Aller au contenu principal
CAS 0 fiche

CAS 108-65-6

Le CAS 108-65-6 correspond à 0 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 108-65-6

0 au total
Aucune fiche trouvée pour ce numéro CAS.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 108-65-6
CAS 108-65-6PubChem CID 7946

Propylene glycol methyl ether acetate

Propylene glycol methyl ether acetate is a colorless liquid with a sweet ether-like odor. (USCG, 1999) — CAMEO Chemicals

Nom IUPAC
1-methoxypropan-2-yl acetate
Formule moléculaire
C6H12O3
Masse moléculaire
132.16 g/mol
Masse exacte
132.078644241 Da
XLogP3
0,4
Surface polaire topologique
35,5 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
3
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

PGMEA cpdRefChem:4334931-Methoxy-2-propyl acetatePropylene glycol monomethyl ether acetate2-Acetoxy-1-methoxypropane1-Methoxy-2-acetoxypropaneMETHOXYISOPROPYL ACETATE2-Methoxy-1-methylethyl acetate
16 autres noms signalés
2-Propanol, 1-methoxy-, acetate1-METHOXY-2-PROPANOL ACETATEPropyleneglycol monomethyl ether acetateNSC 2207Acetic acid, 2-methoxy-1-methylethyl ester2-Propanol, 1-methoxy-, 2-acetatePropylene glycol 1-methyl ether 2-acetateNSC-2207PROPYLENEGLYCOLMETHYLETHERACETATEPA7O2U6S2QPropylene Glycol 1-Monomethyl Ether 2-Acetate1,2-Propanediol monomethyl ether acetatePropylene glycol monomethyl ether acetate (PMA)Dowanol (R) PMA glycol ether acetateEINECS 203-603-9UNII-PA7O2U6S2Q
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant7946

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Call for medical aid.; EYES: Wash with water for 15 min.; call a physician.; SKIN: Remove contaminated clothing and wash skin with soap and water.; INGESTION: Induce vomiting after drinking two glasses of water. (USCG, 1999) Source: CAMEO Chemicals
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 3028) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (> 99.9%): Flammable liquid and vapor [Warning Flammable liquids]; H336 (15.6%): May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P271, P280, P303+P361+P353, P304+P340, P319, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 3028 reports by companies from 38 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 3028 reports by companies.; There are 37 notifications provided by 3027 of 3028 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: NITE-CMC
  • Precautionary Statement Codes: P261, P264+P265, P271, P304+P340, P305+P351+P338, P319, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: IDENTIFICATION AND USE: 1-Methoxy-2-propyl acetate is used as a solvent in cosmetic formulations, as well as in surface coatings, inks, and cleaners. HUMAN STUDIES: The substance defats the skin, which may cause dryness or cracking. It is irritating to the eyes and respiratory tract. Exposure at high levels could cause depression of the central nervous system. ANIMAL STUDIES: Watery eyes, anorexia, rapid shallow breathing, and excess salivation were observed in rats given a single dose of 4000, 6300, or 10,000 mg/kg 1-methoxy-2-propyl acetate. 1-Methoxy-2-propyl acetate was not a skin irritant in rabbits. 10% 1-methoxy-2-propyl acetate in water was not a sensitizer in a guinea pig maximization test. Some slight changes were observed in the appearance of renal tissues in rats exposed to 3000 ppm 1-methoxy-2-propyl acetate. Slight to moderate degeneration of the olfactory epithelium in the nasal cavities was seen in rats and in mice. 1-Methoxy-2-propyl acetate had no adverse effect on reproductive parameters in rat developmental studies. 1-Methoxy-2-propyl acetate did not induce mutations or toxicity in Salmonella typhimurium strains TA98, TA100, TA1535, or TA1537 or in Escherichia c Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for 1-methoxy-2-propyl acetate(SRC), using a log Kow of 0.56(1) and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), a measured log Koc of 0.362, corresponding to a Koc of 2.3(2) indicates that 1-methoxy-2-propyl acetate is expected to have very high mobility in soil(SRC). Volatilization of 1-methoxy-2-propyl acetate from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.4X10-6 atm-cu m/mole(SRC), based upon its vapor pressure, 3.92 mm Hg(3), and water solubility, 1.98X10+5 mg/L(2). 1-Methoxy-2-propyl acetate is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(2). 50% Biodegradation in less than one day using sandy and sandy loam soils(4) suggests that biodegradation is an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), a measured log Koc of 0.362, corresponding to a Koc of 2.3(2) indicates that 1-methoxy-2-propyl acetate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 3.4X10-6 atm-cu m/mole(SRC), derived from its vapor pressure, 3.92 mm Hg(4), and water solubility, 1.2X10+5 mg/L(2). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 12 and 93 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow of 0.56(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low(SRC). 100% Biodegadation in the Zahn-Wellens test(7) indicates that biodegradation is an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 1-methoxy-2-propyl acetate, which has a vapor pressure of 3.92 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 1-methoxy-2-propyl acetate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 32 hrs(SRC), calculated from its rate constant of 1.2X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). d(1); this corresponds to half-lives of 2.4 yrs and 88 days at pH values of 7 and 8, respectively(1). Using an atmospheric simulation chamber, no photolysis of 1-methoxy-2-propyl acetate was observed(4); therefore, the compound is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Consumer Uses: Cleaning agent; Not Known or Reasonably Ascertainable; Filler; Hardener; Pigment; Defoamer; Polymerization promoter; Dispersing agent; Solvent; Insulators; Binder; Monomers; Semiconductor and photovoltaic agent; Tanning agents not otherwise specified Source: EPA Chemical Data Reporting (CDR)
  • Industry Uses: Not Known or Reasonably Ascertainable; Diluent; Cleaning agent; Hardener; Pigment; Drier; Adhesion/cohesion promoter; Intermediate; Other; Binder; Polymerization promoter; Solvent; Dispersing agent; Plating agent; Chemical reaction regulator; UV stabilizer; Processing aids not otherwise specified; Semiconductor and photovoltaic agent; Monomers; Tanning agents not otherwise specified Source: EPA Chemical Data Reporting (CDR)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 108-65-6 est utilisé sur ce site

Le CAS 108-65-6 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 0 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 108-65-6 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.