CAS 117-82-8
Le CAS 117-82-8 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.
Fiches pour le CAS 117-82-8
1 au totalIdentité et propriétés chimiques

Dimethoxyethyl phthalate
bis(2-methoxyethyl) phthalate has been reported in Lonicera japonica with data available. — LOTUS - the natural products occurrence database
- Nom IUPAC
- bis(2-methoxyethyl) benzene-1,2-dicarboxylate
- Formule moléculaire
- C14H18O6
- Masse moléculaire
- 282.29 g/mol
- Masse exacte
- 282.11033829 Da
- XLogP3
- 1,4
- Surface polaire topologique
- 71,1 Ų
- Donneurs de liaisons hydrogène
- 0
- Accepteurs de liaisons hydrogène
- 6
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEMBL:CHEMBL1302251
- EPA DTXSID:DTXSID8025094
- PubMed:34214916
- PubMed:24503621
- PubMed:20684992
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 750 °F (399 °C) Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 340 °C Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: BP: 230 deg at 10 mm Hg Source: Hazardous Substances Data Bank (HSDB)
- Color/Form: Oily liquid Source: Hazardous Substances Data Bank (HSDB)
- Color/Form: PRACTICALLY COLORLESS, OILY LIQ Source: Hazardous Substances Data Bank (HSDB)
- Density: 1.1596 g/cu cm at 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: 410 °F (210 °C) (Open cup) Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: Freezing point: -45 °C Source: Hazardous Substances Data Bank (HSDB)
- Odor: VERY SLIGHT Source: Hazardous Substances Data Bank (HSDB)
- Odor: Mild odor Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: Nearly colorless liquid; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Refractive Index: Index of Refraction = 1.502 at 20 °C/D Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Phthalate esters are soluble to various extents in many common organic solvents and oils, but have a relatively low solubility in water. /Phthalate esters/ Source: Hazardous Substances Data Bank (HSDB)
- Solubility: SLIGHTLY SOL IN WATER (0.8%) @ 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Solubility: MISCIBLE WITH ABSOLUTE ALC Source: Hazardous Substances Data Bank (HSDB)
- Solubility: INSOL IN MINERAL OILS Source: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, 8500 mg/L, temperature not specified Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: 0.000228 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: VP: 0.01 MM HG AT 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: Vapor pressures for phthalate esters are extremely low, contributing much to their thermal stability in plastics. /Phthalate esters/ Source: Hazardous Substances Data Bank (HSDB)
- Viscosity: 32 cP Source: Hazardous Substances Data Bank (HSDB)
- Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H360Df: May damage the unborn child; Suspected of damaging fertility [Danger Reproductive toxicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H360 (100%): May damage fertility or the unborn child [Danger Reproductive toxicity] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 231 reports by companies from 5 notifications to the ECHA C&L Inventory.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Danger Source: NITE-CMC
- GHS Hazard Statements: H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
- Precautionary Statement Codes: P203, P260, P264, P270, P280, P308+P316, P318, P319, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Signal: Danger Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- GHS Hazard Statements: H360Df: May damage the unborn child; Suspected of damaging fertility [Danger Reproductive toxicity] Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: An estimated BCF of 1.4 was calculated in fish for bis(2-methoxyethyl) phthalate(SRC), using an estimated log Kow of 1.11(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 38(SRC), determined from a water solubility of 8500 mg/L(2) and a regression-derived equation(3), indicates that bis(2-methoxyethyl) phthalate is expected to have very high mobility in soil(SRC). Volatilization of bis(2-methoxyethyl) phthalate from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.8X10-13 atm-cu m/mole(SRC), using a fragment constant estimation method(4). Bis(2-methoxyethyl) phthalate is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 2.3X10-4 mm Hg(SRC), determined from a fragment constant method(5). Bis(2-methoxyethyl) phthalate was biodegraded 19.3% using an enzyme extracted from N. erythropolis(6), suggesting that bis(2-methoxyethyl) phthalate is susceptible to biodegradation(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 38(SRC), determined from a water solubility of 8500 mg/L(2}and a regression-derived equation(3), indicates that bis(2-methoxyethyl) phthalate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 2.8X10-13 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(5), an estimated BCF of 1.4(SRC), from an estimated log Kow(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Hydrolysis is not expected to be an important process(SRC) based on estimated hydrolysis half-lives of 1.3 years and 49 days at pHs 7 and 8, respectively(8). Bis(2-methoxyethyl) phthalate was biodegraded 19.3% using an enzyme extracted from Nocardia erythropolis(9), suggesting that bis(2-methoxyethyl) phthalate may be susceptible to biodegradation(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), bis(2-methoxyethyl) phthalate, which has an estimated vapor pressure of 2.3X10-4 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase bis(2-methoxyethyl) phthalate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 20 hours(SRC), calculated from its rate constant of 1.9X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Bis(2-methoxyethyl) phthalate does contain chromophores that absorb at wavelengths >290 nm(4) and therefore may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Sources/Uses: Used as a plasticizer (especially for cellulose acetate), a solvent, and in molding compositions, adhesives, laminating cements, and flash bulb lacquers; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Working with Glues and Adhesives [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: ... Plasticizer for cellulosic resins and some vinyl ester resins. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Plasticizer, especially for cellulose acetate; solvent Source: Hazardous Substances Data Bank (HSDB)
- Uses: Molding compositions, adhesives, laminating cements, and flash bulb lacquers Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Comment le CAS 117-82-8 est utilisé sur ce site
Le CAS 117-82-8 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.
Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 117-82-8 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.
Questions fréquentes
Outils et étapes suivantes
Vérifiez votre formule
Analysez une liste INCI complète, puis utilisez le CAS 117-82-8 pour recouper les documents fournisseurs relatifs aux substances identifiées.
Vérificateur INCIParcourir les annexes
Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.
Toutes les annexesRechercher par nom
Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 117-82-8 dans votre documentation.
Rechercher