bis(2-Methoxyethyl) ether (Dimethoxydiglycol)
bis(2-Methoxyethyl) ether (Dimethoxydiglycol) figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.
Détails de la fiche
Nom chimique
bis(2-Methoxyethyl) ether (Dimethoxydiglycol)
Nom chimique / IUPAC
Dimethoxydiglycol
Informations réglementaires
Avis du SCCS
- Opinion concerning Chemical Ingredients in Cosmetic Products classified as Carcinogenic, Mutagenic or Toxic to Reproduction according to the Chemicals Directive 67/548/EECC
- Opinion concerning Chemical Ingredients in Cosmetic Products classified as Carcinogenic, Mutagenic or Toxic to Reproduction according to the Chemicals Directive 67/548/EEC
Ingrédients identifiés
CMR
| Catégorie | Carcinogenic | Mutagenic | Reprotoxic |
|---|---|---|---|
| Cat. 1B | — | — | ✓ |
Données clés
Identité et propriétés chimiques

Diglyme
Diglyme is a polyether that is the dimethyl ether derivative of diethylene glycol. It has a role as a xenobiotic, a solvent and an environmental contaminant. It is functionally related to a diethylene glycol. — ChEBI
- Nom IUPAC
- 1-methoxy-2-(2-methoxyethoxy)ethane
- Formule moléculaire
- C6H14O3
- Masse moléculaire
- 134.17 g/mol
- Masse exacte
- 134.094294304 Da
- XLogP3
- -0,4
- Surface polaire topologique
- 27,7 Ų
- Donneurs de liaisons hydrogène
- 0
- Accepteurs de liaisons hydrogène
- 3
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:46784
- ChEMBL:CHEMBL1234162
- EPA DTXSID:DTXSID1024621
- PubMed:22731510
- PubMed:22668072
- PubMed:22667984
- PubMed:22655237
- PubMed:22568515
- PubMed:22524204
- PubMed:22423271
- PubMed:22215139
- PubMed:22193947
- PubMed:22134711
- PubMed:22080539
- PubMed:21957120
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 190 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 321 to 324 °F at 760 mmHg ; 241 °F at 200 mmHg; 167 °F at 35 mmHg; 68 °F at 3 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: boiling point equals 321 to 324 °F Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Boiling Point: 162 °C at 760 mm Hg; 116 °C at 200 mm Hg; 75 °C at 35 mm Hg; 20 dg C at 3 mm Hg Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 162 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 162 °C @760 [mm Hg] Source: PAC Chemical Database, U.S. Department of Energy
- Color/Form: Colorless liquid Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.945 at 68 °F (USCG, 1999) - Less dense than water; will float Source: CAMEO Chemicals
- Density: Sp gr: 0.9451 at 20 °C/20 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 0.95 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 0.9451 @25 °C Source: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 153 to 158 °F (NTP, 1992) Source: CAMEO Chemicals
- Flash Point: Flash point equals 153 to 158 °F Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 153 °F (67 °C) (CLOSED CUP) Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: 51 °C c.c. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- LogP: log Kow = -0.36 Source: Hazardous Substances Data Bank (HSDB)
- LogP: -0.36 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -90 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: -68 °C Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: -68 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -68 °C Source: PAC Chemical Database, U.S. Department of Energy
- Odor: Mild odor Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: Diethylene glycol dimethyl ether is a colorless watery liquid with a pleasant odor. Floats and mixes with water. (USCG, 1999) Source: CAMEO Chemicals
- Physical Description: Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Clear liquid with a pleasant odor; [CAMEO] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Refractive Index: Index of refraction: 1.4097 at 20 °C/D Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible (NTP, 1992) Source: CAMEO Chemicals
- Solubility: Miscible with alcohol, ether, hydrocarbon solvents Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in benzene Source: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, miscible Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: miscible Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 2.96 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: Vapor pressure, kPa at 20 °C: 0.33 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Viscosity: 1.089 cP at 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by inhalation of its vapour, by ingestion and through the skin. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
- Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P318, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H226 (93%): Flammable liquid and vapor [Warning Flammable liquids]; H360 (90.8%): May damage fertility or the unborn child [Danger Reproductive toxicity] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P318, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 811 reports by companies from 16 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Danger Source: NITE-CMC
- GHS Hazard Statements: H360: May damage fertility or the unborn child [Danger Reproductive toxicity] Source: NITE-CMC
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Signal: Warning Source: NITE-CMC
- GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Source: NITE-CMC
- NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol dimethyl ether(SRC), using a log Kow of -0.36(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a log Kow of -0.36(2) and a regression-derived equation(3), indicates that diethylene glycol dimethyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol dimethyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 5.2X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 2.96 mm Hg(4), and assigned value for water solubility of 1X10+6 mg/L (miscible)(5). Diethylene glycol dimethyl ether is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). Diethylene glycol dimethyl ether was degraded 33% after 25 days and a 7 day lag period using an activated sludge from an industry producing the chemical(6), indicating that biodegradation may be an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a log Kow of -0.36(2) and a regression-derived equation(3), indicates that diethylene glycol dimethyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 5.2X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 2.96 mm Hg(4), and assigned value for water solubility of 1X10+6 mg/L (miscible)(5). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Diethylene glycol dimethyl ether was biodegraded 33% after 25 days and a 7 day lag period using an activated sludge from an industry producing the chemical(8), indicating that biodegradation may be an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol dimethyl ether, which has a vapor pressure of 2.96 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol dimethyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 hours(SRC), calculated from its rate constant of 1.75X10-11 cu cm/molecule-sec at 25 °C(3). Diethylene glycol dimethyl ether does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight(4). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Plasticizer; Monomers Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Solvent; Intermediate; Plasticizer; Not Known or Reasonably Ascertainable Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as a solvent and chemical intermediate; [Merck Index] Used in the coating industry and in photolithography to make semiconductor chips; Also used in adhesives, sealants, and automotive care products; [Reference #1] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Semiconductor Manufacturing [Category: Industry]; Painting (Solvents) [Category: Paint]; Working with Glues and Adhesives [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Solvent; reaction medium for Grignard and similar syntheses. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Diethylene glycol dimethyl ether is used as a solvent in chemical reactions involving metals and organometallic compounds. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Solubilizer Source: Hazardous Substances Data Bank (HSDB)
- Uses: Used in production of plastics. Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Liens d’inventaire pour bis(2-Methoxyethyl) ether (Dimethoxydiglycol)
Fiches associées pour bis(2-Methoxyethyl) ether (Dimethoxydiglycol)
Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.
bis(2-Ethylhexyl) phthalate; (Diethylhexyl phthalate)
bis(2-Methoxyethyl) phthalate
2-Methoxypropyl acetate
2-Ethylhexyl[[[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]-methyl]thio]acetate
Urethane (Ethyl carbamate)
Acrylamide, unless regulated elsewhere in this Regulation
Dimethylcarbamoyl chloride
Ce que signifie l’annexe II pour bis(2-Methoxyethyl) ether (Dimethoxydiglycol)
bis(2-Methoxyethyl) ether (Dimethoxydiglycol) figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.
Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.
Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.
Liste de contrôle de conformité
- Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
- Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
- Consignez le résultat du contrôle dans le dossier d’information produit (DIP).
- Cette substance a une classification CMR. Examinez le tableau CMR ci-dessus et vérifiez le statut actuel dans les annexes II/III avant toute utilisation.
Questions fréquentes
Note de source pour la fiche bis(2-Methoxyethyl) ether (Dimethoxydiglycol) de l’annexe II
Cette page résume une fiche de l’annexe II pour bis(2-Methoxyethyl) ether (Dimethoxydiglycol) à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.
Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour bis(2-Methoxyethyl) ether (Dimethoxydiglycol), mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.
Outils et étapes suivantes
Vérifiez votre formule
Collez une liste INCI complète pour détecter bis(2-Methoxyethyl) ether (Dimethoxydiglycol) et d’autres fiches d’annexe de l’UE signalées en une seule passe.
Vérificateur INCIComparer des entrées
Comparez bis(2-Methoxyethyl) ether (Dimethoxydiglycol) côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.
ComparerParcourir l’annexe
Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.
Ouvrir l’annexe II