Aller au contenu principal
IngrédientMise à jour CosIng 15 Oct 2010

FUMARIC ACID

Fumaric acid

FUMARIC ACID figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.

En un coup d’œil

Fonction
Buffering
CAS
110-17-8
EC
203-743-0
Annexes de l’UE
Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.

Preuves réglementaires par marché

Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.

Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.

Détails d’inventaire pour FUMARIC ACID

Nom INCI

FUMARIC ACID

Nom DCI

fumaric acid

Description

Fumaric acid

Provenance de la fiche

Référence d’inventaire
33964
Identité importée
FUMARIC ACID
Mise à jour de la source
15/10/2010
Notes de source CosIng de la Commission européenne

Données clés

Restriction
—
Fonction
  • BUFFERING

    Stabilising the pH of an aqueous medium in a narrow range even if an acid or base is added. Altering and/or maintaining a cosmetic product's pH at the desired level.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 110-17-8
CAS 110-17-8PubChem CID 444972

Fumaric Acid

Fumaric acid appears as a colorless crystalline solid. The primary hazard is the threat to the environment. Immediate steps should be taken to limit spread to the environment. Combustible, though may be difficult to ignite. Used to make paints and plastics, in food processing and preservation, and for other uses. — CAMEO Chemicals

Nom IUPAC
(E)-but-2-enedioic acid
Formule moléculaire
C4H4O4
Masse moléculaire
116.07 g/mol
Masse exacte
116.01095860 Da
XLogP3
-0,3
Surface polaire topologique
74,6 Ų
Donneurs de liaisons hydrogène
2
Accepteurs de liaisons hydrogène
4
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

trans-Butenedioic acidAllomaleic acidLichenic acidBoletic acid(2E)-but-2-enedioic acidTumaric acidtrans-1,2-Ethylenedicarboxylic acid(E)-2-Butenedioic acid
16 autres noms signalés
Allomalenic acidtrans-2-Butenedioic acid(2E)-2-butenedioic acidFumaricum acidum2-Butenedioic acid, (E)-Kyselina fumarovaUSAF EK-P-583Butenedioic acid, (E)-FEMA No. 24882-Butenedioic acid (2E)-NSC-2752Allomaleic-acidBoletic-acidtrans-but-2-enedioic acidU-1149(E)-Butenedioic acid
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant444972

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for 0.4% (13 of 3331) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H319 (99.6%): Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 3331 reports by companies from 12 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 13 of 3331 reports by companies.; There are 11 notifications provided by 3318 of 3331 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P273, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: NITE-CMC
  • Health Effects: Acute exposure to fumaric acid can cause skin redness (skin contact), cough or sore throat (inhalation), abdominal cramps, nausea and diarrhea (ingestion). Chronically high levels of fumaric acid are associated with at least 3 inborn errors of metabolism including: 2-Ketoglutarate dehydrogenase complex deficiency, Fumarase deficiency and Pyruvate carboxylase deficiency. Fumarase deficiency causes encephalopathy, severe mental retardation, unusual facial features, brain malformation, and epileptic seizures. High intracellular fumaric acid levels are associated with the development of renal cancer, leiomyomata, renal cysts, and tumors. Source: Toxin and Toxin Target Database (T3DB)
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: Acute Toxicity: Fumarate is also an endogenous electrophile and reacts spontaneously with cysteine residues in proteins by a Michael addition reaction to form S-(2-succinyl) cysteine, a process termed succination. Lachrymators such as fumarate are thought to act by attacking sulfhydryl functional groups in enzymes. One of the most probable protein targets is the TRPA1 ion channel that is expressed in sensory nerves (trigeminal nerve) of the eyes, nose, mouth and lungs. Chronic Toxicity: Fumarate is increasingly being identified as an oncometabolite. Fumarase or fumarate hydratase (FH) is a tumor suppressor, whose mutation is associated with the development of leiomyomata, renal cysts, and tumors. Loss of FH enzymatic activity results in accumulation of intracellular fumarate which has been proposed to act as a competitive inhibitor of 2-oxoglutarate-dependent oxygenases including the hypoxia-inducible factor (HIF) hydroxylases, thus activating oncogenic HIF pathways. Mitochondrial dysfunction is also associated with FH deficiency. Fumarate hydratase-deficient cells and tumors have been shown to accumulate fumarate to very high levels with multiple consequences including the activat Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for fumaric acid(SRC), using a log Kow of 0.46(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 7(SRC), determined from a structure estimation method(2), indicates that fumaric acid is expected to have very high mobility in soil(SRC). The pKa values of fumaric acid are 3.03 and 4.54(3), indicating that this compound will exist almost entirely in anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of fumaric acid from moist soil surfaces is not expected to be an important fate process(SRC) given its pKa(3). Fumaric acid is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.54X10-4 mm Hg(5). Using a Warburg respirometer and a sewage inoculum, 5 day Theoretical BODs of 57-70% were reported(6), suggesting that biodegradation may be an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 7(SRC), determined from a structure estimation method(2), indicates that fumaric acid is not expected to adsorb to suspended solids and sediment(SRC). A pKa values of 3.03 and 4.54(3) indicate fumaric acid will exist almost entirely in the anion form at pH values of 5 to 9 and therefore volatilization from water surfaces is not expected to be an important fate process(4). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow of 0.46(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Fumaric acid is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(8). The rate constant for the aqueous reaction of fumaric acid with photochemically produced hydroxyl radicals (pH 4.5-10) is 6.0X10+9/M-sec(9); using a hydroxyl radical concentration of 3X10-17 M in brightly sunlit natural water(10), the half-life would be 45 days(SRC). The half-life of fumaric acid in various natural waters ranged from 1-15 days using river die-away studies, in Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), fumaric acid, which has a vapor pressure of 1.54X10-4 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase fumaric acid is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and ozone(SRC); the half-lives for these reactions in air are estimated to be 7 hours and 6 days(SRC), calculated from rate constants of 5.3X10-11 cu cm/molecule-sec(3) and 1.8X10-18 cu cm/molecule-sec(4), respectively. Particulate-phase fumaric acid may be removed from the air by wet or dry deposition(SRC). Fumaric acid does not absorb UV light above 290 nm in methanol, acidic methanol, or basic methanol solution(5) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Dispersing agent; Flavoring and nutrient; Binder; Other; Processing aids not otherwise specified; Monomers; Fixing agent (mordant); Filler; Not Known or Reasonably Ascertainable; Emulsifier; Intermediate Source: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: Fumaric Acid Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: An essential biochemical in the cellular respiration of plants and animals; [Merck Index] Used as a fortifier (paper size resins, unsaturated polyester resins, and alkyd surface coating resins), food antioxidant, dye mordant, and medication; Also used in dentifrices (stain remover) and to make other chemicals; [HSDB] Used in rosin esters and adducts, drying oils, printing inks, and foods (acidulant and flavoring agent); [Hawley] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Pulp and Paper Processing [Category: Industry]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For fumaric acid (USEPA/OPP Pesticide Code: 051201) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Fumaric acid is used primarily in liquid pharmaceutical preparations as an acidulant and flavoring agent. Fumaric acid may be included as the acid part of effervescent tablet formulations, although this use is limited as the compound has an extremely low solubility in water. It is also used as a chelating agent which exhibits synergism when used in combination with other true antioxidants. In the design of novel pelletized formulations manufactured by extrusion-spheronization, fumaric acid was used to aid spheronization, favoring the production of fine pellets. It has also been investigated as an alternative filler to lactose in pellets. Fumaric acid has been investigated as a lubricant for effervescent tablets, and copolymers of fumaric acid and sebacic acid have been investigated as bioadhesive microspheres. It has also been used in film-coated pellet formulations as an acidifying agent and also to increase drug solubility. Fumaric acid is also used as a food additive at concentrations up to 3600 ppm, and as a therapeutic agent in the treatment of psoriasis and other skin disorders. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Reported uses; Table: Reported uses (ppm): (Flavor and Extract Manufacturers' Association) [Table#2022] Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Fortifier in paper size resins, unsaturated polyester resins, and alkyd surface coating resins; miscellaneous applications; acidulant in gelatin desserts and dry beverage powders; chemical intermediate for plasticizers including dibutyl fumarate. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for Fumaric acid (9 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Use (kg; approx.) in Germany (2009): >1000; Consumption (g per capita; approx.) in Germany (2009): 0.0122; Calculated removal (%): 92.1 Source: NORMAN Suspect List Exchange
  • Uses: Fumaric acid is naturally produced by the body, however for industrial applications it is synthesized chemically. Fumaric acid is used to impart a tart taste to processed foods. It is also used as an antifungal agent in boxed foods such as cake mixes and flours, as well as tortillas. Fumaric acid is also added to bread to increase the porosity of the final baked product. It is used to impart a sour taste to sourdough and rye bread. In cake mixes, it is used to maintain a low pH and prevent clumping of the flours used in the mix. In fruit drinks, fumaric acid is used to maintain a low pH which, in turn, helps to stabilize flavor and color. Fumaric acid also prevents the growth of E. coli in beverages when used in combination with sodium benzoate. When added to wines, fumaric acid helps to prevent further fermentation and yet maintain low pH and eliminate traces of metallic elements. In this fashion, it helps to stabilize the taste of wine. Fumaric acid can also be added to dairy products, sports drinks, jams, jellies and candies. Fumaric acid helps to break down bonds between gluten proteins in wheat and helps to create a more pliable dough. Fumaric acid is used in paper sizing, pri Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Preuves officielles sur le nom d’ingrédient de l’UE

Le nom de l’ingrédient correspond exactement au glossaire officiel 2025 de l’UE des dénominations communes d’ingrédients.

Ingrédients ayant des fonctions de formulation communes

Sources officielles et scientifiques complémentaires

11 bases de données externes pour vérifier cette identité

Comment FUMARIC ACID apparaît dans l’inventaire CosIng

L’inventaire CosIng répertorie FUMARIC ACID comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.

FUMARIC ACID est aussi associé à 1 fonction cosmétique dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.

Questions fréquentes

FUMARIC ACID figure dans l’inventaire des ingrédients CosIng de l’UE, sans fiche de restriction d’annexe directement associée pour le moment. L’absence de lien avec une annexe ne garantit pas une utilisation sans restriction ; vérifiez toujours auprès de la base de données officielle CosIng actuelle avant de formuler.

Selon l’inventaire CosIng de l’UE, FUMARIC ACID porte la ou les désignations de fonction suivantes :

Le CAS 110-17-8 peut apparaître dans plusieurs fiches d’annexe de l’UE. La page de recherche par CAS présente toutes les entrées des annexes II à VI partageant cet identifiant, ce qui est utile pour déterminer le statut réglementaire transversal aux annexes d’une même substance chimique.

Utilisez le vérificateur INCI pour analyser une liste d’ingrédients complète sur des marchés sélectionnés, ou comparez cette substance sur tous les jeux de données de marchés pris en charge.

Note de source pour FUMARIC ACID

Cette page reproduit l’entrée d’inventaire CosIng de FUMARIC ACID issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.

Utilisez cette page d’inventaire pour étudier FUMARIC ACID et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète pour détecter FUMARIC ACID et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.

Vérificateur INCI

Rechercher des ingrédients similaires

Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à FUMARIC ACID, à ses identifiants ou à des variantes de nom proches.

Rechercher