhydride

Succinic anhydride is a cyclic dicarboxylic anhydride and a tetrahydrofurandione. It is functionally related to a succinic acid. — ChEBI

Nom IUPAC
oxolane-2,5-dione
Formule moléculaire
C4H4O3
Masse moléculaire
100.07 g/mol
Masse exacte
100.016043985 Da
XLogP3
-0,5
Surface polaire topologique
43,4 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
3
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Succinic acid anhydrideSuccinyl oxideDihydro-2,5-furandione2,5-DiketotetrahydrofuranButanedioic anhydrideSuccinyl anhydride2,5-Furandione, dihydro-Rikacid SA
16 autres noms signalés
Tetrahydro-2,5-dioxofuran2,5-DioxotetrahydrofuranTetrahydro-2,5-furandioneNCI-C556966RF4O17Z8JNSC-8518CHEBI:36595RefChem:6265BERNSTEINSAUREANHYDRID203-570-0dihydrofuran-2,5-dioneBernsteinsaure-anhydridDihydro-furan-2,5-dionetetrahydrofuran-2,5-dioneNSC 85182,5(3H,4H)-Furandione
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant7922

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P233, P260, P261, P264, P264+P265, P270, P271, P272, P280, P284, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P321, P330, P333+P317, P342+P316, P362+P364, P363, P403, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for 0.2% (2 of 1275) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (98.5%): Harmful if swallowed [Warning Acute toxicity, oral]; H314 (18.8%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317 (20.8%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H318 (16.5%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H319 (81.1%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H334 (20.8%): May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H335 (90.6%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P233, P260, P261, P264, P264+P265, P270, P271, P272, P280, P284, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P351+P338, P305+P354+P338, P316, P317, P319, P321, P330, P333+P317, P337+P317, P342+P316, P362+P364, P363, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1275 reports by companies from 39 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 2 of 1275 reports by companies.; There are 38 notifications provided by 1273 of 1275 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P261, P272, P273, P280, P302+P352, P321, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Danger Source: NITE-CMC
  • Environmental Bioconcentration: Bioconcentration of succinic anhydride in aquatic organisms is unlikely due its rapid hydrolysis(1). Experimental bioconcentration factors (chemical concentration in fish/chemical concentration in water) of succinic anhydride in fish (Golden ide) were less than 10(2,3). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: The half-life for the hydrolysis of succinic anhydride is 4.3 minutes(SRC), based on a rate constant of 0.0027 1/sec at 25 °C(1). The major fate of succinic anhydride in soil is expected to be hydrolysis (SRC). Succinic anhydride is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.5X10-3 mm Hg(2). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: The half-life for the hydrolysis of succinic anhydride is 4.3 minutes(SRC), based on a rate constant of 0.0027 1/sec at 25 °C(1). The major fate of succinic anhydride in aquatic environments is expected to be hydrolysis(SRC). Bioconcentration of succinic anhydride in aquatic organisms is unlikely due its rapid hydrolysis(SRC). Approximately 78% of the succinic anhydride added to activated sewage sludge was biodegraded within five days(2,3); however, hydrolysis is expected to be the principal fate of succinic anhydride in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), succinic anhydride, which has a vapor pressure of 1.5X10-3 mm Hg at 25 °C(2) is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase succinic anhydride is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 70 days (SRC), calculated from its rate constant of 4.56X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Ingrédients ayant des fonctions de formulation communes

Sources officielles et scientifiques complémentaires

11 bases de données externes pour vérifier cette identité

Comment SUCCINIC ANHYDRIDE apparaît dans l’inventaire CosIng

L’inventaire CosIng répertorie SUCCINIC ANHYDRIDE comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.

SUCCINIC ANHYDRIDE est aussi associé à 1 fonction cosmétique dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.

Questions fréquentes

SUCCINIC ANHYDRIDE figure dans l’inventaire des ingrédients CosIng de l’UE, sans fiche de restriction d’annexe directement associée pour le moment. L’absence de lien avec une annexe ne garantit pas une utilisation sans restriction ; vérifiez toujours auprès de la base de données officielle CosIng actuelle avant de formuler.

Selon l’inventaire CosIng de l’UE, SUCCINIC ANHYDRIDE porte la ou les désignations de fonction suivantes :

Le CAS 108-30-5 peut apparaître dans plusieurs fiches d’annexe de l’UE. La page de recherche par CAS présente toutes les entrées des annexes II à VI partageant cet identifiant, ce qui est utile pour déterminer le statut réglementaire transversal aux annexes d’une même substance chimique.

Utilisez le vérificateur INCI pour analyser une liste d’ingrédients complète sur des marchés sélectionnés, ou comparez cette substance sur tous les jeux de données de marchés pris en charge.

Note de source pour SUCCINIC ANHYDRIDE

Cette page reproduit l’entrée d’inventaire CosIng de SUCCINIC ANHYDRIDE issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.

Utilisez cette page d’inventaire pour étudier SUCCINIC ANHYDRIDE et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète pour détecter SUCCINIC ANHYDRIDE et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.

Vérificateur INCI

Rechercher des ingrédients similaires

Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à SUCCINIC ANHYDRIDE, à ses identifiants ou à des variantes de nom proches.

Rechercher