TOLUENE SULFONIC ACID
Toluene-4-sulphonic acid
TOLUENE SULFONIC ACID figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.
En un coup d’œil
- Fonction
- Surfactant - cleansing, surfactant - hydrotrope
- CAS
- 104-15-4
- EC
- 203-180-0
- Annexes de l’UE
- Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.
Preuves réglementaires par marché
Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.
Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.
Détails d’inventaire pour TOLUENE SULFONIC ACID
Nom INCI
TOLUENE SULFONIC ACID
Description
Toluene-4-sulphonic acid
Provenance de la fiche
- Référence d’inventaire
- 38634
- Identité importée
- TOLUENE SULFONIC ACID
- Mise à jour de la source
- 15/10/2010
Fiches d’annexe pour TOLUENE SULFONIC ACID
Données clés
- SURFACTANT - CLEANSING
Wetting body surfaces, emulsifying or solubilizing oils, and suspending soil (generally, such ingredients contribute to the foaming and lathering properties of cleansing products).
- SURFACTANT - HYDROTROPE
Enhancing the water solubility of another surfactant.
Identité et propriétés chimiques

p-Toluenesulfonic acid
Toluene-4-sulfonic acid is an arenesulfonic acid that is benzenesulfonic acid in which the hydrogen at position 4 is replaced by a methyl group. It is a member of toluenes and an arenesulfonic acid. It is a conjugate acid of a toluene-4-sulfonate. — ChEBI
- Nom IUPAC
- 4-methylbenzenesulfonic acid
- Formule moléculaire
- C7H8O3S
- Masse moléculaire
- 172.20 g/mol
- Masse exacte
- 172.01941529 Da
- XLogP3
- 1,7
- Surface polaire topologique
- 62,8 Ų
- Donneurs de liaisons hydrogène
- 1
- Accepteurs de liaisons hydrogène
- 3
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:27849
- ChEMBL:CHEMBL541253
- EPA DTXSID:DTXSID0026701
- PubMed:23125819
- PubMed:23007546
- PubMed:22966690
- PubMed:22961309
- PubMed:22926535
- PubMed:22925760
- PubMed:22878001
- PubMed:22840030
- PubMed:22822714
- PubMed:22818945
- PubMed:22808747
- PubMed:22798860
Preuves issues de bases de données scientifiques complémentaires
EMBL-EBI ChEBI
toluene-4-sulfonic acid
An arenesulfonic acid that is benzenesulfonic acid in which the hydrogen at position 4 is replaced by a methyl group.
- Formule
- C7H8O3S
- Masse moyenne
- 172.205 g/mol
- Masse monoisotopique
- 172.01942 Da
- Charge formelle
- 0
- toluenes — is a (CHEBI:27024)
- arenesulfonic acid — is a (CHEBI:33555)
- toluenes — is a (CHEBI:27024)
- arenesulfonic acid — is a (CHEBI:33555)
- toluene-4-sulfonate — is conjugate acid of (CHEBI:27023)
Noms supplémentaires validés
Références croisées de cette source
Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Source mise à jour le: 2015-02-12. Récupéré le: 2026-08-31. Ouvrir la fiche source
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 140 °C @ 20 MM HG Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: Boiling point = 38 °C Source: Hazardous Substances Data Bank (HSDB)
- Color/Form: MONOCLINIC LEAFLETS OR PRISMS Source: Hazardous Substances Data Bank (HSDB)
- Density: 1.45 at 77 °F (USCG, 1999) - Denser than water; will sink Source: CAMEO Chemicals
- Density: Relative density (water = 1): 1.24 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Dissociation Constants: -1.34 Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: 363 °F (184 °C) (CLOSED CUP) Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: 184 °C c.c. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- LogP: 0.9 (calculated) Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 221 °F (USCG, 1999) Source: CAMEO Chemicals
- Melting Point: 106-107 °C Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Melting Point: 106-107 °C /ANHYDROUS/ Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: MELTING POINT: 38 °C /METASTABLE FORM/ Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: Melting point = 106 °C /monohydrate/; 93 °C /trihydrate/ Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: 104.50 °C. @ 760.00 mm Hg Source: Human Metabolome Database (HMDB)
- Melting Point: 106-107 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: Toluene sulfonic acid, liquid, with more than 5% free sulfuric acid appears as colorless to black solid. Odorless or nearly odorless. (USCG, 1999) Source: CAMEO Chemicals
- Physical Description: Liquid; Dry Powder; Liquid; Dry Powder; CBI; Large Crystals Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless hygroscopic solid; [ICSC] Colorless to black solid with no or little odor; [CHRIS] Off-white crystals; [Integra MSDS] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS HYGROSCOPIC FLAKES. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: ABOUT 67 G/100 ML WATER; SOL IN ALCOHOL, ETHER Source: Hazardous Substances Data Bank (HSDB)
- Solubility: VERY SOL IN WATER /SODIUM SALT/ Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water, g/100ml at 25 °C: 67 (freely soluble) Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.0000027 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Exposure Routes: Serious local effects by all routes of exposure. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: EYES: wash thoroughly with copious amounts of water for at least 15 min.; call physician if irritation persists.; SKIN: wash thoroughly with large amounts of water for at least 15 min.; INGESTION: give large amount of water. (USCG, 1999) Source: CAMEO Chemicals
- Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H314 (42.3%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H315 (62.1%): Causes skin irritation [Warning Skin corrosion/irritation]; H318 (37%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H319 (62.1%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (87%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P260, P261, P264, P264+P265, P271, P280, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P351+P338, P305+P354+P338, P316, P317, P319, P321, P332+P317, P337+P317, P362+P364, P363, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 1895 reports by companies from 57 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Danger Source: NITE-CMC
- GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure] Source: NITE-CMC
- Precautionary Statement Codes: P260, P264, P264+P265, P270, P280, P301+P317, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P308+P316, P316, P317, P321, P330, P363, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Signal: Warning Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
- Cosmetic Ingredient Review Conclusion: Toluene Sulfonic Acid...safe as cosmetic ingredient in the present practice of use and concentration as described in this safety assessment, when formulated to be nonirritating Source: Cosmetic Ingredient Review (CIR)
- Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Source: Cosmetic Ingredient Review (CIR)
- Environmental Bioconcentration: Using an estimated log Kow of -0.62(1), one would estimate a BCF of 0.2 for p- toluenesulfonic acid using a recommended regression equation(2). This would indicate that p-toluenesulfonic acid would not bioconcentrate in aquatic organisms(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: p-Toluenesulfonic acid is a strong acid (pKa = -1.34(1)) and is completely dissociated and highly soluble (about 620 g/L(2)) in water. It would be expected to leach fairly rapidly. Its biodegradation in soil is unknown(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Once released into the aquatic compartment, p- toluenesulfonic acid will not be transported into the sediment or volatilize to the atmosphere. Based on the results of biodegradation screening studies(1-8), it may slowly biodegrade if acclimated microbial populations are present. p- Toluenesulfonic acid would not be expected to bioconcentrate in aquatic organisms(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: Based on its estimated vapor pressure, 2.7X10-6 mm Hg at 25 °C(2), p-toluenesulfonic acid should exist in the atmosphere both as an aerosol and as a vapor(4). Vapor-phase p- toluenesulfonic acid will react with photochemically-produced hydroxyl radicals resulting in an estimated half-life of 11.8 days (3,SRC). p-Toluenesulfonic acid is highly soluble in water, 620,000 mg/L(1), and therefore should be scavenged by rain(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Surfactant (surface active agent); Solvent; Catalyst Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Catalyst; Intermediate; Solvent; Other; Monomers; Surfactant (surface active agent) Source: EPA Chemical Data Reporting (CDR)
- Cosmetic Ingredient Review Link: CIR ingredient: Toluene Sulfonic Acid Source: Cosmetic Ingredient Review (CIR)
- Sources/Uses: Used in the chemical industry as a catalyst; also used in the manufacturing of textile dyes, drugs, cleaning agents, polymers, and paints; [HSDB] Used in photography (color bleaching); [www.ci.tucson.az.us/arthazards/medium.html] Used as a catalyst (with applications including resins in foundry cores), as a curing agent for resins, as a descaling agent (industrial metal cleaners), in electroplating bathes, plastics, dyes, pharmaceutical intermediates, food packaging adhesives, and as a coupling and wetting agent; [EPA ChAMP] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Acid and Alkali Cleaning of Metals [Category: Clean]; Molding and Core Making [Category: Foundry]; Electroplating [Category: Plate]; Working with Glues and Adhesives [Category: Other]; Plastic Composites Manufacturing [Category: Industry]; Photographic Processing [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: /USED AS REAGENT IN/ KIRSTEN MODIFICATION OF KLEBER METHOD (FOR LEMON OIL). Source: Hazardous Substances Data Bank (HSDB)
- Uses: Manufacture of 4-formylbenzenesulfonic acid, p-sulfobenzoic acid, 2-chlorotoluene-4-sulfonic acid, and 4-(chloromethyl)phenylmethanesulfonic acid Source: Hazardous Substances Data Bank (HSDB)
- Uses: Effect solubility of disperse dyes, initiator for catalytic polymerization of caprolactam, catalyst for dimerization of alpha- methylstyrene. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Manufacture of dyes and oral antidiabetic drugs; conversion to sodium and ammonium salts for manufacture of hydrotropes. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Catalyst in coatings, paint, polymer, and textile industries. Stabilizer for monomers and polymers, pharmaceutical intermediate, cleaning agents, plating additive. Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| EMBL-EBI ChEBI | Correspondance exacte | 2026-08-31 |
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Preuves officielles sur le nom d’ingrédient de l’UE
Le nom de l’ingrédient correspond exactement au glossaire officiel 2025 de l’UE des dénominations communes d’ingrédients.
Preuves d’inventaire associées
Ingrédients ayant des fonctions de formulation communes
Sources officielles et scientifiques complémentaires
11 bases de données externes pour vérifier cette identité
Chaque lien lance une recherche de cette identité dans la source concernée. Ce qu’est chaque source et sa valeur juridique
Comment TOLUENE SULFONIC ACID apparaît dans l’inventaire CosIng
L’inventaire CosIng répertorie TOLUENE SULFONIC ACID comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.
TOLUENE SULFONIC ACID est aussi associé à 2 fonctions cosmétiques dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.
Questions fréquentes
Note de source pour TOLUENE SULFONIC ACID
Cette page reproduit l’entrée d’inventaire CosIng de TOLUENE SULFONIC ACID issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.
Utilisez cette page d’inventaire pour étudier TOLUENE SULFONIC ACID et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.
Outils et étapes suivantes
Vérifiez votre formule
Analysez une liste INCI complète pour détecter TOLUENE SULFONIC ACID et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.
Vérificateur INCIRechercher des ingrédients similaires
Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à TOLUENE SULFONIC ACID, à ses identifiants ou à des variantes de nom proches.
Rechercher