Metaldehyde (ISO); 2,4,6,8-tetramethyl- 1,3,5,7-tetraoxacyclooctane
Listed by the Saudi Food and Drug Authority as prohibited in cosmetic products.
Regulatorische Entscheidung und vollständige Bedingungen
- Status
- Prohibited
- Rechtsrolle
- Binding rule
- Regulatorische Zusammenfassung
- Listed by the Saudi Food and Drug Authority as prohibited in cosmetic products.
- Bedingungen und Beschränkungen
- A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Öffnen Sie die zitierte Quelle und wenden Sie die unten genannten marktweiten Anforderungen an.
Stoffidentität
- Name in der amtlichen Quelle
- Metaldehyde (ISO); 2,4,6,8-tetramethyl- 1,3,5,7-tetraoxacyclooctane
- CAS
- 108-62-3
- EC
- Not supplied in this source row
- Identitätszuordnung
- standalone:official_sfda_record
Marktübergreifende Übersicht zu dieser Identität
Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.
European Union
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenGreat Britain
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenNew Zealand
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenASEAN
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenSaudi Arabia
Aktueller Eintrag1 verknüpfter Eintrag
Unterstützenden Eintrag öffnen
Verifizierte Chemie für CAS 108-62-3
Metaldehyde
Metaldehyde is a white-colored crystalline solid. It is insoluble in water. It is highly flammable and when ignited will give off irritating fumes. It may be toxic by ingestion and is very irritating to skin and eyes. It is used to make other chemicals. — CAMEO Chemicals
- IUPAC-Name
- 2,4,6,8-tetramethyl-1,3,5,7-tetraoxocane
- Summenformel
- C8H16O4
- Molekulargewicht
- 176.21 g/mol
- Exakte Masse
- 176.10485899 Da
- Monoisotopische Masse
- 176.10485899 Da
- XLogP3
- 1,1
- Topologische polare Oberfläche
- 36,9 Ų
- Molekulare Komplexität
- 91,0
- Formale Ladung
- 0
- Wasserstoffbrücken-Donoren
- 0
- Wasserstoffbrücken-Akzeptoren
- 4
- Drehbare Bindungen
- 0
- Schweratome
- 12
- Kovalente Einheiten
- 1
An PubChem gemeldete Namen und Synonyme
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:81931
- ChEMBL:CHEMBL2251334
- EPA DTXSID:DTXSID1034715
- PubMed:22901408
- PubMed:22859414
- PubMed:22474571
- PubMed:22471218
- PubMed:22322291
- PubMed:22272399
- PubMed:22215313
- PubMed:22164375
- PubMed:22069667
- PubMed:21965242
- PubMed:21852306
- PubMed:21843803
Erweiterte Strukturstatistik
- Definierte Atom-Stereozentren
- 0
- Nicht definierte Atom-Stereozentren
- 0
- Definierte Bindungs-Stereozentren
- 0
- Nicht definierte Bindungs-Stereozentren
- 0
- 3D-Pharmakophormerkmale
- 4
- 3D-Ringe
- 0
- 3D-Hydrophobe
- 0
- 3D-Akzeptormerkmale
- 4
- 3D-Donormerkmale
- 0
- 3D-Anionenzentren
- 0
- 3D-Kationenzentren
- 0
- 3D-Konformere
- 3
- Effektive 3D-Rotoren
- 1,6
Maschinenlesbare Strukturkennungen
- SMILES
CC1OC(OC(OC(O1)C)C)C- InChI
InChI=1S/C8H16O4/c1-5-9-6(2)11-8(4)12-7(3)10-5/h5-8H,1-4H3- InChIKey
GKKDCARASOJPNG-UHFFFAOYSA-N
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 115 °C (sublimes) Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Crystalline powder Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Crystals Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.27 at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 97 °F (36 °C) (closed cup) Quelle: Hazardous Substances Data Bank (HSDB)
- LogP: log Kow = 0.12 Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: 246.2 °C (closed capillary) Quelle: Hazardous Substances Data Bank (HSDB)
- Odor: Menthol odor Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Metaldehyde is a white-colored crystalline solid. It is insoluble in water. It is highly flammable and when ignited will give off irritating fumes. It may be toxic by ingestion and is very irritating to skin and eyes. It is used to make other chemicals. Quelle: CAMEO Chemicals
- Physical Description: Solid; [IUCLID] Formulated as granules, pellets, mini-pellets, meal, paste, and liquid; [Reference #1] Colorless or white solid; [Reference #2] White odorless powder; [Alfa Aesar MSDS] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Solubility: In water, 200 mg/L at 17 °C /Polymer/ Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Moderately soluble in water, fairly soluble in toluene, readily soluble in methanol, very soluble in benzene and chloroform, insoluble in acetic acid, and slightly soluble in ethanol. Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Insoluble in water, acetone, acetic acid, and carbon disulfide. Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: In toluene 530 mg/L at 20 °C, in methanol 1730 mg/L at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, 222 mg/L at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: Vapor pressure is negligible at room temperature. Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: 6.6X10+3 mPa (5.0X10-2 mm Hg) at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Carcinogen Classification: No indication of carcinogenicity to humans (not listed by IARC). Quelle: Toxin and Toxin Target Database (T3DB)
- Exposure Routes: Oral (L1782) ; inhalation (L1782) ; dermal (L1782) Quelle: Toxin and Toxin Target Database (T3DB)
- First Aid: Excerpt from ERG Guide 133 [Flammable Solids]:; Refer to the "General First Aid" section. Specific First Aid: Removal of solidified molten material from skin requires medical assistance. (ERG, 2024) Quelle: CAMEO Chemicals
- ERG2024, Guide 133 (Metaldehyde): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
- Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H361f: Suspected of damaging fertility [Warning Reproductive toxicity]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P210, P240, P241, P264, P270, P273, P280, P301+P316, P318, P321, P330, P370+P378, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H228 (100%): Flammable solid [Danger Flammable solids]; H301 (77.2%): Toxic if swallowed [Danger Acute toxicity, oral]; H312 (17.2%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H361 (11.9%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H361f (44%): Suspected of damaging fertility [Warning Reproductive toxicity]; H412 (68.2%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P210, P240, P241, P264, P270, P273, P280, P301+P316, P302+P352, P317, P318, P321, P330, P362+P364, P370+P378, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 302 reports by companies from 13 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: Not Classified Quelle: NITE-CMC
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- Precautionary Statement Codes: P210, P240, P241, P260, P264, P264+P265, P270, P280, P301+P316, P305+P351+P338, P308+P316, P319, P321, P330, P337+P317, P370+P378, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Danger Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
- Health Effects: Metaldehyde intoxicatin leads to central nervous system depression, and liver and kidney injury. Death from respiratory failure can occur within a few hours of exposure. (L1787) Quelle: Toxin and Toxin Target Database (T3DB)
- NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Quelle: Hazardous Substances Data Bank (HSDB)
- Toxicity Summary: The toxicologically active substance in metaldehyde intoxication is mainly the degradation product acetaldehyde; other toxic products are probably also formed. Acetaldehyde acts as a releasing factor for 5-hydroxytryptamine (5-HT) and noradrenaline (NA). It also competitively inhibits biogenic amine oxidation which, in turn, decreases 5-hydroxyindoleacetic acid (5-HIAA), a metabolite of 5-HT by competitively inhibiting 5-HT-oxidation. Acetaldehyde also increases monoamine oxidase activity and decreases central serotonin levels. (L1782) Quelle: Toxin and Toxin Target Database (T3DB)
- Environmental Bioconcentration: An estimated BCF of 3.2 was calculated for metaldehyde(SRC), using a log Kow of 0.12(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), a measured Koc value of 240(2) indicates that metaldehyde is expected to have moderate mobility in soil(SRC). Volatilization of metaldehyde from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 5.2X10-5 atm-cu m/mole(SRC), derived from its vapor pressure, 5.0X10-2 mm Hg(2), and water solubility, 2.22X10+2 mg/L(2). Metaldehyde is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(2). The results of a laboratory volatility study suggest that volatilization losses from soil surfaces will be minor(3). In a field study, 6% metaldehyde pellets were broadcast at the rate of 4 kg product/ha in a rice paddy ecosystem(4). Paddy soil samples collected 3 to 14 days after application had metaldehyde residue concentrations ranging from 0.053 to 0.127 mg/kg, reaching a peak at 0.127 mg/kg 14 days after application(4). Metaldehyde residue was below the minimum detection limit of 0.016 mg/kg 22 days after application(4). A reported half-life of approximately 2 months for metaldehyde in soil(3) suggests that biodegradation is not an important environ Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), a measured Koc value of 240(2) indicates that metaldehyde is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 5.2X10-5 atm-cu m/mole(SRC), derived from its vapor pressure, 5.0X10-2 mm Hg(2), and water solubility, 2.22X10+2 mg/L(2). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 26 hours and 12 days, respectively(SRC). In a field study, 6% metaldehyde pellets were broadcast at the rate of 4 kg product/ha in a rice paddy ecosystem(4). Paddy water samples collected 1 to 3 days after application had metaldehyde residue concentrations of 1.58 to 1.47 mg/L(4). Residues could be detected only up to 9 days after application, with its degradation pattern following pseudo first-order kinetics showing a half-life of 0.27 days(4). According to a classification scheme(5), an estimated BCF of 3.2(SRC), from its log Kow(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low. Utilizing the Japanese MITI te Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), metaldehyde, which has a vapor pressure of 5.0X10-2 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase metaldehyde is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 13 hours(SRC), calculated from its rate constant of 2.9X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Metaldehyde does not contain chromophores that absorb at wavelengths >290 nm(4) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Sources/Uses: Used for control of snails in seed crops, turf, ornamentals, berries, citrus, vegetables, and other crops; [Reference #1] Used for synthesis in the chemical industry, as odor agent, and as pesticide; [IUCLID] Used as molluscicide, solid fuel for small heaters (alcohol replacement), and fire starter; [Reference #2] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Farming (Pesticides) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: For metaldehyde (USEPA/OPP Pesticide Code: 053001) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Metaldehyde is a molluscicide used to control snails and slugs on a wide variety of sites, including turf, ornamentals, berries, citrus, and vegetables. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: In compressed form as a fuel instead of alcohol; molluscicide. /Polymer/ Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Metaldehyde is used as a pesticide against slugs, snails, and other gastropods, it is also used in tablets as a solid fuel for small heaters, and as fire-starter. (L1782) Quelle: Toxin and Toxin Target Database (T3DB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Amtliche Quelle und Herkunft
- Registrierte Quelle
- Saudi SFDA prohibited and restricted ingredient lists
- Quellenverweis
- SFDA prohibited list, page 165, row 1
- Eintrags-ID der Quelle
prohibited-164-1- Quellenversion
- live-snapshot-2026-08-30
- Quellsprache
- English
- Übersetzungsstatus
- Original is English
- Stand geprüft
- 2026-08-30 05:18 UTC
- Validierungsmethode
- complete SFDA paginated HTML snapshot; strict page/row counts
- SHA-256
ceb6cc636e6b1f4b3013f88ce0297217b49d6194342c6ece5c03b1e04256d71a
Hinweise zum registrierten Datensatz
- Datensatzabdeckung
- Prohibited and restricted substances with CAS, EC and conditions
- Hinweis zur Behörde
- Official SFDA dated lists; version and hash each release
Wie dieser Eintrag in den Marktdatensatz passt
Statusverteilung
Bedingungstext ist bei 0 von 2090 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.
Saudi Arabia Marktkontext
Complete official list index
Abdeckungsversion: SFDA live prohibited/restricted lists, snapshot 30 August 2026
Every page and entry in the public SFDA prohibited and restricted ingredient indexes; restricted detail pages remain the source for conditions.
Verifizierungs-Checkliste
- Search names and CAS across both SFDA lists.
- Open the cited restricted-entry detail and apply every condition.
- Check current SFDA/GSO technical regulations and updates.
- Complete eCosma notification, label and responsible-party requirements.
Amtliche Marktquellen
- Saudi SFDA prohibited and restricted ingredient listsOfficial SFDA dated lists; version and hash each release
Verifizierungsablauf und Vollständigkeit des Eintrags
Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden
- Bestätigen Sie, dass „Metaldehyde (ISO); 2,4,6,8-tetramethyl- 1,3,5,7-tetraoxacyclooctane“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
- Search names and CAS across both SFDA lists.
- Open the cited restricted-entry detail and apply every condition.
- Check current SFDA/GSO technical regulations and updates.
- Complete eCosma notification, label and responsible-party requirements.
- Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.
In diesem Eintrag verfügbare Felder
- Amtlicher StoffnameVerfügbar
- CASVerfügbar
- ECNicht angegeben
- Gesonderter BedingungstextIn der Quellzeile nicht vorhanden
- Datum des InkrafttretensNicht angegeben
- Snapshot-Hash und MethodeVerfügbar
Fragen, die diese Seite beantwortet
Dauerhafte Zitierweise
Metaldehyde (ISO); 2,4,6,8-tetramethyl- 1,3,5,7-tetraoxacyclooctane. SFDA prohibited list, page 165, row 1. Saudi Arabia. Source version live-snapshot-2026-08-30. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/sa/records/11220/
Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.
Auslegung und Grenzen für Saudi Arabia
This official record identifies the substance as prohibited for cosmetic use in the stated market scope.
Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.
Wie die Rechtsrolle auszulegen ist
The cited row forms part of a binding rule or legally incorporated list for this market.
Belege auf dieser Seite
- Erfasstes Ergebnis: Prohibited
- Rechtsrolle: Binding rule
- Quellenversion: live-snapshot-2026-08-30
Was es nicht beweist
No list match is not permission; Gulf/SFDA product, claim, notification and technical requirements still apply.
Weitere maßgebliche Stoffrecherche
Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Diese Identität bei der Quelle recherchierenFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Diese Identität bei der Quelle recherchierenILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Diese Identität bei der Quelle recherchierenJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Diese Identität bei der Quelle recherchierenNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Diese Identität bei der Quelle recherchierenOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Diese Identität bei der Quelle recherchierenUS EPA CompTox CTX APIs
Für den Import ist ein API-Schlüssel erforderlichDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Diese Identität bei der Quelle recherchieren