Aller au contenu principal
IngrédientMise à jour CosIng 15 Oct 2010

M-CRESOL

Phenol, 3-methyl-

M-CRESOL figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.

En un coup d’œil

Fonction
Antimicrobial, perfuming
CAS
108-39-4
EC
203-577-9
Annexes de l’UE
Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.

Preuves réglementaires par marché

Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.

Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.

Détails d’inventaire pour M-CRESOL

Nom INCI

M-CRESOL

Description

Phenol, 3-methyl-

Provenance de la fiche

Référence d’inventaire
35177
Identité importée
M-CRESOL
Mise à jour de la source
15/10/2010
Notes de source CosIng de la Commission européenne

Données clés

Restriction
—
Fonction
  • ANTIMICROBIAL

    Preventing and/or slowing down microbial growth.

  • PERFUMING

    Used for perfume and aromatic raw materials.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 108-39-4
CAS 108-39-4PubChem CID 342

M-Cresol

M-cresol is a cresol with the methyl substituent at position 3. It is a minor urinary metabolite of toluene. It has a role as a human xenobiotic metabolite. — ChEBI

Nom IUPAC
3-methylphenol
Formule moléculaire
C7H8O
Masse moléculaire
108.14 g/mol
Masse exacte
108.057514874 Da
XLogP3
2,0
Surface polaire topologique
20,2 Ų
Donneurs de liaisons hydrogène
1
Accepteurs de liaisons hydrogène
1
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

MetacresolPhenol, 3-methyl-3-hydroxytoluenemeta-cresolm-methylphenol3-cresolm-kresolm-cresylic acid
16 autres noms signalés
m-toluol1-hydroxy-3-methylbenzenem-oxytoluenem-HydroxytolueneFranklin CresolisFEMA No. 35301-Methyl-3-hydroxybenzeneRover's Dog Shampoom-Cresolehydroxy-3-methylbenzene3-methyl phenol3-methyl-1-hydroxybenzeneNSC-8768GGO4Y809LOCelcure Dry Mix (chemicals for wood preserving)CHEBI:17231
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant342

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whene Source: CAMEO Chemicals
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash immediately - If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P260, P262, P264, P270, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P330, P361+P364, P363, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (> 99.9%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H412 (10.1%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P260, P262, P264, P270, P273, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P330, P361+P364, P363, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2818 reports by companies from 21 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P260, P262, P264, P264+P265, P270, P273, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P308+P316, P316, P317, P318, P319, P321, P330, P361+P364, P363, P370+P378, P403, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P260, P261, P264, P264+P265, P270, P271, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P308+P316, P316, P317, P318, P319, P321, P330, P362+P364, P363, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Health Effects: Acute exposure to cholinesterase inhibitors can cause a cholinergic crisis characterized by severe nausea/vomiting, salivation, sweating, bradycardia, hypotension, collapse, and convulsions. Increasing muscle weakness is a possibility and may result in death if respiratory muscles are involved. Accumulation of ACh at motor nerves causes overstimulation of nicotinic expression at the neuromuscular junction. When this occurs symptoms such as muscle weakness, fatigue, muscle cramps, fasciculation, and paralysis can be seen. When there is an accumulation of ACh at autonomic ganglia this causes overstimulation of nicotinic expression in the sympathetic system. Symptoms associated with this are hypertension, and hypoglycemia. Overstimulation of nicotinic acetylcholine receptors in the central nervous system, due to accumulation of ACh, results in anxiety, headache, convulsions, ataxia, depression of respiration and circulation, tremor, general weakness, and potentially coma. When there is expression of muscarinic overstimulation due to excess acetylcholine at muscarinic acetylcholine receptors symptoms of visual disturbances, tightness in chest, wheezing due to bronchoconstriction, incre Source: Toxin and Toxin Target Database (T3DB)
  • NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Conclusion: The CIR Expert panel concludes Sodium p-Chloro-m-Cresol, p-Chloro-m-Cresol, Chlorothymol, m-Cresol, o-Cresol, Isopropyl Cresols, Thymol, o-Cymen-5-ol, Cavacrol are safe at concentrations up to 0.5% in cosmetics; however, the available data are insufficient to support the safety of p-Cresol and Mixed Cresols for use in cosmetic products. Source: Cosmetic Ingredient Review (CIR)
  • Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: IDENTIFICATION AND USE: m-Cresol is colorless, yellowish liquid. It is used as a bactericide for control of crown gall and olive knot on certain fruit and nut trees and ornamentals and the genetic/physiological disorder burr knot on apples. Currently, one product is registered which contains both m-cresol and xylenol. Used as disinfectant/bacteriocide/germicide for animal pathogenic bacteria (G- and G+ vegetative) in households, sickrooms, hospitals, veterinary clinics, and veterinary hospitals; on surgical instruments, diagnostic instruments/equipment and on hospital critical rubber/plastic items. Used as an insecticide and miticide on dogs for treatment of lice and fleas. It is also used for making synthetic resins; in photographic developers, explosives. Additionally, m-cresol is chemical intermediate for thymol used in cough/cold medicinals, synthetic pyrethroid insecticides, 3-methyl-6-t-butylphenol, trinitro-m-cresol for explosives, and phenolic resins; disinfectant ingredient; ore flotation agent; solvent. m-Cresol, either pure or mixed with p-cresol, is important in the production of contact herbicides. m-Cresol is also a precursor to the pyrethroid insecticides. Furthermor Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: m-Cresol is a cholinesterase or acetylcholinesterase (AChE) inhibitor. A cholinesterase inhibitor (or 'anticholinesterase') suppresses the action of acetylcholinesterase. Because of its essential function, chemicals that interfere with the action of acetylcholinesterase are potent neurotoxins, causing excessive salivation and eye-watering in low doses, followed by muscle spasms and ultimately death. Nerve gases and many substances used in insecticides have been shown to act by binding a serine in the active site of acetylcholine esterase, inhibiting the enzyme completely. Acetylcholine esterase breaks down the neurotransmitter acetylcholine, which is released at nerve and muscle junctions, in order to allow the muscle or organ to relax. The result of acetylcholine esterase inhibition is that acetylcholine builds up and continues to act so that any nerve impulses are continually transmitted and muscle contractions do not stop. Among the most common acetylcholinesterase inhibitors are phosphorus-based compounds, which are designed to bind to the active site of the enzyme. The structural requirements are a phosphorus atom bearing two lipophilic groups, a leaving group (such as a halid Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: Based on a 3-day exposure period of golden ide fish (Leuciscus idus melanotus) to 0.05 mg/L m-cresol, m-cresol had a BCF value of 20(1). A BCF of 10.7 has also been reported for zebrafish (Danio rerio)(2). According to a classification scheme(3), these BCF values suggest bioconcentration in aquatic organisms is low. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), a m-cresol Koc value of 34.58 in a clay loam soil(2) and a cresol Koc range of 27-251 in five different soils (para-isomer)(3) indicate that m-cresol is expected to have very high to moderate mobility in soil(SRC). Volatilization of m-cresol from moist soil surfaces may occur slowly(SRC) given a Henry's Law constant of 8.6X10-7 atm-cu m/mole(4). m-Cresol may volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.11 mm Hg at 25 °C(5). Based upon available test results, including OECD screening methods, m-cresol can be considered as being readily biodegradable under aerobic conditions(6). m-Cresol is expected to biodegrade readily in soils based on biodegradation half-lives of 0.6 and 11.3 days reported for 2 agricultural soils(7). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), a m-cresol Koc value of 34.58 in a clay loam soil(2) and a cresol Koc range of 27-251 in five different soils (para-isomer)(3) indicate that m-cresol is not expected to adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is expected to occur slowly(4) based upon a Henry's Law constant of 8.56X10-7 atm-cu m/mole(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 45 and 327 days, respectively(SRC). According to a classification scheme(6), BCF values of 20 and 10.7 reported for m-cresol in golden ide fish (Leuciscus idus melanotus)(7) and zebrafish (Danio rerio)(8), respectively, suggest that bioconcentration in aquatic organisms is low. Based upon available test results, including OECD screening methods, m-cresol can be considered as being readily biodegradable under aerobic conditions(7). Aerobic biodegradation is considered to be the major removal mechanism for m-cresol in the hydrosphere(7). m-Cresol is expected to biodegrade in water based on reported half-lives in the range of 2 to 29 days (aerobic water) and 15 to Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), m-cresol, which has a vapor pressure of 0.11 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase m-cresol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 6 hours(SRC) from its rate constant of 5.88X10-11 cu cm/molecule-sec at 21 °C(3). Vapor-phase m-cresol is also degraded in the atmosphere by reaction with nitrate radicals(SRC); the half-life for this reaction in air is estimated to be 4 minutes(SRC) from its rate constant of 1.21X10-11 cu cm/molecule-sec at 25 °C(3). The nitrate radical is the dominant atmospheric oxidant during the night-time in most atmospheric environments(4), therefore, night-time degradation appears to be a major atmospheric loss process for m-cresol(SRC). m-Cresol absorbs at wavelengths >290 nm(5) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). m-Cresol has been detected in rain water(6,7) indicating it may be removed from the air by wet deposition(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Catalyst; Corrosion inhibitor; Cleaning agent; Fragrance; Dye; Intermediate; Other; Solvent; Fuel; Surfactant (surface active agent); Processing aids not otherwise specified Source: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: m-Cresol Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used to make synthetic resins; Also used in disinfectants, photographic developers, explosives, fungicides, and as an industrial solvent; [Merck Index] Used in combination with 2,4-xylenol (CAS# 105-67-9) as a bactericide/bacteriostat for the control of crown gall, olive knot, and burr knot in fruit, nut, and ornamental trees and vines; [EPA REDs] Used as flavoring agent or adjuvant; [FDA] Used in ore flotation, fumigation compounds, degreasing compounds, paintbrush cleaners, lubricating oils, as a wood preservative, engine and metal cleaner, and in the textile industry; [NTP] Naturally occurring in many plants, petroleum, and, coal tar, as well as emissions from the combustion of wastes, coal, wood, vehicles, and cigarettes; Used primarily as an intermediate for synthetic vitamin E, pesticides, fragrances, antioxidants, disinfectants, and preservatives; Used as a pharmaceutical bactericide and preservative; Uses for all cresol isomers include as preservatives or stabilizers in cleaning/washing agents, surface treatment products, paints, adhesives, binding agents, corrosion inhibitors, and impregnation materials; [OECD SIDS: m-/p-Cresol Category - 2003] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Metal Degreasing [Category: Clean]; Textiles (Fiber & Fabric Manufacturing) [Category: Industry]; Painting (Solvents) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Applying Wood Preservatives [Category: Other]; Using Disinfectants or Biocides [Category: Clean]; Farming (Pesticides) [Category: Industry]; Photographic Processing [Category: Other]; Metal Extraction and Refining [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For m-cresol (USEPA/OPP Pesticide Code: 022102) ACTIVE products with label matches. /SRP: Registered for use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: m-Cresol and xylenol were registered by the Agency for use in the United States in 1980 for use as a bactericide for control of crown gall and olive knot on certain fruit and nut trees and ornamentals and the genetic/physiological disorder burr knot on apples. Currently, one product is registered which contains both m-cresol and xylenol. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For making synthetic resins; in disinfectants and fumigants; as industrial solvent; m-cresol in photographic developers, explosives. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Chemical intermediate for thymol used in cough/cold medicinals, synthetic pyrethroid insecticides, 3-methyl-6-t-butylphenol, trinitro-m-cresol for explosives, & phenolic resins (possible use); disinfectant ingredient (possible use); ore flotation agent (possible use); solvent (eg, for wire enamel). Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for m-CRESOL (11 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Cresols are used to as solvents, disinfectants and deodorizers, as well as to make other chemicals. They may be formed normally in the body from other compounds. Cresols are found in many foods and in wood and tobacco smoke, crude oil, coal tar, and in chemical mixtures used as wood preservatives. Small organisms in soil and water produce cresols when they break down materials in the environment. Breathing air containing cresols is the primary source of exposure. Exposure may also result from drinking contaminated water, eating contaminated food and coming into contact with liquids containing cresols. (L528) Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Preuves officielles sur le nom d’ingrédient de l’UE

Le nom de l’ingrédient correspond exactement au glossaire officiel 2025 de l’UE des dénominations communes d’ingrédients.

Ingrédients ayant des fonctions de formulation communes

Sources officielles et scientifiques complémentaires

11 bases de données externes pour vérifier cette identité

Comment M-CRESOL apparaît dans l’inventaire CosIng

L’inventaire CosIng répertorie M-CRESOL comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.

M-CRESOL est aussi associé à 2 fonctions cosmétiques dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.

Questions fréquentes

M-CRESOL figure dans l’inventaire des ingrédients CosIng de l’UE, sans fiche de restriction d’annexe directement associée pour le moment. L’absence de lien avec une annexe ne garantit pas une utilisation sans restriction ; vérifiez toujours auprès de la base de données officielle CosIng actuelle avant de formuler.

Selon l’inventaire CosIng de l’UE, M-CRESOL porte la ou les désignations de fonction suivantes :

Le CAS 108-39-4 peut apparaître dans plusieurs fiches d’annexe de l’UE. La page de recherche par CAS présente toutes les entrées des annexes II à VI partageant cet identifiant, ce qui est utile pour déterminer le statut réglementaire transversal aux annexes d’une même substance chimique.

Utilisez le vérificateur INCI pour analyser une liste d’ingrédients complète sur des marchés sélectionnés, ou comparez cette substance sur tous les jeux de données de marchés pris en charge.

Note de source pour M-CRESOL

Cette page reproduit l’entrée d’inventaire CosIng de M-CRESOL issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.

Utilisez cette page d’inventaire pour étudier M-CRESOL et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète pour détecter M-CRESOL et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.

Vérificateur INCI

Rechercher des ingrédients similaires

Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à M-CRESOL, à ses identifiants ou à des variantes de nom proches.

Rechercher