BUTOXYDIGLYCOL
Cette fiche confirme une dénomination commune officielle d’ingrédient pour l’étiquetage des produits cosmétiques de l’UE. Elle ne confirme pas à elle seule que la substance est autorisée, non restreinte ou sûre.
Aperçu des preuves mondiales
L’identité résolue présente des preuves réglementaires correspondantes dans 7 des 13 jeux de données de marchés indexés : 6 fiches de pays et 1 fiches d’annexes de l’UE. Chaque résultat et chaque lacune de preuves sont énumérés ci-dessous.
Identité résolue de la substance
2-(2-Butoxyethoxy)ethanol; diethylene glycol monobutyl ether; DEGBE
Note de restriction de l’inventaire : III/187
7 noms correspondants ou signalés
Preuves réglementaires dans les 13 marchés
Ouvrez chaque fiche correspondante pour connaître son champ d’application, sa concentration, ses conditions, ses avertissements et la version de la source officielle.
Balayez ou faites défiler horizontalement pour voir la couverture des jeux de données et les actions suivantes.
| Marché | Résultat | Fiches | Jeu de données | Signification / action suivante |
|---|---|---|---|---|
| European Union EU | Soumise à restrictions | 1Ouvrir la fiche 1 | Complete annex dataset Regulation (EC) 1223/2009 consolidated to 1 May 2026 | Examinez chaque fiche associée et ses conditions exactes. |
| Great Britain GB | Restricted | 1Ouvrir la fiche 1 | Complete consolidated annex dataset GB retained Regulation 1223/2009 schedules, effective 15 August 2026 | Examinez chaque fiche associée et ses conditions exactes. |
| Canada CA | Aucune correspondance trouvée | 0 | Complete Hotlist snapshot Health Canada Cosmetic Ingredient Hotlist, 13 August 2025 | The Hotlist is an administrative compliance tool, not an exhaustive safety approval list. |
| New Zealand NZ | Restricted | 1Ouvrir la fiche 1 | Complete schedules dataset Cosmetic Products Group Standard schedules effective 1 January 2026 | Examinez chaque fiche associée et ses conditions exactes. |
| ASEAN ASEAN | Restricted | 1Ouvrir la fiche 1 | Complete regional annex dataset ASEAN Cosmetic Directive annexes 2026-1, 22 June 2026 | Examinez chaque fiche associée et ses conditions exactes. |
| China CN | Aucune correspondance trouvée | 0 | Complete prohibited catalogues plus official-source workflow NMPA 2021 banned catalogues plus dynamic IECIC List I/List II system current since 2025 | IECIC listing is not blanket approval; absence may require the new cosmetic ingredient route, and restrictions are checked separately. |
| Japan JP | Aucune correspondance trouvée | 0 | Complete Standards appendices dataset MHLW Standards for Cosmetics official English source and Japanese amendments checked for the imported snapshot | The Japanese text and subsequent notices are canonical; no local match is not a product-compliance conclusion. |
| South Korea KR | Prohibited | 1Ouvrir la fiche 1 | Complete current appendix dataset MFDS Notice 2026-19, effective 18 March 2026 | Examinez chaque fiche associée et ses conditions exactes. |
| United States US | Aucune correspondance trouvée | 0 | Complete enumerated federal ingredient rules eCFR Title 21 issue date 27 August 2026 | FDA has no general approved-cosmetic-ingredient catalogue; absence from these sections is not approval or proof of safety. |
| Australia AU | Aucune correspondance trouvée | 0 | Complete cosmetic-relevant Poisons Standard subset plus official workflow Therapeutic Goods (Poisons Standard—June 2026) Instrument 2026 | An AICIS Inventory match is not cosmetic approval; no Inventory match can indicate a new, exempted, reported or confidential introduction. |
| Brazil BR | Aucune correspondance trouvée | 0 | Complete prohibited dataset plus current restricted-list workflow ANVISA RDC 1.029/2026 and RDC 1.030/2026, published 15 June 2026 | RDC 1.030/2026 amends rather than replaces the prohibited baseline, and the second restricted-list revision was still under consultation in July 2026. |
| India IN | Restricted | 1Ouvrir la fiche 1 | Complete current Part 2 dataset plus official workflow for Parts 1, 3 and 4 Cosmetics Rules 2020 plus current BIS IS 4707 parts (1:2020, 2:2025, 3:2025, 4:2022) | Examinez chaque fiche associée et ses conditions exactes. |
| Saudi Arabia SA | Restricted | 1Ouvrir la fiche 1 | Complete official list index SFDA live prohibited/restricted lists, snapshot 30 August 2026 | Examinez chaque fiche associée et ses conditions exactes. |
Fiches de marché correspondantes et conditions
Great Britain
GB retained Regulation 1223/2009 schedules, effective 15 August 2026New Zealand
Cosmetic Products Group Standard schedules effective 1 January 2026ASEAN
ASEAN Cosmetic Directive annexes 2026-1, 22 June 2026South Korea
MFDS Notice 2026-19, effective 18 March 2026India
Cosmetics Rules 2020 plus current BIS IS 4707 parts (1:2020, 2:2025, 3:2025, 4:2022)Saudi Arabia
SFDA live prohibited/restricted lists, snapshot 30 August 2026Preuves exactes des annexes II à VI
BUTOXYDIGLYCOL
Champ d’application du produit : Solvent in hair dye products
Concentration maximale : 9%
Restrictions : No use in aerosol dispensers (sprays)
Identité et propriétés chimiques

Diethylene Glycol Monobutyl Ether
Ethanol, 2-(2-butoxyethoxy)- is an ether. — ChEBI
- Nom IUPAC
- 2-(2-butoxyethoxy)ethanol
- Formule moléculaire
- C8H18O3
- Masse moléculaire
- 162.23 g/mol
- Masse exacte
- 162.125594432 Da
- XLogP3
- 0,6
- Surface polaire topologique
- 38,7 Ų
- Donneurs de liaisons hydrogène
- 1
- Accepteurs de liaisons hydrogène
- 3
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:195270
- ChEMBL:CHEMBL1904721
- EPA DTXSID:DTXSID8021519
- PubMed:22931403
- PubMed:20976153
- PubMed:17854990
- PubMed:17693786
- PubMed:16433236
- PubMed:15705492
- PubMed:15059798
- PubMed:14996047
- PubMed:12943003
- PubMed:11962702
- PubMed:11485228
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 442 °F (USCG, 1999) Source: CAMEO Chemicals
- Autoignition Temperature: 400 degF (204 °C) Source: Hazardous Substances Data Bank (HSDB)
- Autoignition Temperature: 223 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 448 °F at 760 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: 230.4 °C Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 230 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 448 °F Source: Occupational Safety and Health Administration (OSHA)
- Boiling Point: 230.6 °C @760 [mm Hg] Source: PAC Chemical Database, U.S. Department of Energy
- Color/Form: Colorless liquid Source: Hazardous Substances Data Bank (HSDB)
- Color/Form: Clear liquid Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.954 at 68 °F (USCG, 1999) - Less dense than water; will float Source: CAMEO Chemicals
- Density: 0.9553 g/cu cm at 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: Density: 0.952 at 20 °C; 0.948 at 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 0.95 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 0.954 at 68 °F Source: Occupational Safety and Health Administration (OSHA)
- Density: 0.9553 @ 20°C Source: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 172 °F (NTP, 1992) Source: CAMEO Chemicals
- Flash Point: 78 °C Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 99 °C (Closed cup) Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: 172 °F (78 °C) (Closed cup) Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: 78 °C c.c. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Flash Point: 176 °F Source: Occupational Safety and Health Administration (OSHA)
- LogP: log Kow = 0.56 Source: Hazardous Substances Data Bank (HSDB)
- LogP: 0.3 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -90.6 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: -68.1 °C Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: -68 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -90.6 °F Source: Occupational Safety and Health Administration (OSHA)
- Melting Point: -68.1 °C Source: PAC Chemical Database, U.S. Department of Energy
- Odor: Faint butyl odor Source: Hazardous Substances Data Bank (HSDB)
- Odor: Mild ether odor Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: Diethylene glycol monobutyl ether is a colorless liquid with a mild pleasant odor. Mixes with water. (USCG, 1999) Source: CAMEO Chemicals
- Physical Description: Liquid; Other Solid; Gas Vapor; Liquid; Liquid; Other Solid; CBI Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless liquid with a mild pleasant odor; [CAMEO] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS LIQUID. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: Colorless liquid Source: Occupational Safety and Health Administration (OSHA)
- Refractive Index: Index of refraction: 1.4258 at 27 °C/D Source: Hazardous Substances Data Bank (HSDB)
- Solubility: greater than or equal to 100 mg/mL at 68 °F (NTP, 1992) Source: CAMEO Chemicals
- Solubility: Miscible with water at 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible with oils Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Very soluble in ethanol, ethyl ether, acetone; soluble in benzene Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: very good Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.01 mmHg at 68 °F (NTP, 1992) Source: CAMEO Chemicals
- Vapor Pressure: 0.02 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: VP: 0.06 mm Hg at 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: 2.19X10-2 mm Hg at 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: Vapor pressure, Pa at 20 °C: 3 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.01 mmHg at 68 °F Source: Occupational Safety and Health Administration (OSHA)
- Vapor Pressure: 0.022 [mm Hg] @25 °C Source: PAC Chemical Database, U.S. Department of Energy
- Viscosity: 0.0649 cP at 20 °C Source: Hazardous Substances Data Bank (HSDB)
- pH: Neutral Source: Hazardous Substances Data Bank (HSDB)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
- Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Note: This chemical does not meet GHS hazard criteria for < 0.1% (2 of 4089) of reports. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H319 (> 99.9%): Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 4089 reports by companies from 12 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 2 of 4089 reports by companies.; There are 11 notifications provided by 4087 of 4089 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Danger Source: NITE-CMC
- GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
- Precautionary Statement Codes: P210, P260, P261, P264, P264+P265, P270, P271, P280, P304+P340, P305+P351+P338, P319, P337+P317, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Signal: Warning Source: NITE-CMC
- NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
- Toxicity Summary: IDENTIFICATION AND USE: Diethylene glycol mono-n-butyl ether (DGBE) is a colorless liquid with a faint butyl odor. It is used as an inert ingredient that is not registered for current use as a pesticide in the U.S., but is used in pesticide products. It is also used as a coalescing agent in latex paints; solvent for stamp pad inks; dye solvent; solvent in high baked enamels; dispersant; diluent for hydraulic brake fluids; and a mutual solvent for soap, oil, and water in household cleaners. HUMAN EXPOSURE AND TOXICITY: The ethers of diethylene glycol are lower in toxicity than the ethers of ethylene glycol, but they have many similar characteristics. Exposure to some ether derivatives of ethylene and diethylene glycols can cause central nervous depression, no hypocalcemic tetany or metabolic acidosis, nausea, vomiting, & sometimes diarrhea, headache, later abdominal and lumbar pain, costovertebral angle tenderness, transient polyuria & then oliguria, progressing to anuria, acute renal failure, and pathological lesions may appear in brain, lung, liver, meninges & heart. ANIMAL STUDIES: Observations in animals suggest a possibility of pulmonary edema, intravascular hemolysis and bone Source: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol mono-n-butyl ether(SRC), using a log Kow of 0.56(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that diethylene glycol mono-n-butyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol mono-n-butyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given a Henry's Law constant of 7.2X10-9 atm-cu m/mole(3). Diethylene glycol mono-n-butyl ether is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.0219 mm Hg at 25 °C(4). Biodegradation of ethylene glycol mono-n-butyl ether ranges from 2% using 5 day BOD(5) to 100% in 6 days using a modified Zahns-Wellens test(6), suggesting that biodegradation may be an important fate process in aerobic soil under certain conditions(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that diethylene glycol mono-n-butyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon a Henry's Law constant of 7.2X10-9 atm-cu m/mole(4). Diethylene glycol mono-n-butyl ether is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow of 0.56(6) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Aqueous aerobic screening tests gave biodegradation rates ranging from 2% in 5 day BOD(7) to 100% in 6 days using a modified Zahns-Wellens test(8), suggesting that biodegradation may be an important environmental fate process in water under certain condtions(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol mono-n-butyl ether, which has a vapor pressure of 0.0219 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol mono-n-butyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 5.2 hours(SRC), calculated from its rate constant of 7.44X10-11 cu cm/molecule-sec at 23 °C(3). Alcohols and ethers do not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, diethylene glycol mono-n-butyl ether is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Cleaning agent; Hydraulic fluids; Corrosion inhibitor; Thickening agent; Not Known or Reasonably Ascertainable; Viscosity modifiers; Film former; Intermediate; Etching agent; Humectant; Softener and conditioner; Solvent; Lubricating agent; Other Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Plating agent; Processing aids not otherwise specified; Monomers; Lubricating agent; Solvent; Defoamer; Surface modifier; Softener and conditioner; Humectant; Laboratory chemicals; Drier; Etching agent; Chelating agent; Intermediate; Processing aids, specific to petroleum production; Film former; Anti-stain agent; Emulsifier; Viscosity modifiers; Waterproofing agent; Corrosion inhibitor; Not Known or Reasonably Ascertainable; Cleaning agent Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as a solvent and diluent for polymers, resins, coatings, inks, cleaners, and metalworking fluids; [HSDB] Used as a solvent (nitrocellulose, oils, dyes, gums, soaps, and polymers) and coalescing agent in latex paints; In paints containing 1.5% w/w, painters exposed to 4-5 mg/m3; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Metal Machining [Category: Heat or Machine]; Semiconductor Manufacturing [Category: Industry]; Painting (Solvents) [Category: Paint]; Plastic Composites Manufacturing [Category: Industry]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Silk-Screen Printing [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: For diethylene glycol monobutyl ether (USEPA/OPP Pesticide Code: 011502) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
- Uses: Inert ingredient in pesticide products. Diethylene glycol monobutyl ether is found on List 2: potentially toxic other ingredients/high priority for testing inerts. ... List 2 inert ingredients are structurally similar to chemicals known to be toxic; some have data suggesting a concern. Source: Hazardous Substances Data Bank (HSDB)
- Uses: CHEM INT FOR DIETHYLENE GLYCOL MONOBUTYL ETHER ACETATE; COALESCING AGENT IN LATEX PAINTS; SOLVENT FOR STAMP PAD INKS; DYE SOLVENT; SOLVENT IN HIGH BAKED ENAMELS; DISPERSANT FOR VINYL CHLORIDE RESINS IN ORGANOSOLS; DILUENT FOR HYDRAULIC BRAKE FLUIDS; MUTUAL SOLVENT FOR SOAP, OIL, WATER IN HOUSEHOLD CLEANERS Source: Hazardous Substances Data Bank (HSDB)
- Uses: In textile industry as wetting-out soln Source: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for DIETHYLENE GLYCOL MONO-N-BUTYL ETHER (10 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Recherche complémentaire sur la substance auprès de sources faisant autorité
Chaque lien lance une recherche de cette identité dans la source concernée. Un lien est une piste de recherche, et non l’affirmation que la source détient une fiche exacte. Ce qu’est chaque source et sa valeur juridique
Aller plus loin avec cette fiche
Source officielle et champ d’application
Importé de la décision d’exécution (UE) 2025/1175 de la Commission (version du jeu de données EU 2025/1175). Le glossaire fournit les dénominations communes des ingrédients pour la liste d’ingrédients exigée par l’article 19, paragraphe 1, point g) ; ce n’est ni une liste d’autorisation ni une liste de sécurité.
Ouvrir la décision officielle