Aller au contenu principal
CAS 1 fiche

CAS 108-45-2

Le CAS 108-45-2 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 108-45-2

1 au total

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 108-45-2
CAS 108-45-2PubChem CID 7935

M-Phenylenediamine

1,3-phenylenediamine is a phenylenediamine taht is benzene substituted at positions 1 and 3 with amino functions. — ChEBI

Nom IUPAC
benzene-1,3-diamine
Formule moléculaire
C6H8N2
Masse moléculaire
108.14 g/mol
Masse exacte
108.068748264 Da
XLogP3
-0,3
Surface polaire topologique
52,0 Ų
Donneurs de liaisons hydrogène
2
Accepteurs de liaisons hydrogène
2
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

1,3-Phenylenediamine1,3-BENZENEDIAMINE1,3-Diaminobenzene3-Aminoanilinem-Diaminobenzenem-Aminoanilinemeta-PhenylenediamineDeveloper C
16 autres noms signalés
Developer 113-PhenylenediamineMetaphenylenediaminem-BenzenediamineDeveloper HDeveloper MDirect Brown BRDirect Brown GGm-FenylendiaminC.I. Developer 11meta-Aminoanilinemeta-Benzenediaminemeta-DiaminobenzeneCI Developer 11Benzene, 1,3-diamino-APCO 2330
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant7935

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P261, P262, P264, P264+P265, P270, P271, P272, P273, P280, P301+P316, P302+P352, P304+P340, P305+P351+P338, P316, P318, P321, P330, P333+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H301+H311+H331 (23.9%): Toxic if swallowed, in contact with skin or if inhaled [Danger Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (100%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H331 (100%): Toxic if inhaled [Danger Acute toxicity, inhalation]; H341 (99.7%): Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H400 (96.2%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (100%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P261, P262, P264, P264+P265, P270, P271, P272, P273, P280, P301+P316, P302+P352, P304+P340, P305+P351+P338, P316, P318, P321, P330, P333+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 343 reports by companies from 16 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P260, P261, P264, P264+P265, P270, P272, P273, P280, P301+P316, P302+P352, P305+P351+P338, P308+P316, P317, P319, P321, P330, P333+P317, P337+P317, P362+P364, P391, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P272, P280, P301+P316, P302+P352, P305+P351+P338, P308+P316, P317, P318, P319, P321, P330, P333+P317, P337+P317, P362+P364, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Cosmetic Ingredient Review Conclusion: On the basis of the animal and clinical data included in this report, the CIR Expert Panel concludes that m-Phenylenediamine and m-Phenylenediamine Sulfate are safe for use in hair dyes at concentrations of up to 10%. Source: Cosmetic Ingredient Review (CIR)
  • Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Source: Cosmetic Ingredient Review (CIR)
  • Environmental Bioconcentration: An estimated BCF value of 0.33 was calculated for 1,3-benzenediamine(SRC), using an estimated log Kow of -0.33(1) and a recommended regression-derived equation(2). BCF values of 1.3 to 4.6 and <1.6 to 24 were measured for 1,3-benzenediamine in carp at 2 and 0.2 mg/l, respectively(3). According to a classification scheme(4), these BCF values suggest that bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 16(SRC), determined from a measured log Kow of -0.33(2) and a recommended regression-derived equation(3), indicates that 1,3-benzenediamine is expected to have very high mobility in soil(SRC). However, anilines are expected to bind strongly to humus or organic matter in soils due to the high reactivity of the aromatic amino group(4,5); therefore, mobility may be much lower in some soils(SRC). Volatilization of 1,3-benzenediamine is not expected to be important from moist soil surfaces(SRC) given an estimated Henry's Law constant of 1.3X10-9 atm-cu m/mole(SRC), from its extrapolated vapor pressure, 2.1X10-3 mm Hg(6), and measured water solubility, 2.4X10+5 mg/l(7). 1,3-Benzenediamine is not expected to volatilize from dry soil surfaces based on its extrapolated vapor pressure(6). Limited biodegradation data indicate 1,3-benzenediamine may be resistant to biodegradation in soil; soil microflora did not cleave the benzene ring of 1,3-benzenediamine in 64 days(8). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 16(SRC), determined from a measured log Kow of -0.33(2) and a recommended regression-derived equation(3), indicates that 1,3-benzenediamine is not expected to adsorb to suspended solids and sediment in water(SRC). However, aromatic amines are recognized as having a strong affinity to organic carbon, suggesting that this compound may bind strongly to suspended organic material in water(4,5). 1,3-Benzenediamine is not expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 1.3X10-9 atm-cu m/mole(SRC), derived from its extrapolated vapor pressure, 2.1X10-3 mm Hg(6), and measured water solubility, 2.4X10+5 mg/l(7). 1,3-Benzenediamine may exist partially in the ionized form at environmental pH's based on pKa values of 2.65 and 4.88 at 25 °C(8). Volatilization of the ionized form is not expected to be an important fate process(SRC). According to a classification scheme(9), BCF values of 1.3 to 4.6 and <1.6 to 24 measured for 1,3-benzenediamine in carp at 2 and 0.2 mg/l, respectively(10), suggest that bioconcentration in aquatic organisms is low(SRC). 1,3-Benzen Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 1,3-benzenediamine, which has an extrapolated vapor pressure of 2.1X10-3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 1,3-benzenediamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 1.9 hours(3,SRC). 1,3-Benzenediamine absorbs light in the environmental spectrum(4), which suggests a potential for direct photolysis in the environment(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Adhesion/cohesion promoter; Intermediate; Surface modifier; Dye; Flame retardant; Not Known or Reasonably Ascertainable; Other Source: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: m-Phenylenediamine Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used to make diisocyanates for the production of polyurethane foams and other resins and polymers; Also used as a corrosion inhibitor, curing agent, photographic developer, and intermediate for other chemical products; [CHEMINFO] Used to make dyes, to develop dyes, to dye hair, and to cure epoxy resins; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Plastic Composites Manufacturing [Category: Industry]; Photographic Processing [Category: Other]; Dressing Hair [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: MFR DYES; RUBBER CURING AGENTS; ION EXCHANGE RESINS, DECOLORIZING RESINS, FORMALDEHYDE CONDENSATES; RESINOUS POLYAMIDES, BLOCK POLYMERS, TEXTILE FIBERS, URETHANES, PETROLEUM ADDITIVES, RUBBER CHEMICALS; IN CORROSION INHIBITORS; IN PHOTOGRAPHY; AS REAGENT FOR GOLD & BROMINE Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Dyestuff manufacture, detection of nitrite, textile developing agent, laboratory reagent, vulcanizing agent. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: IT IS ... EMPLOYED AS CURING AGENT TO HARDEN EPOXY RESINS USED IN CASTING & PLASTIC TOOLING, LAMINATING APPLICATIONS & IN ADHESIVES. IT IS ADDED TO ISOPHTHALOYL CHLORIDE TO PRODUCE POLY-META-PHENYLENE ISOPHTHALAMIDE RESIN, A POLYAMIDE FIBER (NOMEX) USED IN HIGH-TEMP APPLICATIONS, EG PROTECTIVE CLOTHING ... Source: Hazardous Substances Data Bank (HSDB)
  • Uses: ... CAN BE USED FOR PRODN OF OVER 140 DYES, 37 OF WHICH ARE BELIEVED TO HAVE COMMERCIAL ... SIGNIFICANCE. ... THESE DYES ARE USED TO COLOR VARIOUS TEXTILE FIBERS & OTHER MATERIALS, EG, LEATHER, PAPER, POLISHES, SPIRIT INKS ... ALSO USED AS DIRECT DYE DEVELOPER TO OBTAIN BLACK, BLUE & BROWN SHADES ... AND IT IS INCL IN HAIR-DYE FORMULATIONS TO PRODUCE BROWN, GOLDEN-BLOND, BLUE & GRAY SHADES ON THE HAIR. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for 1,3-BENZENEDIAMINE (11 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 108-45-2 est utilisé sur ce site

Le CAS 108-45-2 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 108-45-2 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.

Questions fréquentes

Une substance identifiée par le CAS 108-45-2 peut figurer dans plusieurs annexes du règlement de l’UE sur les cosmétiques lorsqu’elle est soumise à des conditions différentes selon les contextes. Par exemple, une substance peut être soumise à restrictions à l’annexe III avec des conditions précises, et le même CAS peut aussi figurer à l’annexe IV comme colorant autorisé, dans une entrée distincte avec ses propres conditions. Chaque entrée doit être examinée individuellement.

Recoupez le numéro CAS avec les fiches de spécification de vos matières premières et vos certificats d’analyse. Lorsqu’un CAS figure à l’annexe II, vérifiez son absence. Lorsqu’il figure à l’annexe III, vérifiez que les limites de concentration et les conditions de type de produit sont respectées dans votre formulation. Toutes les entrées d’annexe partageant ce numéro CAS sont énumérées ci-dessus.

Un numéro CAS est attribué par le Chemical Abstracts Service (États-Unis) et reconnu dans le monde entier. Un numéro CE est un identifiant de la Commission européenne issu d’inventaires tels que l’EINECS, l’ELINCS ou la liste NLP. Les deux identifiants peuvent figurer dans les entrées des annexes cosmétiques de l’UE. Certaines substances ont les deux, d’autres un seul, et certaines entrées plus anciennes peuvent n’en avoir aucun.

Le vérificateur INCI accepte les noms d’ingrédients, les numéros CAS et les numéros CE. Vérifiez directement ce numéro CAS, puis contrôlez le résultat auprès des fiches de spécification des fournisseurs et de toutes les conditions d’annexe associées.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète, puis utilisez le CAS 108-45-2 pour recouper les documents fournisseurs relatifs aux substances identifiées.

Vérificateur INCI

Parcourir les annexes

Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.

Toutes les annexes

Rechercher par nom

Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 108-45-2 dans votre documentation.

Rechercher