Aller au contenu principal
Annexe II Entrée 1174 CMRModifiée 29 Oct 2010

Bis(2-chloroethyl) ether

Bis(2-chloroethyl) ether figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 1174
CMR

Détails de la fiche

Nom chimique

Bis(2-chloroethyl) ether

Informations réglementaires

Données clés

Annexe
Numéro d’entrée
1174

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 111-44-4
CAS 111-44-4PubChem CID 8115

Bis(2-chloroethyl) ether

Bis(2-chloroethyl)ether is an ether. — ChEBI

Nom IUPAC
1-chloro-2-(2-chloroethoxy)ethane
Formule moléculaire
C4H8Cl2O
Masse moléculaire
143.01 g/mol
Masse exacte
141.9952203 Da
XLogP3
1,3
Surface polaire topologique
9,2 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
1
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

2,2'-Dichlorodiethyl ether2-Chloroethyl etherBis(2-chloroethyl)etherChlorexDCEEChloroethyl etherDichloroetherClorex
16 autres noms signalés
Dichloroethyl etherBCEEDichloroethyl oxidesym-Dichloroethyl etherEther dichlore1,5-Dichloro-3-oxapentane2,2'-Dichlorethyl ether2,2'-Dichloroethyl etherDi(2-chloroethyl) etherOxyde de chlorethyleBis(chloro-2-ethyl) oxideEther, bis(2-chloroethyl)Dwuchlorodwuetylowy eter2,2'-Dicloroetiletere2,2'-DichloorethyletherRcra waste number U025
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8115

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Signs and Symptoms of Dichloroethyl Ether Exposure: Acute exposure to dichloroethyl ether may produce the following signs and symptoms: irritation of the eyes, skin, and mucous membranes, profuse tearing, coughing, retching, and vomiting. Contact with skin and eyes may cause burns. Respiratory signs may include irritation of the respiratory tract, which may progress to pulmonary edema.; Emergency Life-Support Procedures: Acute exposure to dichloroethyl ether may require decontamination and life support for the victims. Emergency personnel should wear protective clothing appropriate to the type and degree of contamination. Air-purifying or supplied-air respiratory equipment should also be worn, as necessary. Rescue vehicles should carry supplies such as plastic sheeting and disposable plastic bags to assist in preventing spread of contamination.; Inhalation Exposure:; 1. Move victims to fresh air. Emergency personnel should avoid self-exposure to dichloroethyl ether.; 2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer 100% humidi Source: CAMEO Chemicals
  • ERG2024, Guide 152 (Dichloroethyl ether): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • ERG2024, Guide 152 (2,2'-Dichlorodiethyl ether): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash - If this chemical contacts the skin, wash the contaminated skin with soap and water.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H300: Fatal if swallowed [Danger Acute toxicity, oral]; H310: Fatal in contact with skin [Danger Acute toxicity, dermal]; H330: Fatal if inhaled [Danger Acute toxicity, inhalation]; H351: Suspected of causing cancer [Warning Carcinogenicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P260, P262, P264, P270, P271, P280, P284, P301+P316, P302+P352, P304+P340, P316, P318, P320, P321, P330, P361+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (21.3%): Flammable liquid and vapor [Warning Flammable liquids]; H300+H310+H330 (25.6%): Fatal if swallowed, in contact with skin or if inhaled [Danger Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H300 (100%): Fatal if swallowed [Danger Acute toxicity, oral]; H310 (100%): Fatal in contact with skin [Danger Acute toxicity, dermal]; H330 (100%): Fatal if inhaled [Danger Acute toxicity, inhalation]; H351 (100%): Suspected of causing cancer [Warning Carcinogenicity] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P262, P264, P270, P271, P280, P284, P301+P316, P302+P352, P303+P361+P353, P304+P340, P316, P318, P320, P321, P330, P361+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 258 reports by companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H310: Fatal in contact with skin [Danger Acute toxicity, dermal] Source: NITE-CMC
  • Precautionary Statement Codes: P262, P264, P270, P280, P301+P316, P302+P352, P316, P321, P330, P361+P364, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H330: Fatal if inhaled [Danger Acute toxicity, inhalation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P262, P264, P264+P265, P270, P271, P280, P284, P301+P316, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P316, P318, P319, P320, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Health Effects: The principal acute effect of inhalation exposure to BCEE vapor is irritation and injury to the cells of the respiratory epithelium. BCEE vapors can cause loss of weight, nose irritation, severe injury to the lungs, and may lead to death. It might also cause cancer. (L183) Source: Toxin and Toxin Target Database (T3DB)
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Quantitative information on the kinetics and metabolism of BCEE /bis(2-chloroethyl) ether/... in humans is not available. ... Limited data show that radioactive BCEE administered to rats by inhalation or gavage is rapidly absorbed. ... BCEE is readily metabolized in rats. The principal metabolite is thiodiglycolic acid ... BCEE is eliminated quickly in both rats and rhesus monkeys. ... BCEE is acutely toxic by the oral, inhalation or dermal routes of exposure. ... Exposure of laboratory animals by inhalation to high single concentrations ... resulted in eye irritation as well as congestion, edema, and hemorrhage in the lungs. ... In general, positive results were obtained when ... tested for mutagenicity in vitro. ... /In one study/ there was a significant increase in the incidence of hepatomas (combined benign hepatomas and malignant tumors) compared to unexposed controls. ... Other limited studies in rats and mice using oral gavage, subcutaneous or intraperitoneal injection and skin painting failed to confirm these findings. ... BCEE was found to be irritating to the eyes and nasal passages of humans ... following short term exposure. No epidemiological studies on the effects of Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: BCEE is extremely meabolized, with thiodiglycolic acid (TDGA) being the principal endproduct. The pathway leading to TDGA formation is uncertain, but probably involves oxidative cleavage of the ether bond to yield chloroacetaldehyde and 2-chloroethanol. (L183) Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: A BCF of 0.4 to 1.3 in carp(1) and a BCF of 11 in bluegills exposed to bis(2-chloroethyl) ether for 14 days(2) was observed. According to a classification scheme(3), these BCF values suggest that the potential for bioconcentration in aquatic organisms is low. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 120(SRC), determined from a log Kow of 1.29(2) and a regression-derived equation(3), indicates that bis(2-chloroethyl) ether is expected to have high mobility in soil(SRC). Volatilization of bis(2-chloroethyl) ether from moist soil surfaces is expected to be important(SRC) given an estimated Henry's Law constant of 2.9X10-5 atm-cu m/mole(SRC), calculated from its vapor pressure(4) and water solubility(5). In a 140 cm long column containing Lincoln fine sand collected in Ada, OK, 86% of the applied bis(2-chloroethyl) ether reached 140 cm, indicating minimal adsorption to this soil(6). The potential for volatilization of bis(2-chloroethyl) ether from dry soil surfaces may exist(SRC) based on a vapor pressure of 1.55 mm Hg(4). No data concerning the hydrolysis of bis(2-chloroethyl) ether in soil were available. The hydrolysis rate constant for bis(2-chloroethyl) ether in water was determined to be 2.6X10-5/hour under neutral conditions; this corresponds to a half-life at pH 7 and 25 °C of 3 years(7). Bis(2-chloroethyl) ether may be resistant to biodegradation under aerobic conditions in environmental medi Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 120(SRC), determined from a log Kow of 1.29(2) and a regression-derived equation(3), indicates that bis(2-chloroethyl) ether is not expected to adsorb to suspended solids and sediment in water(SRC). Bis(2-chloroethyl) ether is expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 2.9X10-5 atm-cu m/mole(SRC), calculated from its vapor pressure(4) and water solubility(5). Estimated volatilization half-lives for a model river and model lake are 40 hours and 16 days, respectively(3,SRC). According to a classification scheme(6), a BCF of 0.4 to 1.3(7) suggests the potential for bioconcentration in aquatic organisms is low(SRC). In one study, bis(2-chloroethyl) ether showed 50% biodegradation after 30 days when incubated with Ohio River water; acclimation appears to be important(8). Bis(2-chloroethyl) ether may be resistant to biodegradation under aerobic conditions in environmental media based upon screening test data from studies using activated sludge(7,SRC). In general, many ethers are known to be resistant to biodegradation(9). The hydrolysis rate constant for bis(2 Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), bis(2-chloroethyl) ether, which has a vapor pressure of 1.55 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase bis(2-chloroethyl) ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 5 days(3,SRC). Direct photolysis in the atmosphere is not expected to be a major significant degradation process since no functional groups are present in bis(2-chloroethyl) ether that would lead to absorption of sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Intermediate; Cleaning agent; Corrosion inhibitor; Not Known or Reasonably Ascertainable; Surfactant (surface active agent); Solvent Source: EPA Chemical Data Reporting (CDR)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 1175
Fiche voisine dans la même annexe

Phenol

CAS: 108-95-2
EC: 203-632-7
Annexe II 1178
Fiche voisine dans la même annexe

Propargite (ISO)

CAS: 2312-35-8
EC: 219-006-1
Annexe II 1180
Fiche voisine dans la même annexe

Molinate (ISO)

CAS: 2212-67-1
EC: 218-661-0
Annexe II 1167
Fiche voisine dans la même annexe

Naphthalene

CAS: 91-20-3
EC: 202-049-5

Ce que signifie l’annexe II pour Bis(2-chloroethyl) ether

Bis(2-chloroethyl) ether figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).
  • Cette substance a une classification CMR. Examinez le tableau CMR ci-dessus et vérifiez le statut actuel dans les annexes II/III avant toute utilisation.

Questions fréquentes

Oui. Bis(2-chloroethyl) ether figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 111-44-4 est l’identifiant numérique unique attribué à Bis(2-chloroethyl) ether par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Bis(2-chloroethyl) ether a une classification CMR (cancérogène, mutagène ou toxique pour la reproduction) en vertu du règlement CLP de l’UE. Selon l’article 15 du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques, les substances CMR des catégories 1A ou 1B sont interdites dans les cosmétiques, sauf autorisation expresse. Les substances CMR de catégorie 2 ne peuvent être utilisées que si le SCCS les a jugées sûres. Vérifiez toujours le statut actuel dans les annexes et les éventuelles dérogations applicables avant toute utilisation.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche Bis(2-chloroethyl) ether de l’annexe II

Cette page résume une fiche de l’annexe II pour Bis(2-chloroethyl) ether à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour Bis(2-chloroethyl) ether, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter Bis(2-chloroethyl) ether et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez Bis(2-chloroethyl) ether côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II