Aller au contenu principal
IngrédientMise à jour CosIng 2 Mar 2011

HEXYL METHYL KETONE

Octan-2-one

HEXYL METHYL KETONE figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.

En un coup d’œil

Fonction
Perfuming
CAS
111-13-7
EC
203-837-1
Annexes de l’UE
Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.

Preuves réglementaires par marché

Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.

Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.

Détails d’inventaire pour HEXYL METHYL KETONE

Nom INCI

HEXYL METHYL KETONE

Description

Octan-2-one

Provenance de la fiche

Référence d’inventaire
40248
Identité importée
HEXYL METHYL KETONE
Mise à jour de la source
02/03/2011
Notes de source CosIng de la Commission européenne

Données clés

Restriction
—
Fonction
  • PERFUMING

    Used for perfume and aromatic raw materials.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 111-13-7
CAS 111-13-7PubChem CID 8093

2-Octanone

2-octanone is a methyl ketone that is octane substituted by an oxo group at position 2. It has a role as a metabolite. — ChEBI

Nom IUPAC
octan-2-one
Formule moléculaire
C8H16O
Masse moléculaire
128.21 g/mol
Masse exacte
128.120115130 Da
XLogP3
2,4
Surface polaire topologique
17,1 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
1
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Hexyl methyl ketoneMethyl hexyl ketonen-Hexyl methyl ketoneMethyl n-hexyl ketone2-OxooctaneFEMA No. 2802FEMA Number 2802J2G84H29AF
16 autres noms signalés
NSC-3712CHEBI:87434RefChem:88855203-837-1Methvlhexanone2-Octanone (natural)HSDB 5545NSC 3712EINECS 203-837-1BRN 0635843UNII-J2G84H29AFAI3-05617octanone-2octane-2-one2- octanonen-C6H13COCH3
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8093

Attributed physical-property, hazard, environmental and use annotations.

  • Note: This chemical does not meet GHS hazard criteria for 0.8% (15 of 1970) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (99%): Flammable liquid and vapor [Warning Flammable liquids] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1970 reports by companies from 15 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 15 of 1970 reports by companies.; There are 14 notifications provided by 1955 of 1970 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264+P265, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P319, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF value of 13 was calculated for 2-octanone(SRC), using a log Kow of 2.37(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF value suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 460(SRC), determined from a log Kow value of 2.37(2) and a regression-derived equation(3), indicates that 2-octanone is expected to have moderate mobility in soil(SRC). Aerobic biodegradation of this compound is expected. 2-Octanone, inoculated with acclimated sludge, had BOD values from 33%(4) to 48%(5,6) of the theoretical oxygen demand after 5 days incubation. Volatilization of 2-octanone from moist soil surfaces in expected to be an important fate process(SRC) given a Henry's Law constant of 1.88X10-4 atm-cu m/mole(7). 2-Octanone is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.35 mm Hg(8). Theoretical BOD values of 33%(8) and 48%(9) suggest that biodegradation may occur in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 460(SRC), determined from a log Kow value of 2.37(2) and a regression-derived equation(3), indicates that 2-octanone is expected to adsorb to suspended solids and sediment(SRC). In water, 2-octanone has a measured volatilization flux of 40 g/min/sq m; some attenuation of this process is expected due to the gas-film interface(4). A measured Henry's Law constant of 1.88X10-4 atm-cu m/mole(5) also indicates that this compound will volatilize from water surfaces. Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 5 hours and 6 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 13(SRC), from its log Kow(2), and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low. 2-Octanone is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). Theoretical BOD values of 33%(8) and 48%(9,10) suggest that biodegradation may occur in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2-octanone, which has a vapor pressure of 1.35 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2-octanone is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 1.6 days(3). 2-Octanone does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight(4). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Ingrédients ayant des fonctions de formulation communes

Sources officielles et scientifiques complémentaires

11 bases de données externes pour vérifier cette identité

Comment HEXYL METHYL KETONE apparaît dans l’inventaire CosIng

L’inventaire CosIng répertorie HEXYL METHYL KETONE comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.

HEXYL METHYL KETONE est aussi associé à 1 fonction cosmétique dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.

Questions fréquentes

HEXYL METHYL KETONE figure dans l’inventaire des ingrédients CosIng de l’UE, sans fiche de restriction d’annexe directement associée pour le moment. L’absence de lien avec une annexe ne garantit pas une utilisation sans restriction ; vérifiez toujours auprès de la base de données officielle CosIng actuelle avant de formuler.

Selon l’inventaire CosIng de l’UE, HEXYL METHYL KETONE porte la ou les désignations de fonction suivantes :

Le CAS 111-13-7 peut apparaître dans plusieurs fiches d’annexe de l’UE. La page de recherche par CAS présente toutes les entrées des annexes II à VI partageant cet identifiant, ce qui est utile pour déterminer le statut réglementaire transversal aux annexes d’une même substance chimique.

Utilisez le vérificateur INCI pour analyser une liste d’ingrédients complète sur des marchés sélectionnés, ou comparez cette substance sur tous les jeux de données de marchés pris en charge.

Note de source pour HEXYL METHYL KETONE

Cette page reproduit l’entrée d’inventaire CosIng de HEXYL METHYL KETONE issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.

Utilisez cette page d’inventaire pour étudier HEXYL METHYL KETONE et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète pour détecter HEXYL METHYL KETONE et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.

Vérificateur INCI

Rechercher des ingrédients similaires

Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à HEXYL METHYL KETONE, à ses identifiants ou à des variantes de nom proches.

Rechercher