Aller au contenu principal
Annexe II Entrée 1703 Modifiée 17 Nov 2023

Benzophenone

Benzophenone figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 1703

Détails de la fiche

Nom chimique

Benzophenone

Informations réglementaires

Règlement

(EU) 2023/1490

Voir toutes les entrées fixées par cet acte

Ingrédients identifiés

Données clés

Annexe
Numéro d’entrée
1703

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 119-61-9
CAS 119-61-9PubChem CID 3102

Benzophenone

Benzophenone appears as white solid with a flowery odor. May float or sink in water. (USCG, 1999) — CAMEO Chemicals

Nom IUPAC
diphenylmethanone
Formule moléculaire
C13H10O
Masse moléculaire
182.22 g/mol
Masse exacte
182.073164938 Da
XLogP3
3,4
Surface polaire topologique
17,1 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
1
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Diphenyl ketoneBenzoylbenzeneMethanone, diphenyl-Phenyl ketonealpha-OxoditaneKetone, diphenylDiphenylketoneBenzene, benzoyl-
16 autres noms signalés
alpha-OxodiphenylmethaneKayacure bpAdjutan 6016Caswell No. 081GFEMA No. 2134NSC 8077CCRIS 629EPA Pesticide Chemical Code 000315701M4TTV9OCHEBI:41308AI3-00754NSC-8077RefChem:916948204-337-6diphenyl-methanone.alpha.-Oxoditane
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant3102

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H350: May cause cancer [Danger Carcinogenicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for 1.8% (84 of 4790) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H373 (37.4%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H411 (74.8%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P260, P273, P319, P391, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 4790 reports by companies from 68 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 84 of 4790 reports by companies.; There are 67 notifications provided by 4706 of 4790 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H350: May cause cancer [Danger Carcinogenicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P264, P270, P280, P301+P317, P318, P319, P330, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: NITE-CMC
  • Health Effects: Acute exposure to cholinesterase inhibitors can cause a cholinergic crisis characterized by severe nausea/vomiting, salivation, sweating, bradycardia, hypotension, collapse, and convulsions. Increasing muscle weakness is a possibility and may result in death if respiratory muscles are involved. Accumulation of ACh at motor nerves causes overstimulation of nicotinic expression at the neuromuscular junction. When this occurs symptoms such as muscle weakness, fatigue, muscle cramps, fasciculation, and paralysis can be seen. When there is an accumulation of ACh at autonomic ganglia this causes overstimulation of nicotinic expression in the sympathetic system. Symptoms associated with this are hypertension, and hypoglycemia. Overstimulation of nicotinic acetylcholine receptors in the central nervous system, due to accumulation of ACh, results in anxiety, headache, convulsions, ataxia, depression of respiration and circulation, tremor, general weakness, and potentially coma. When there is expression of muscarinic overstimulation due to excess acetylcholine at muscarinic acetylcholine receptors symptoms of visual disturbances, tightness in chest, wheezing due to bronchoconstriction, incre Source: Toxin and Toxin Target Database (T3DB)
  • Toxicity Summary: IDENTIFICATION AND USE: Benzophenone (BZP) comes in the form of orthorhombic prisms, monoclinic prisms, and white crystals. It has a characteristic sweet geranium or rose-like odor. BZP is used as a photoinitiator, a fragrance enhancer, an ultraviolet stabilizer, and, occasionally, as a flavor ingredient; it is also used in the manufacture of insecticides, agricultural chemicals, pharmaceuticals (antihistamines), hypnotics, paints, lacquers and cosmetics; and is an additive for plastics, coatings, and adhesives. Not registered for current use as a pesticide in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses. HUMAN EXPOSURE AND TOXICITY: There is limited information on the toxic effects of BZP in humans published. It showed little activity in the hormone-responsive reporter assay tested in various cell lines. ANIMAL STUDIES: BZP showed no estrogenic activity, however, after irradiating an aqueous solution of BZP with UV or sunlight, it can be converted into ring-hydroxylated derivatives (3-hydroxy BP (BP-3OH) and 4-hydroxyBP (BP-4OH)) that have estrogenic activity. BP-4OH was more Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Benzophenone is a cholinesterase or acetylcholinesterase (AChE) inhibitor. A cholinesterase inhibitor (or 'anticholinesterase') suppresses the action of acetylcholinesterase. Because of its essential function, chemicals that interfere with the action of acetylcholinesterase are potent neurotoxins, causing excessive salivation and eye-watering in low doses, followed by muscle spasms and ultimately death. Nerve gases and many substances used in insecticides have been shown to act by binding a serine in the active site of acetylcholine esterase, inhibiting the enzyme completely. Acetylcholine esterase breaks down the neurotransmitter acetylcholine, which is released at nerve and muscle junctions, in order to allow the muscle or organ to relax. The result of acetylcholine esterase inhibition is that acetylcholine builds up and continues to act so that any nerve impulses are continually transmitted and muscle contractions do not stop. Among the most common acetylcholinesterase inhibitors are phosphorus-based compounds, which are designed to bind to the active site of the enzyme. The structural requirements are a phosphorus atom bearing two lipophilic groups, a leaving group (such as a h Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: BCF values of 3.4-9.2 were measured using carp (Cyprinus carpio) which were exposed to benzophenone concentrations of 0.3 ppm over an 6-week period(1). According to a classification scheme(2), this BCF range suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), Koc values of 413(2) and 517(3) indicate that benzophenone is expected to have moderate to low mobility in soil(SRC). Volatilization of benzophenone from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.9X10-6 atm-cu m/mole(SRC), based upon its vapor pressure, 1.93X10-3 mm Hg(4), and water solubility, 137 mg/L(5). Benzophenone is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). Utilizing the Japanese MITI test, 0% of the Theoretical BOD was reached in 2 weeks(6) indicating that biodegradation is not an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), Koc values of 430(2) and 517(3) indicate that benzophenone is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(4) based upon an estimated Henry's Law constant of 1.9X10-6 atm-cu m/mole(SRC), derived from its vapor pressure, 1.93X10-3 mm Hg(5), and water solubility, 137 mg/L(6). Using this Henry's Law constant and an estimation method(4), volatilization half-lives for a model river and model lake are 15 and 110 days, respectively(SRC). According to a classification scheme(7), a BCF range of 3.4-9.2(8) suggests that bioconcentration in aquatic organisms is low(SRC). Utilizing the Japanese MITI test, 0% of the Theoretical BOD was reached in 2 weeks(8) indicating that biodegradation is not an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), benzophenone, which has a vapor pressure of 1.93X10-3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase benzophenone is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 3 days(SRC), calculated from its rate constant of 3.6X10-12 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Benzophenone absorbs UV light at wavelengths >290 nm(4) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Photosensitive agent; Surface modifier; Not Known or Reasonably Ascertainable; Anti-stain agent; Tanning agents not otherwise specified Source: EPA Chemical Data Reporting (CDR)
  • Sources/Uses: Used in perfumes, flavoring agents, and organic synthesis; Also used as an inhibitor of styrene polymerization, a photoinitiator, an ultraviolet curing agent, and an additive (plastics, cosmetics, coatings, and adhesives); [HSDB] Occurs naturally in some foods; [AIHA] Benzophenone (BZP), and substituted BZP numbered 1-12, trade mark Uvinul, are photo-screen agents widely used in sunscreens and in cosmetics, such as antiaging creams and hair sprays and shampoos, paints, and plastics. [Kanerva, p. 1755] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Painting (Pigments, Binders, and Biocides) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Plastic Composites Manufacturing [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For benzophenone (USEPA/OPP Pesticide Code: 000315) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Fixative for heavy perfumes, such as geranium, new-mown hay, especially when used in soaps. In the manufacture of antihistamines, hypnotics, insecticides. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Organic synthesis; ... derivatives are used as ultraviolet absorbers; flavoring; ... polymerization inhibitor for styrene Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Paints, lacquers and varnish industry, cosmetics, intermediate. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for BENZOPHENONE (7 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Benzophenone is found in fruits. Benzophenone is a widely used building block in organic chemistry, being the parent diarylketone. Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Liens d’inventaire pour Benzophenone

Inventaire Identified ingredient
Réf. 74467

BENZOPHENONE

CAS: 119-61-9
EC: 204-337-6

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 1698
Fiche voisine dans la même annexe

Tellurium dioxide

CAS: 7446-07-3
EC: 231-193-1

Ce que signifie l’annexe II pour Benzophenone

Benzophenone figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).

Questions fréquentes

Oui. Benzophenone figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 119-61-9 est l’identifiant numérique unique attribué à Benzophenone par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche Benzophenone de l’annexe II

Cette page résume une fiche de l’annexe II pour Benzophenone à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour Benzophenone, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter Benzophenone et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez Benzophenone côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II