Aller au contenu principal
IngrédientMise à jour CosIng 15 Oct 2010

OCTENE

1-Octene

OCTENE figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.

En un coup d’œil

Fonction
Solvent
CAS
111-66-0
EC
203-893-7
Annexes de l’UE
Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.

Preuves réglementaires par marché

Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.

Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.

Détails d’inventaire pour OCTENE

Nom INCI

OCTENE

Description

1-Octene

Provenance de la fiche

Référence d’inventaire
57558
Identité importée
OCTENE
Mise à jour de la source
15/10/2010
Notes de source CosIng de la Commission européenne

Données clés

Restriction
—
Fonction
  • SOLVENT

    Dissolving other components of cosmetics. Solvents are usually liquids (aqueous and nonaqueous).

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 111-66-0
CAS 111-66-0PubChem CID 8125

1-Octene

1-octene is an octene with an unsaturation C-1. — ChEBI

Nom IUPAC
oct-1-ene
Formule moléculaire
C8H16
Masse moléculaire
112.21 g/mol
Masse exacte
112.125200510 Da
XLogP3
4,6
Surface polaire topologique
0,0 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
0
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Caprylene1-Octylenen-1-Octene1-CapryleneOctylenealpha-Octenealpha-OctyleneE5VK21B9RC
16 autres noms signalés
NSC-8457CHEBI:46708RefChem:435206203-893-7OCTENE-1Octene.alpha.-Octene.alpha.-OctyleneNSC 8457Neodene 81-?Octene1-C8H161-Octene, 98%1-Octene, analytical standard1-n-octeneOctene, 1-
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8125

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: INHALATION: remove from exposure; support respiration.; INGESTION: do NOT induce vomiting. (USCG, 1999) Source: CAMEO Chemicals
  • Note: This chemical does not meet GHS hazard criteria for 5.1% (102 of 2014) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H225 (94.9%): Highly Flammable liquid and vapor [Danger Flammable liquids]; H304 (94.8%): May be fatal if swallowed and enters airways [Danger Aspiration hazard]; H315 (17.7%): Causes skin irritation [Warning Skin corrosion/irritation]; H411 (17.7%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P264, P273, P280, P301+P316, P302+P352, P303+P361+P353, P321, P331, P332+P317, P362+P364, P370+P378, P391, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2014 reports by companies from 23 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 102 of 2014 reports by companies.; There are 22 notifications provided by 1912 of 2014 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Note: This chemical does not meet GHS hazard criteria for 3.5% (4 of 113) of reports. Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H225 (96.5%): Highly Flammable liquid and vapor [Danger Flammable liquids]; H304 (96.5%): May be fatal if swallowed and enters airways [Danger Aspiration hazard]; H400 (94.7%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (94.7%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P273, P280, P301+P316, P303+P361+P353, P331, P370+P378, P391, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 113 reports by companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 4 of 113 reports by companies.; There are 3 notifications provided by 109 of 113 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H304: May be fatal if swallowed and enters airways [Danger Aspiration hazard]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P301+P316, P302+P352, P303+P361+P353, P304+P340, P317, P319, P321, P331, P332+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 660 was calculated for 1-octene(SRC), using a log Kow of 4.57(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 507(SRC), determined from a structure estimation method(2), indicates that 1-octene should have low to moderate mobility in soil(SRC). Volatilization of 1-octene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 0.627 atm-cu m/mole(SRC) from its vapor pressure, 17.4 mm Hg(3), and water solubility, 4.1 mg/l(4). The potential for volatilization of 1-octene from dry soil surfaces may exist(SRC) based upon a vapor pressure of 17.4 mm Hg(3). However, adsorption to soil is expected to attenuate volatilization(SRC). Based on pure culture studies, 1-octene has the potential to biodegrade under aerobic conditions in soil(5,6). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 510(SRC), determined from an estimation method(2), indicates that 1-octene should adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 0.627 atm-cu m/mole(SRC) from its vapor pressure, 17.4 mm Hg(4), and water solubility, 4.1 mg/l(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 3.1 hours and 4.2 days, respectively(SRC). The volatilization half-life from a model pond 2 m deep is estimated to be 37 hrs ignoring adsorption; when considering maximum adsorption, the volatilization half-life increases to 95 hrs(6). According to a classification scheme(7), a BCF of 660(SRC) estimated from its log Kow of 4.57(8) and a regression-derived equation(9), suggests the potential for bioconcentration in aquatic organisms is high. Based on pure culture studies, 1-octene has the potential to biodegrade under aerobic conditions in water(10,11). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 1-octene, which has a vapor pressure of 17.4 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 1-octene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 3.9 hrs(SRC), calculated from its rate constant of 3.X10-11 cu cm/molecule-sec at 25 °C(3) determined using a structure estimation method(3). Vapor-phase 1-octene is also degraded in the atmosphere by reaction with ozone molecules(SRC); the half-life for this reaction in air is estimated to be 23 hrs(SRC), calculated from its rate constant of 1.2X10-17 cu cm/molecule-sec at 25 °C(3) determined using a structure estimation method(3). Source: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Used as a plasticizer, in surfactants, and as a co-monomer in the production of polyethylene; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Sources/Uses: Present in gasoline and emitted in exhausts of automobiles, turbines, and breweries; Detected in food, e.g., hot cooking oils; Octene includes the following isomers: 1-Octene, 2-Octene (E), 2-Octene (Z), 3-Octene (E), 3-Octene (Z), 4-Octene (E), 4-Octene (Z); Used to make polymers, surfactants, and detergents; 1-Octene used as a chemical intermediate, plasticizer, surfactant, and comonomer to produce polyethylene; [HSDB] Di-n-butene (25377-83-7) is a mixture of octenes with boiling points in the range of 116-126 deg C; [Ullmann]. Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Organic synthesis, plasticizer, surfactants Source: Hazardous Substances Data Bank (HSDB)
  • Uses: As a comonomer in the production of high density polyethylene and linear low density polyethylene. The addition of 1-octene is used to modify the density and other properties of the polymer. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Used in the polymer, surfactant and detergent industries Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Preuves officielles sur le nom d’ingrédient de l’UE

Le nom de l’ingrédient correspond exactement au glossaire officiel 2025 de l’UE des dénominations communes d’ingrédients.

Ingrédients ayant des fonctions de formulation communes

Sources officielles et scientifiques complémentaires

11 bases de données externes pour vérifier cette identité

Comment OCTENE apparaît dans l’inventaire CosIng

L’inventaire CosIng répertorie OCTENE comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.

OCTENE est aussi associé à 1 fonction cosmétique dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.

Questions fréquentes

OCTENE figure dans l’inventaire des ingrédients CosIng de l’UE, sans fiche de restriction d’annexe directement associée pour le moment. L’absence de lien avec une annexe ne garantit pas une utilisation sans restriction ; vérifiez toujours auprès de la base de données officielle CosIng actuelle avant de formuler.

Selon l’inventaire CosIng de l’UE, OCTENE porte la ou les désignations de fonction suivantes :

Le CAS 111-66-0 peut apparaître dans plusieurs fiches d’annexe de l’UE. La page de recherche par CAS présente toutes les entrées des annexes II à VI partageant cet identifiant, ce qui est utile pour déterminer le statut réglementaire transversal aux annexes d’une même substance chimique.

Utilisez le vérificateur INCI pour analyser une liste d’ingrédients complète sur des marchés sélectionnés, ou comparez cette substance sur tous les jeux de données de marchés pris en charge.

Note de source pour OCTENE

Cette page reproduit l’entrée d’inventaire CosIng de OCTENE issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.

Utilisez cette page d’inventaire pour étudier OCTENE et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète pour détecter OCTENE et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.

Vérificateur INCI

Rechercher des ingrédients similaires

Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à OCTENE, à ses identifiants ou à des variantes de nom proches.

Rechercher