Aller au contenu principal
Annexe II Entrée 1257 Modifiée 21 Oct 2010

4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products

4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 1257

Détails de la fiche

Nom chimique

4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products

Informations réglementaires

Données clés

CAS
121-57-3 / 515-74-2
EC
204-482-5 / 208-208-5
Annexe
Numéro d’entrée
1257

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 121-57-3
CAS 121-57-3PubChem CID 8479

Sulfanilic acid

4-aminobenzenesulfonic acid is an aminobenzenesulfonic acid that is aniline sulfonated at the para-position. It has a role as a xenobiotic, an allergen, a xenobiotic metabolite and an environmental contaminant. It is a conjugate acid of a 4-aminobenzenesulfonate. — ChEBI

Nom IUPAC
4-aminobenzenesulfonic acid
Formule moléculaire
C6H7NO3S
Masse moléculaire
173.19 g/mol
Masse exacte
173.01466426 Da
XLogP3
-0,6
Surface polaire topologique
88,8 Ų
Donneurs de liaisons hydrogène
2
Accepteurs de liaisons hydrogène
4
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Sulphanilic acidp-Aminobenzenesulfonic acidAniline-4-sulfonic acidAniline-p-sulfonic acidSulfanilsaeureAniline-p-sulphonic acidp-Aminophenylsulfonic acidp-Anilinesulfonic acid
16 autres noms signalés
Kyselina sulfanilovap-sulfoaniline4-Sulfoaniline4-Sulfanilic acidNSC 7170CCRIS 4576CHEBI:27500HSDB 5590EINECS 204-482-51-aminobenzene-4-sulfonic acidAI3-15414UNII-434Z8C2635NSC-71704-aminophenylsulfonic acidp-aminobenzene sulfonic acid434Z8C2635
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8479

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P261, P264, P264+P265, P272, P280, P302+P352, P305+P351+P338, P321, P332+P317, P333+P317, P337+P317, P362+P364, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H315 (98.6%): Causes skin irritation [Warning Skin corrosion/irritation]; H317 (98.6%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (99.8%): Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P264, P264+P265, P272, P280, P302+P352, P305+P351+P338, P321, P332+P317, P333+P317, P337+P317, P362+P364, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 442 reports by companies from 9 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: Not Classified Source: NITE-CMC
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: NITE-CMC
  • Precautionary Statement Codes: P261, P264+P265, P272, P280, P302+P352, P305+P351+P338, P321, P333+P317, P337+P317, P362+P364, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for sulfanilic acid(SRC), using a log Kow of -2.16(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that sulfanilic acid is expected to have very high mobility in soil(SRC). The pKa of sulfanilic acid is 3.25 at 25 °C(3), indicating that this compound will partially exist in anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of sulfanilic acid from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 8.9X10-13 atm-cu m/mole(SRC), using a fragment constant estimation method(2). Sulfanilic acid is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 1X10-9 mm Hg at 25 °C(SRC), determined from a fragment constant method(2). Based on results of the majority of eight separate laboratory determinations, it can be concluded that sulfanilic acid is not readily biodegradable(5). Sulfanilic acid, present at 100 mg/L, reached 8% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L in the Jap Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that sulfanilic acid is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 8.9X10-13 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). According to a classification scheme(4), an estimated BCF of 3(SRC), from a log Kow of -2.16(5) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Sulfanilic acid absorbs UV light at wavelengths >290 nm(6) and may be susceptible to direct photolysis in sunlit water(SRC). Based on results of the majority of eight separate laboratory determinations, it can be concluded that sulfanilic acid is not readily biodegradable(7). Sulfanilic acid, present at 100 mg/L, reached 8% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(8) which also indicates the compound is not readily biodegradable(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), sulfanilic acid, which has an estimated vapor pressure of 1X10-9 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely in the particulate phase in the ambient atmosphere. Particulate-phase sulfanilic acid may be removed from the air by wet or dry deposition(SRC). Sulfanilic acid absorbs UV light at wavelengths >290 nm(3), and therefore may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Structure chimique 2D PubChem pour le CAS 515-74-2
CAS 515-74-2PubChem CID 23664644

Sodium sulfanilate

Nom IUPAC
sodium 4-aminobenzenesulfonate
Formule moléculaire
C6H6NNaO3S
Masse moléculaire
195.17 g/mol
Masse exacte
194.99660851 Da
Surface polaire topologique
91,6 Ų
Donneurs de liaisons hydrogène
1
Accepteurs de liaisons hydrogène
4
Unités covalentes
2
Stéréocentres définis
0

Également connu sous le nom de

Sodium sulphanilate4-Amino-benzenesulfonic acid monosodium saltBenzenesulfonic acid, 4-amino-, monosodium saltEINECS 208-208-5Sulfanilic acid monosodium saltCCRIS 7446Sulfanilic Acid Sodium Salt4-Aminobenzenesulfonic acid, sodium salt
16 autres noms signalés
4-Aminobenzenesulfonic acid, monosodium salt9YJ2Q81720EC 208-208-5Benzenesulfonic acid, 4-amino-, sodium salt (1:1)4SulfoanilinNapSulfanilsaeure NaSulfanilsaure Na SalzRefChem:8878944Aminobenzol1sulfonsaeureNaSodium 4aminobenzenesulfonate4AminobenzolsulfonsaeureNaSalzAnilin4sulfonsaure NatriumsalzSODIUM SULFANILATE [INCI]4Aminobenzolsulfonsaure Natriumsalz4Aminobenzenesulfonic acid, sodium salt4Aminobenzenesulfonic acid, monosodium salt
Identifiants de bases de données externes

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Liens d’inventaire pour 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Ce que signifie l’annexe II pour 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products

4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).

Questions fréquentes

Oui. 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 121-57-3 / 515-74-2 est l’identifiant numérique unique attribué à 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products de l’annexe II

Cette page résume une fiche de l’annexe II pour 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez 4-Aminobenzenesulfonic acid (Sulfanilic acid) and its salts, when used as a substance in hair dye products côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II