Aller au contenu principal
CAS 1 fiche

CAS 111-77-3

Le CAS 111-77-3 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 111-77-3

1 au total

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 111-77-3
CAS 111-77-3PubChem CID 8134

Diethylene Glycol Monomethyl Ether

2-(2-methoxyethoxy)ethanol is a hydroxypolyether that is the monomethyl ether derivative of diethylene glycol. It has a role as a solvent and a teratogenic agent. It is a glycol ether, a diether and a hydroxypolyether. It is functionally related to a diethylene glycol. — ChEBI

Nom IUPAC
2-(2-methoxyethoxy)ethanol
Formule moléculaire
C5H12O3
Masse moléculaire
120.15 g/mol
Masse exacte
120.078644241 Da
XLogP3
-0,9
Surface polaire topologique
38,7 Ų
Donneurs de liaisons hydrogène
1
Accepteurs de liaisons hydrogène
3
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Methyl carbitolMethoxydiglycolMethyl digolDowanol DMDiethylene glycol methyl etherMECB3,6-Dioxa-1-heptanolEthanol, 2-(2-methoxyethoxy)-
16 autres noms signalés
Methyl dioxitolEktasolve DMDiglycol monomethyl etherDEGMEMethyl karbitolJeffersol DMDiethyleneglycol monomethyl etherDowanol 16Ethylene diglycol monomethyl etherEthanol, 2,2'-oxybis-, monomethyl etherbeta-Methoxy-beta'-hydroxydiethyl ether465DDJ8G8KNSC-2261CHEBI:448362-MEE cpdRefChem:133503
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8134

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H360D: May damage the unborn child [Danger Reproductive toxicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H312 (11%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H319 (11%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H361 (93.6%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P264+P265, P280, P302+P352, P305+P351+P338, P317, P318, P321, P337+P317, P362+P364, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 4012 reports by companies from 28 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P261, P271, P280, P304+P340, P318, P319, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P271, P280, P304+P340, P318, P319, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol monomethyl ether(SRC), using an estimated log Kow of -1.18 and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol monomethyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol monomethyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.6X10-11 atm-cu m/mole(SRC), using a fragment constant estimation method(2). Diethylene glycol monomethyl ether is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.25 mm Hg at 25 °C(3). Aqueous screening test data suggest that biodegradation may be an important removal mechanism of diethylene glycol monomethyl ether in soil: theoretical BOD losses of 0, 21 and 66% when incubated at 20 °C for 5, 10 and 20 days, respectively, were reported(4). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol monomethyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 1.6X10-11 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). Diethylene glycol monomethyl ether is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). According to a classification scheme(4), an estimated BCF of 3(SRC), from an estimated log Kow of -1.18(2) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Aqueous screening test data suggest that biodegradation may be an important removal mechanism of diethylene glycol monomethyl ether: theoretical BOD losses of 0, 21 and 66% when incubated at 20 °C for 5, 10 and 20 days, respectively, were reported(5). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol monomethyl ether, which has a vapor pressure of 0.25 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol monomethyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 13 hours(SRC), calculated from its rate constant of 2.6X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Alcohols and ethers do not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, diethylene glycol monomethyl ether is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Fuel agents; Solvent; Lubricating agent; Intermediate; Hydraulic fluids; Cleaning agent; Not Known or Reasonably Ascertainable Source: EPA Chemical Data Reporting (CDR)
  • Sources/Uses: Used as a solvent for wood stains, lacquers, inks, textile dye pastes, paints, waxes, dyes, and nitrocellulose resins; Also used in brake fluid, aviation fuel anti-icing additive, and inert ingredient in pesticides; [HSDB] Used as an intermediate; [Hawley] Not produced commercially in the EU; [Glycol Ethers Online] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Painting (Solvents) [Category: Paint]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For diethylene glycol monomethyl ether (USEPA/OPP Pesticide Code: 042204) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: ... Inert (or occasionally active) ingredients in pesticide formulations applied to growing crops only. Use: Deactivator for formulations used before crop emerges from soil, stabilizer. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: This additive is for use in liquid hydrocarbon fuels including jet fuel, diesel fuels, marine fuels, and fuel oils for anti-microbial control of fungi and bacteria found in hydrocarbon fuel systems and/or for anti-icing control. /Phillips Fuel Additive 56 MB/ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: De-icing additive for jet fuel. Solvent for paints, coatings and inks. Deactivator and stabilizer for pesticides. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for DIETHYLENE GLYCOL MONOMETHYL ETHER (10 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 111-77-3 est utilisé sur ce site

Le CAS 111-77-3 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 111-77-3 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.

Questions fréquentes

Une substance identifiée par le CAS 111-77-3 peut figurer dans plusieurs annexes du règlement de l’UE sur les cosmétiques lorsqu’elle est soumise à des conditions différentes selon les contextes. Par exemple, une substance peut être soumise à restrictions à l’annexe III avec des conditions précises, et le même CAS peut aussi figurer à l’annexe IV comme colorant autorisé, dans une entrée distincte avec ses propres conditions. Chaque entrée doit être examinée individuellement.

Recoupez le numéro CAS avec les fiches de spécification de vos matières premières et vos certificats d’analyse. Lorsqu’un CAS figure à l’annexe II, vérifiez son absence. Lorsqu’il figure à l’annexe III, vérifiez que les limites de concentration et les conditions de type de produit sont respectées dans votre formulation. Toutes les entrées d’annexe partageant ce numéro CAS sont énumérées ci-dessus.

Un numéro CAS est attribué par le Chemical Abstracts Service (États-Unis) et reconnu dans le monde entier. Un numéro CE est un identifiant de la Commission européenne issu d’inventaires tels que l’EINECS, l’ELINCS ou la liste NLP. Les deux identifiants peuvent figurer dans les entrées des annexes cosmétiques de l’UE. Certaines substances ont les deux, d’autres un seul, et certaines entrées plus anciennes peuvent n’en avoir aucun.

Le vérificateur INCI accepte les noms d’ingrédients, les numéros CAS et les numéros CE. Vérifiez directement ce numéro CAS, puis contrôlez le résultat auprès des fiches de spécification des fournisseurs et de toutes les conditions d’annexe associées.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète, puis utilisez le CAS 111-77-3 pour recouper les documents fournisseurs relatifs aux substances identifiées.

Vérificateur INCI

Parcourir les annexes

Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.

Toutes les annexes

Rechercher par nom

Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 111-77-3 dans votre documentation.

Rechercher