Aller au contenu principal
Nom officiel d’étiquetage de l’UEEntrée 8964 du glossaire

DIMETHYL ETHER

Cette fiche confirme une dénomination commune officielle d’ingrédient pour l’étiquetage des produits cosmétiques de l’UE. Elle ne confirme pas à elle seule que la substance est autorisée, non restreinte ou sûre.

Aperçu des preuves mondiales

L’identité résolue présente des preuves réglementaires correspondantes dans 0 des 13 jeux de données de marchés indexés : 0 fiches de pays et 0 fiches d’annexes de l’UE. Chaque résultat et chaque lacune de preuves sont énumérés ci-dessous.

0 marchés avec preuves
Marchés vérifiés
13
Marchés avec preuves
0
Lacunes de preuves
13
Identifiants résolus
2

Identité résolue de la substance

CAS:115-10-6
EC:204-065-8
Fiches de l’index des ingrédients :
DIMETHYL ETHER
Fonctions cosmétiques : PROPELLANT, SOLVENT, VISCOSITY CONTROLLING

Dimethyl ether

1 nom correspondant ou signalé
DIMETHYL ETHER

Preuves réglementaires par marché

Aucun des 13 marchés suivis ici ne détient de règle importée sous le nom DIMETHYL ETHER.

Il s’agit d’un constat sur cet inventaire, et non sur le droit : l’absence de règle importée n’est pas la preuve qu’une substance est autorisée. Une règle peut exister sous un autre nom, sous un numéro CAS ou CE que cette entrée du glossaire ne comporte pas, ou dans un jeu de données pas encore importé.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 115-10-6
CAS 115-10-6PubChem CID 8254

Dimethyl Ether

Dimethyl ether is a colorless gas with a faint ethereal odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air. Any leak can be either liquid or vapor. It can asphyxiate by the displacement of air. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. — CAMEO Chemicals

Nom IUPAC
methoxymethane
Formule moléculaire
C2H6O
Masse moléculaire
46.07 g/mol
Masse exacte
46.041864811 Da
XLogP3
0,1
Surface polaire topologique
9,2 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
1
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Methyl etherDimethyl oxideOxybismethaneMethyl oxideMethane, oxybis-Wood etherDymel AEther, dimethyl
16 autres noms signalés
Ether, methylDemeon DAM13FS69BXCHEBI:28887RefChem:6420204-065-8Methane, 1,1'-oxybis-(CH3)2OCH3-O-CH3dimethylethermethyletherHSDB 354Dimethyl ether, puriss., >=99.9% (GC)EINECS 204-065-8UN1033UNII-AM13FS69BX
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8254

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: CAUTION: Exposure of skin to compressed gases may result in freezing of the skin. Treatment for frostbite may be necessary. Remove the victim from the source of contamination. IMMEDIATELY wash affected areas gently with COLD water (and soap, if necessary) while removing and isolating all contaminated clothing. Dry carefully with clean, soft towels. If symptoms such as inflammation or irritation develop, IMMEDIATELY call a physician or go to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a ho Source: CAMEO Chemicals
  • ERG2024, Guide 115 (Dimethyl ether): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H220: Extremely flammable gas [Danger Flammable gases] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P222, P280, P377, P381, and P403 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 1497) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H220 (99.7%): Extremely flammable gas [Danger Flammable gases]; H280 (51.5%): Contains gas under pressure; may explode if heated [Warning Gases under pressure] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P222, P280, P377, P381, P403, and P410+P403 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1497 reports by companies from 24 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 1497 reports by companies.; There are 23 notifications provided by 1496 of 1497 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H220: Extremely flammable gas [Danger Flammable gases]; H280: Contains gas under pressure; may explode if heated [Warning Gases under pressure]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P222, P261, P271, P280, P304+P340, P319, P377, P381, P403, P403+P233, P405, P410+P403, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Danger Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 4 - Materials that rapidly or completely vaporize at atmospheric pressure and normal ambient temperature or that are readily dispersed in air and burn readily. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: DME has very low acute inhalation toxicity. The 4-hour LC50 in rats is 164,000 ppm, and the cardiac sensitization threshold in dogs was greater than 200,000 ppm. In repeated inhalation rat studies of up to two years, DME was not carcinogenic and produced minimal toxicity at 25,000 and 10,000 ppm, and the NOAEC was 2000 ppm. DME was not teratogenic in pregnant rats up to 40,000 ppm; however, slight maternal and fetal toxicity were observed at greater than 5000 ppm. DME was not mutagenic in vitro or in vivo. The primary inhalation exposure finding was reversible CNS depression. Source: Pertti (Bert) Hakkinen's Toxicology and Other Annotations
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated for dimethyl ether(SRC), using a log Kow of 0.10(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 27(SRC), determined from a log Kow of 0.10(2) and a regression-derived equation(3), indicates that dimethyl ether is expected to have very high mobility in soil(SRC). Volatilization of dimethyl ether from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 5.9X10-3 atm-cu m/mole(SRC), derived from its vapor pressure, 4450 mm Hg(4), and water solubility, 4.6X10+4 mg/L(5). Volatilization of dimethyl ether from dry soil surfaces is expected(SRC) based upon this compound's vapor pressure(4). Biodegradation of dimethyl ether in soil is expected to be a slow process(SRC), based upon its slow biodegradation in an aqueous screening study(6). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 27(SRC), determined from a log Kow of 0.10(2) and a regression-derived equation(3), indicates that dimethyl ether is not expected to adsorb to suspended solids and sediment in the water column(SRC). Dimethyl ether is expected to volatilize from water surfaces(3) based on an estimated Henry's Law constant of 5.9X10-3 atm-cu m/mole(SRC), derived from its vapor pressure, 4450 mm Hg(4), and water solubility, 4.6X10+4 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 2.4 hours and 2.8 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3(SRC), from the log Kow(2) and a regression derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Biodegradation of dimethyl ether in water is expected to be a slow process(SRC), based upon its slow biodegradation in an aqueous screening study(8). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dimethyl ether, which has a vapor pressure of 4450 mm Hg at 25 °C(2), will exist solely as a gas in the ambient atmosphere. Gas-phase dimethyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and nitrate radicals(SRC); half-lives for these reactions in air are estimated to be 5.4 and 123 days, respectively(3,4). Direct photolysis is not expected to be an important removal process since aliphatic ethers do not absorb light in the environmental spectrum(5). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Recherche complémentaire sur la substance auprès de sources faisant autorité

Chaque lien lance une recherche de cette identité dans la source concernée. Un lien est une piste de recherche, et non l’affirmation que la source détient une fiche exacte. Ce qu’est chaque source et sa valeur juridique

Aller plus loin avec cette fiche

Analyser dans une formuleOuvrir la comparaison autonome

Source officielle et champ d’application

Importé de la décision d’exécution (UE) 2025/1175 de la Commission (version du jeu de données EU 2025/1175). Le glossaire fournit les dénominations communes des ingrédients pour la liste d’ingrédients exigée par l’article 19, paragraphe 1, point g) ; ce n’est ni une liste d’autorisation ni une liste de sécurité.

Ouvrir la décision officielle