Aller au contenu principal
CAS 0 fiche

CAS 105-59-9

Le CAS 105-59-9 correspond à 0 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 105-59-9

0 au total
Aucune fiche trouvée pour ce numéro CAS.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 105-59-9
CAS 105-59-9PubChem CID 7767

N-Methyldiethanolamine

Methyldiethanolamine is a colorless liquid. (USCG, 1999) — CAMEO Chemicals

Nom IUPAC
2-[2-hydroxyethyl(methyl)amino]ethanol
Formule moléculaire
C5H13NO2
Masse moléculaire
119.16 g/mol
Masse exacte
119.094628657 Da
XLogP3
-1,1
Surface polaire topologique
43,7 Ų
Donneurs de liaisons hydrogène
2
Accepteurs de liaisons hydrogène
3
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

MethyldiethanolamineMethyl diethanolamineN-MethylaminodiglycolEthanol, 2,2'-(methylimino)bis-2,2'-(Methylimino)diethanolN-MethyliminodiethanolDiethanolmethylamineMethyliminodiethanol
16 autres noms signalés
USAF DO-52Bis(2-hydroxyethyl)methylamineMethylbis(2-hydroxyethyl)amineN-Methyl-2,2'-iminodiethanolN-MethyldiethanolimineN,N-Bis(2-hydroxyethyl)methylamineEthanol, 2,2'-(methylimino)di-N,N-Di(2-hydroxyethyl)-N-methylamine2-(N-2-Hydroxyethyl-N-methylamino)ethanolMdea (diol)NSC-116903IG3K131QJMDEA amineRefChem:163819203-312-7MDEA
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant7767

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Toxicity Summary: IDENTIFICATION AND USE: N-Methyldiethanolamine (MDEA) is a colorless liquid. MDEA is used as an intermediate, in absorption of acidic gases, as a catalyst for polyurethane foams, and pH control agent. HUMAN STUDIES: There are no data available. ANIMAL STUDIES: MDEA was irritating to the guinea pig skin, and showed potential to induce allergic contact dermatitis. MDEA caused slight eye irritation. In rats, recurrent skin application of MDEA produced a dose-related irritant effect, but there was no evidence for systemic cumulative or specific target organ or tissue toxicity. Rat dams showed dose-dependent skin irritation following repeated cutaneous application of MDEA during pregnancy. In addition, maternal toxicity was also present as anemia in dams receiving 1000 mg/kg/day. Despite maternal toxicity, there was no evidence of developmental effects. MDEA was not genotoxic when tested in the Salmonella/microsome reverse gene mutation test, the CHO/HGPRT forward gene mutation test, a sister chromatid exchange test in cultured CHO cells, and an in vivo peripheral blood micronucleus test in mice. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for N-methyldiethanolamine(SRC), using an estimated log Kow of -1.50(1) and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that N-methyldiethanolamine is expected to have very high mobility in soil(SRC). The pKa of N-methyldiethanolamine is 8.52(3), indicating that this compound will exist partially in the cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of the cation from moist soil is not expected because cations do not volatilize(SRC). Volatilization of neutral N-methyldiethanolamine from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.1X10-11 atm-cu m/mole(SRC) based upon its vapor pressure, 2.0X10-4 mm Hg(5), and assigned value for water solubility of 1X10+6 mg/L (miscible)(6). N-Methyldiethanolamine is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(5). N-Methyldiethanolamine did not biodegrade after 28 days in activated sludge, but degraded >96% after 40 days in a continuous-flow experiment where the inoculum had time to accli Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that N-methyldiethanolamine is not expected to adsorb to suspended solids and sediment(SRC). A pKa of 8.52(3) indicates N-methyldiethanolamine will exist partially in the cation form at pH values of 5 to 9 and, therefore, volatilization of the cation from water surfaces is not expected to be an important fate process(SRC). Volatilization of neutral N-methyldiethanolamine from water surfaces is not expected(4) based upon an estimated Henry's Law constant of 3.1X10-11 atm-cu m/mole(SRC) derived from its vapor pressure, 2.0X10-4 mm Hg(5), and assigned value for water solubility of 1X10+6 mg/L (miscible)(6). N-Methyldiethanolamine is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(4). According to a classification scheme(7), an estimated BCF of 3(SRC), from an estimated log Kow of -1.50(2) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low. N-Methyldiethanolamine did not biodegrade after 28 days in Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), N-methyldiethanolamine, which has a vapor pressure of 2.0X10-4 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase N-methyldiethanolamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 4 hours(SRC), calculated from its rate constant of 9.7X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). N-Methyldiethanolamine does not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Processing aids, specific to petroleum production; Intermediate; Absorbent; pH regulating agent; Solvent; Other Source: EPA Chemical Data Reporting (CDR)
  • Sources/Uses: Used as an intermediate, to absorb acidic gases, as catalyst for polyurethane foams, and pH control agent; [HSDB] Used in chemical syntheses (i.e. pharmaceuticals and cationic surfactants), as a cleaning-washing agent, pH regulator (coating manufacture), and solvent (removal of acid gases in oil refineries); [IUCLID] Used to make fine and large scale chemicals, as a catalyst in polymerization reactions, laboratory reagent, additive in coatings and concrete-cement, in gas treatment, and lubricants and metalworking fluids; [ExPub: ECHA REACH Registrations] Permitted for use as an inert ingredient in non-food pesticide products; [EPA] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Metal Machining [Category: Heat or Machine]; Petroleum Production and Refining [Category: Industry]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Cement Producing [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For N-methyldiethanolamine (USEPA/OPP Pesticide Code: 011600) there are 0 labels match. /SRP: Not registered for current use in the USA, but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Surfactant intermediate Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Intermediate, absorption of acidic gases, catalyst for polyurethane foams, pH control agent. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Methyldiethanolamine (MDEA) and solutions of MDEA have increased in use for gas treating. Additional gas treating capacity can often be obtained with the same working equipment, because of the higher amine concentrations that can be used. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: /SRP: Chemical Weapons Convention/ Schedule 3B Precursor to HN2 (Bis(2-chloroethyl)methylamine). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
EMBL-EBI ChEBIAucune fiche exacte2026-08-31
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 105-59-9 est utilisé sur ce site

Le CAS 105-59-9 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 0 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 105-59-9 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.