CAS 122-60-1
Le CAS 122-60-1 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.
Fiches pour le CAS 122-60-1
1 au totalIdentité et propriétés chimiques

Phenyl glycidyl ether
Phenyl glycidyl ether is a colorless liquid. (NTP, 1992) — CAMEO Chemicals
- Nom IUPAC
- 2-(phenoxymethyl)oxirane
- Formule moléculaire
- C9H10O2
- Masse moléculaire
- 150.17 g/mol
- Masse exacte
- 150.068079557 Da
- XLogP3
- 1,6
- Surface polaire topologique
- 21,8 Ų
- Donneurs de liaisons hydrogène
- 0
- Accepteurs de liaisons hydrogène
- 2
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:82367
- ChEMBL:CHEMBL1568222
- EPA DTXSID:DTXSID8021145
- PubMed:22346986
- PubMed:22290177
- PubMed:22196513
- PubMed:22012271
- PubMed:21765830
- PubMed:21751775
- PubMed:21731544
- PubMed:21567703
- PubMed:21370839
- PubMed:21361271
- PubMed:21054058
- PubMed:20471590
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 473 °F at 760 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: 245 °C Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 245 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 473 °F Source: Occupational Safety and Health Administration (OSHA)
- Boiling Point: 473 °F Source: The National Institute for Occupational Safety and Health (NIOSH)
- Color/Form: Colorless liquid (Note: A solid below 38 degrees F) Source: Hazardous Substances Data Bank (HSDB)
- Density: 1.1092 at 68 °F (NTP, 1992) - Denser than water; will sink Source: CAMEO Chemicals
- Density: 1.1109 at 21 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 1.11 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 1.11 Source: Occupational Safety and Health Administration (OSHA)
- Density: 1.11 Source: The National Institute for Occupational Safety and Health (NIOSH)
- Flash Point: greater than 200 °F (NTP, 1992) Source: CAMEO Chemicals
- Flash Point: 248 °F Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 248 °F (Closed Cup) Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: 114 °C c.c. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Flash Point: 248 °F Source: Occupational Safety and Health Administration (OSHA)
- Flash Point: 248 °F Source: The National Institute for Occupational Safety and Health (NIOSH)
- LogP: 1.12 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 38.3 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: 3.5 °C Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: 3.5 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 38 °F Source: Occupational Safety and Health Administration (OSHA)
- Melting Point: 38 °F Source: The National Institute for Occupational Safety and Health (NIOSH)
- Physical Description: Phenyl glycidyl ether is a colorless liquid. (NTP, 1992) Source: CAMEO Chemicals
- Physical Description: Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless liquid. [Note: A solid below 38 degrees F.] [NIOSH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: Colorless liquid. Source: Occupational Safety and Health Administration (OSHA)
- Physical Description: Colorless liquid. [Note: A solid below 38 °F.] Source: The National Institute for Occupational Safety and Health (NIOSH)
- Refractive Index: Index of refraction = 1.5307 at 21 °C Source: Hazardous Substances Data Bank (HSDB)
- Solubility: 1 to 5 mg/mL at 64 °F (NTP, 1992) Source: CAMEO Chemicals
- Solubility: 12.9% in octane; completely sol in acetone and toluene Source: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, 2,400 mg/L at 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water, g/100ml at 20 °C: 0.24 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: 0.2% Source: The National Institute for Occupational Safety and Health (NIOSH)
- Vapor Pressure: 0.01 mmHg at 68 °F (NTP, 1992) Source: CAMEO Chemicals
- Vapor Pressure: 0.01 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 1.0X10-2 mm Hg at 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: Vapor pressure, Pa at 20 °C: 1.33 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.01 mmHg Source: Occupational Safety and Health Administration (OSHA)
- Vapor Pressure: 0.01 mmHg Source: The National Institute for Occupational Safety and Health (NIOSH)
- IARC Carcinogenic Agent: Phenyl glycidyl ether Source: International Agency for Research on Cancer (IARC)
- IARC Carcinogenic Classes: Group 2B: Possibly carcinogenic to humans Source: International Agency for Research on Cancer (IARC)
- IARC Monographs: Volume 47: (1989) Some Organic Solvents, Resin Monomers and Related Compounds, Pigments and Occupational Exposures in Paint Manufacture and Painting; Volume 71: (1999) Re-evaluation of Some Organic Chemicals, Hydrazine and Hydrogen Peroxide (Part 1, Part 2, Part 3) Source: International Agency for Research on Cancer (IARC)
- Publication Year: 1999 Source: International Agency for Research on Cancer (IARC)
- Evaluation Year: 1998 Source: International Agency for Research on Cancer (IARC)
- Exposure Routes: The substance can be absorbed into the body by inhalation of its aerosol and through the skin. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Exposure Routes: inhalation, skin absorption, ingestion, skin and/or eye contact Source: The National Institute for Occupational Safety and Health (NIOSH)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
- First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash promptly - If this chemical contacts the skin, promptly wash the contaminated skin with soap and water. If this chemical penetrates the clothing, promptly remove the clothing and wash the skin with soap and water. Get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
- Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H350: May cause cancer [Danger Carcinogenicity]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P261, P264, P271, P272, P273, P280, P302+P352, P304+P340, P317, P318, P319, P321, P332+P317, P333+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H312+H332 (15.6%): Harmful in contact with skin or if inhaled [Warning Acute toxicity, dermal; acute toxicity, inhalation]; H312 (24.6%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (18.7%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (99.8%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (100%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H341 (100%): Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H350 (100%): May cause cancer [Danger Carcinogenicity]; H412 (98.4%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P261, P264, P264+P265, P271, P272, P273, P280, P302+P352, P304+P340, P305+P351+P338, P317, P318, P319, P321, P332+P317, P333+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 627 reports by companies from 27 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Danger Source: NITE-CMC
- GHS Hazard Statements: H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard] Source: NITE-CMC
- Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P271, P272, P273, P280, P302+P352, P304+P340, P305+P351+P338, P308+P316, P317, P318, P319, P321, P332+P317, P333+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- GHS Hazard Statements: H303: May be harmful if swallowed [Warning Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
- Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P271, P272, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P317, P318, P319, P321, P332+P317, P333+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Target Organs: Eyes, skin, central nervous system, hematopoietic system, reproductive system Source: The National Institute for Occupational Safety and Health (NIOSH)
- Environmental Bioconcentration: An estimated BCF of 8 was calculated for phenyl glycidyl ether(SRC), using a water solubility of 2,400 mg/L(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 60(SRC), determined from a water solubility of 2,400 mg/L(2) and a regression-derived equation(3), indicates that phenyl glycidyl ether is expected to have high mobility in soil(SRC). Volatilization of phenyl glycidyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 8.2X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 1.0X10-2 mm Hg(2), and water solubility(2). Phenyl glycidyl ether is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(2). A theoretical BOD range from 0 to 6% after 5 days using activated sludge(4,5) indicates that biodegradation may not be an important fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 60(SRC), determined from a water solubility of 2,400 mg/L(2) and a regression-derived equation(3), indicates that phenyl glycidyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 8.2X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 1.0X10-2 mm Hg(2), and water solubility(2). Epoxides in general hydrolyze rapidly at 25 °C and pH 7(4) through neutral, acid, or base-mediated reactions(5). Hydrolysis products are usually the corresponding diol and sometimes re-arranged products(5). According to a classification scheme(6), an estimated BCF of 8(SRC), from its water solubility(2) and a regression-derived equation(3), suggests the potential for bioconcentration in aquatic organisms is low(SRC). A theoretical BOD range from 0 to 6% after 5 days using activated sludge(7,8) indicates that biodegradation may not be an important fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), phenyl glycidyl ether, which has a vapor pressure of 1.0X10-2 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase phenyl glycidyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 13 hrs(SRC), calculated from its rate constant of 2.9X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Phenyl glycidyl ether does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight(4). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Not Known or Reasonably Ascertainable Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Viscosity modifiers Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Glycidyl ethers are used as reactive diluents in epoxy resins. [LaDou, p. 550] Allergic contact dermatitis in shoemakers; [Marks] As a reactive diluent in uncured epoxy resins, it reduces viscosity in casting , adhesive and laminating applications; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Plastic Composites Manufacturing [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: As an acid acceptor it is very effective as a stabilizer of halogenated compounds. Its high solvency for halogenated materials offers many possibilities as an intermediate. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Plasticizer for epoxy resins Source: Hazardous Substances Data Bank (HSDB)
- Uses: Monomer for photoreactive polymers /from table/ Source: Hazardous Substances Data Bank (HSDB)
- Uses: PGE is used as a reactive diluent in uncured epoxy resins to reduce the viscosity of the uncured system for ease in casting, adhesives and laminating applications. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Component of epoxy resins Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Comment le CAS 122-60-1 est utilisé sur ce site
Le CAS 122-60-1 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.
Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 122-60-1 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.
Questions fréquentes
Outils et étapes suivantes
Vérifiez votre formule
Analysez une liste INCI complète, puis utilisez le CAS 122-60-1 pour recouper les documents fournisseurs relatifs aux substances identifiées.
Vérificateur INCIParcourir les annexes
Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.
Toutes les annexesRechercher par nom
Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 122-60-1 dans votre documentation.
Rechercher