Aller au contenu principal
Annexe III Entrée 346 Modifiée 3 Oct 2023

Vanillin

4-Hydroxy- 3-methoxybenz- aldehyde

Vanillin figure à l’annexe III et ne peut être utilisé que dans les conditions indiquées dans cette fiche.

Substance soumise à restrictions— Annexe III, Règlement (CE) n° 1223/2009
Entrée: 346

Détails de la fiche

Autres restrictions

The presence of the substance shall be indicated in the list of ingredients referred to in Article 19(1), point (g), when its concentration exceeds: — 0,001 % in leave-on products — 0,01 % in rinse-off products.

Nom du glossaire INCI

Vanillin

Nom chimique

4-Hydroxy- 3-methoxybenz- aldehyde

Informations réglementaires

Règlement

(EU) 2023/1545

Voir toutes les entrées fixées par cet acte

Ingrédients identifiés

Données clés

Annexe
Numéro d’entrée
346

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 121-33-5
CAS 121-33-5PubChem CID 1183

Vanillin

Vanillin is a member of the class of benzaldehydes carrying methoxy and hydroxy substituents at positions 3 and 4 respectively. It has a role as an antioxidant, a flavouring agent, an anticonvulsant, an anti-inflammatory agent and a plant metabolite. It is a member of benzaldehydes, a monomethoxybenzene and a member of phenols. — ChEBI

Nom IUPAC
4-hydroxy-3-methoxybenzaldehyde
Formule moléculaire
C8H8O3
Masse moléculaire
152.15 g/mol
Masse exacte
152.047344113 Da
XLogP3
1,2
Surface polaire topologique
46,5 Ų
Donneurs de liaisons hydrogène
1
Accepteurs de liaisons hydrogène
3
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Vanillic aldehydeVanillaldehydep-VanillinVanillineLioxin3-Methoxy-4-hydroxybenzaldehyde4-Hydroxy-3-methoxy-benzaldehydeBenzaldehyde, 4-hydroxy-3-methoxy-
16 autres noms signalés
4-Hydroxy-m-anisaldehyde2-Methoxy-4-formylphenolZimcop-Hydroxy-m-methoxybenzaldehyde4-Formyl-2-methoxyphenolMethylprotocatechuic aldehyde4-Hydroxy-5-methoxybenzaldehydem-Anisaldehyde, 4-hydroxy-Protocatechualdehyde, methyl-RhovanilFEMA No. 3107vanilineProtocatechualdehyde 3-methyl etherOleoresin vanillam-Methoxy-p-hydroxybenzaldehydeVanillin Melting Point Standard
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant1183

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Note: This chemical does not meet GHS hazard criteria for 1.8% (42 of 2387) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H317 (14.3%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (83.5%): Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P264+P265, P272, P280, P302+P352, P305+P351+P338, P321, P333+P317, P337+P317, P362+P364, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2387 reports by companies from 28 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 42 of 2387 reports by companies.; There are 27 notifications provided by 2345 of 2387 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H411 (100%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P264, P270, P273, P301+P317, P330, P391, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: The GHS information provided by 1 company from 1 notification to the ECHA C&L Inventory. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P264+P265, P273, P305+P351+P338, P337+P317, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: IDENTIFICATION: Small quantities of vanillin are used in perfumery to round and fix sweet, balsamic fragrances. Vanillin is also used as a brightener in galvanotechnical processes and is an important intermediate in, for example, the production of pharmaceuticals such as l-3,4-dihydroxyphenylalanine (l-DOPA) and methyldopa. For vanillin (USEPA/OPP Pesticide Code: 115801) there are 0 labels match. /Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Pharmaceutic aid (flavor). As a flavoring agent in confectionery, beverages, foods and animal feeds. Fragrance and flavor in cosmetics. Reagent for synthesis. HUMAN EXPOSURE AND TOXICITY: In closed-patch tests on human skin vanillin caused no primary irritation when tested at concentrations of 20% on 29 normal subjects, at 2% on 30 normal subjects, and at 0.4% on 35 subjects with dermatoses. Maximization tests were conducted on groups of 25 volunteers. The material was tested at concentrations of 2 and 5% in petrolatum and produced no sensitization reactions. Vanillin was considered to be a secondary all Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for vanillin(SRC), using a log Kow of 1.37(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that vanillin is expected to have very high mobility in soil(SRC). The pKa of vanillin is 7.4(3), indicating that this compound will exist partially in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of the neutral species from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.2X10-9 atm-cu m/mole(SRC), based upon its vapor pressure, 1.18X10-4 mm Hg(5), and water solubility, 1.102X10+4 mg/L(6). Vanillin is not expected to volatilize from dry soil surfaces(SRC) based upon its estimated vapor pressure(5). A 97% of theoretical BOD using activated sludge in the Japanese MITI test(7) suggests that biodegradation is an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that vanillin is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 2.2X10-9 atm-cu m/mole(4) derived from its vapor pressure, 1.18X10-4 mm Hg(4), and water solubility, 1.102X10+4 mg/L(5). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow of 1.37(7) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). A 97% of theoretical BOD using activated sludge in the Japanese MITI test(8) suggests that biodegradation is an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), vanillin, which has a vapor pressure of 1.18X10-4 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase vanillin is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 14 hours(SRC), calculated from its rate constant of 2.7X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase vanillin may be removed from the air by wet and dry deposition(SRC). Vanillin contains chromophores that absorb at wavelengths >290 nm(4) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Found in foods and plants; Used as a flavoring agent and fragrance; [Merck Index] Used as a chemical intermediate, fuel additive, odor agent, and anti-UV agent; [IUCLID] In the group of essential oils with active product registrations in the US for uses as insect feeding depressants, insecticides, and repellants; Used to control clothes moths and fleas; [EPA REDs] Used in attractants for the control of flies, roaches, and crickets; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Farming (Pesticides) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For vanillin (USEPA/OPP Pesticide Code: 115801) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Pharmaceutic aid (flavor). As a flavoring agent in confectionery, beverages, foods and animal feeds. Fragrance and flavor in cosmetics. Reagent for synthesis. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Source of L-dopa. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: The single largest use for vanillin is as a starting material for the manufacture of an antihypertensive drug having the chemical name of methyldopa or L-3-(3,4-dihydroxyphenyl)-2-methylalanine. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for VANILLIN (8 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Liens d’inventaire pour Vanillin

Inventaire Identified ingredient
Réf. 38868

VANILLIN

CAS: 121-33-5
EC: 204-465-2

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe III sont donc également affichées.

Annexe III 343
Fiche voisine dans la même annexe

Terpineol

CAS: 8000-41-7 / 98-55-5 / 138-87-4 / 586-81-2
EC: 232-268-1 / 202-680-6 / 205-342-6 / 209-584-3
Annexe III 342
Fiche voisine dans la même annexe

Sclareol

CAS: 515-03-7
EC: 208-194-0
Annexe III 341
Fiche voisine dans la même annexe

Santalol

CAS: 11031-45-1 / 115-71-9 / 77-42-9
EC: 234-262-4 / 204-102-8 / 201-027-2
Annexe III 340
Fiche voisine dans la même annexe

Salicylaldehyde

CAS: 90-02-8
EC: 201-961-0
Annexe III 352
Fiche voisine dans la même annexe

Citrus Aurantium Bergamia Peel Oil

CAS: 8007-75-8 89957-91-5 68648-33-9 / 8007-75-8 / 85049-52-1
EC: 616-915-9 289-612-9- / 616-915-9

Ce que signifie l’annexe III pour Vanillin

Vanillin est une substance soumise à restrictions en vertu de l’annexe III du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques. Son utilisation dans les cosmétiques n’est autorisée que dans les conditions précises énoncées dans l’entrée ci-dessus, y compris les limites de concentration, les restrictions de type de produit et les mentions d’avertissement requises.

Lorsque cette substance entre dans une formulation, toutes les conditions — concentration maximale, champ d’application du produit et mentions d’avertissement — doivent être respectées simultanément. Le respect d’une condition ne dispense pas des autres.

Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Consignez les conditions d’emploi dans le dossier d’information produit (DIP).

Questions fréquentes

Vanillin figure à l’annexe III du règlement (CE) n° 1223/2009 comme substance soumise à restrictions. Il ne peut être utilisé que dans les conditions précisées dans l’entrée, y compris toute concentration maximale, limitation de type de produit et mention d’avertissement requise indiquées ci-dessus.

Le CAS 121-33-5 est l’identifiant numérique unique attribué à Vanillin par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche Vanillin de l’annexe III

Cette page résume une fiche de l’annexe III pour Vanillin à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe III pour Vanillin, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter Vanillin et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez Vanillin côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe III et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe III