Zum Hauptinhalt springen
ProhibitedBinding ruleGBOriginal is EnglishImport aus amtlicher Quelle geprüft

Metaldehyde (ISO); 2,4,6,8-tetramethyl- 1,3,5,7-tetraoxacyclooctane

The consolidated GB Cosmetics Regulation lists this record in Annex II.

Regulatorische Entscheidung und vollständige Bedingungen

Status
Prohibited
Rechtsrolle
Binding rule
Regulatorische Zusammenfassung
The consolidated GB Cosmetics Regulation lists this record in Annex II.
Bedingungen und Beschränkungen
A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Öffnen Sie die zitierte Quelle und wenden Sie die unten genannten marktweiten Anforderungen an.

Stoffidentität

Name in der amtlichen Quelle
Metaldehyde (ISO); 2,4,6,8-tetramethyl- 1,3,5,7-tetraoxacyclooctane
CAS
108-62-3
EC
203-600-2
Identitätszuordnung
standalone:official_gb_annex

Marktübergreifende Übersicht zu dieser Identität

Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.

5 Marktdatensätze
Chemische 2D-Struktur aus PubChem für CAS 108-62-3
CAS 108-62-3PubChem CID 61021

Verifizierte Chemie für CAS 108-62-3

Metaldehyde

Metaldehyde is a white-colored crystalline solid. It is insoluble in water. It is highly flammable and when ignited will give off irritating fumes. It may be toxic by ingestion and is very irritating to skin and eyes. It is used to make other chemicals. — CAMEO Chemicals

IUPAC-Name
2,4,6,8-tetramethyl-1,3,5,7-tetraoxocane
Summenformel
C8H16O4
Molekulargewicht
176.21 g/mol
Exakte Masse
176.10485899 Da
Monoisotopische Masse
176.10485899 Da
XLogP3
1,1
Topologische polare Oberfläche
36,9 Ų
Molekulare Komplexität
91,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
4
Drehbare Bindungen
0
Schweratome
12
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

MetacetaldehydeSlug-ToxCekumetaAcetaldehyde, tetramerAriotoxHalizanMetason1,3,5,7-Tetroxocane, 2,4,6,8-tetramethyl-
16 weitere gemeldete Namen
MetaldehydCorry's Slug DeathMetaldeideAcetaldehyde Tetramer2,4,6,8-Tetramethyl-1,3,5,7-tetraoxacyclooctane2,4,6,8-Tetramethyl-1,3,5,7-tetroxocaneSlugfestr-2,c-4,c-6,c-8-Tetramethyl-1,3,5,7-tetroxocane4CI033VJYGCHEBI:81931AntimilaceSchneckokornLimovetNamekilLimaxSlugit
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
4
3D-Ringe
0
3D-Hydrophobe
0
3D-Akzeptormerkmale
4
3D-Donormerkmale
0
3D-Anionenzentren
0
3D-Kationenzentren
0
3D-Konformere
3
Effektive 3D-Rotoren
1,6
Maschinenlesbare Strukturkennungen
SMILES
CC1OC(OC(OC(O1)C)C)C
InChI
InChI=1S/C8H16O4/c1-5-9-6(2)11-8(4)12-7(3)10-5/h5-8H,1-4H3
InChIKey
GKKDCARASOJPNG-UHFFFAOYSA-N

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer61021

Attributed physical-property, hazard, environmental and use annotations.

  • Physical Description: Metaldehyde is a white-colored crystalline solid. It is insoluble in water. It is highly flammable and when ignited will give off irritating fumes. It may be toxic by ingestion and is very irritating to skin and eyes. It is used to make other chemicals. Quelle: CAMEO Chemicals
  • Physical Description: Solid; [IUCLID] Formulated as granules, pellets, mini-pellets, meal, paste, and liquid; [Reference #1] Colorless or white solid; [Reference #2] White odorless powder; [Alfa Aesar MSDS] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • First Aid: Excerpt from ERG Guide 133 [Flammable Solids]:; Refer to the "General First Aid" section. Specific First Aid: Removal of solidified molten material from skin requires medical assistance. (ERG, 2024) Quelle: CAMEO Chemicals
  • ERG2024, Guide 133 (Metaldehyde): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H361f: Suspected of damaging fertility [Warning Reproductive toxicity]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P240, P241, P264, P270, P273, P280, P301+P316, P318, P321, P330, P370+P378, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H228 (100%): Flammable solid [Danger Flammable solids]; H301 (77.2%): Toxic if swallowed [Danger Acute toxicity, oral]; H312 (17.2%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H361 (11.9%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H361f (44%): Suspected of damaging fertility [Warning Reproductive toxicity]; H412 (68.2%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P240, P241, P264, P270, P273, P280, P301+P316, P302+P352, P317, P318, P321, P330, P362+P364, P370+P378, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 302 reports by companies from 13 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: Not Classified Quelle: NITE-CMC
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P210, P240, P241, P260, P264, P264+P265, P270, P280, P301+P316, P305+P351+P338, P308+P316, P319, P321, P330, P337+P317, P370+P378, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Signal: Danger Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • Health Effects: Metaldehyde intoxicatin leads to central nervous system depression, and liver and kidney injury. Death from respiratory failure can occur within a few hours of exposure. (L1787) Quelle: Toxin and Toxin Target Database (T3DB)
  • NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Quelle: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: The toxicologically active substance in metaldehyde intoxication is mainly the degradation product acetaldehyde; other toxic products are probably also formed. Acetaldehyde acts as a releasing factor for 5-hydroxytryptamine (5-HT) and noradrenaline (NA). It also competitively inhibits biogenic amine oxidation which, in turn, decreases 5-hydroxyindoleacetic acid (5-HIAA), a metabolite of 5-HT by competitively inhibiting 5-HT-oxidation. Acetaldehyde also increases monoamine oxidase activity and decreases central serotonin levels. (L1782) Quelle: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: An estimated BCF of 3.2 was calculated for metaldehyde(SRC), using a log Kow of 0.12(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), a measured Koc value of 240(2) indicates that metaldehyde is expected to have moderate mobility in soil(SRC). Volatilization of metaldehyde from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 5.2X10-5 atm-cu m/mole(SRC), derived from its vapor pressure, 5.0X10-2 mm Hg(2), and water solubility, 2.22X10+2 mg/L(2). Metaldehyde is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(2). The results of a laboratory volatility study suggest that volatilization losses from soil surfaces will be minor(3). In a field study, 6% metaldehyde pellets were broadcast at the rate of 4 kg product/ha in a rice paddy ecosystem(4). Paddy soil samples collected 3 to 14 days after application had metaldehyde residue concentrations ranging from 0.053 to 0.127 mg/kg, reaching a peak at 0.127 mg/kg 14 days after application(4). Metaldehyde residue was below the minimum detection limit of 0.016 mg/kg 22 days after application(4). A reported half-life of approximately 2 months for metaldehyde in soil(3) suggests that biodegradation is not an important environ Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), a measured Koc value of 240(2) indicates that metaldehyde is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 5.2X10-5 atm-cu m/mole(SRC), derived from its vapor pressure, 5.0X10-2 mm Hg(2), and water solubility, 2.22X10+2 mg/L(2). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 26 hours and 12 days, respectively(SRC). In a field study, 6% metaldehyde pellets were broadcast at the rate of 4 kg product/ha in a rice paddy ecosystem(4). Paddy water samples collected 1 to 3 days after application had metaldehyde residue concentrations of 1.58 to 1.47 mg/L(4). Residues could be detected only up to 9 days after application, with its degradation pattern following pseudo first-order kinetics showing a half-life of 0.27 days(4). According to a classification scheme(5), an estimated BCF of 3.2(SRC), from its log Kow(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low. Utilizing the Japanese MITI te Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), metaldehyde, which has a vapor pressure of 5.0X10-2 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase metaldehyde is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 13 hours(SRC), calculated from its rate constant of 2.9X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Metaldehyde does not contain chromophores that absorb at wavelengths >290 nm(4) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Used for control of snails in seed crops, turf, ornamentals, berries, citrus, vegetables, and other crops; [Reference #1] Used for synthesis in the chemical industry, as odor agent, and as pesticide; [IUCLID] Used as molluscicide, solid fuel for small heaters (alcohol replacement), and fire starter; [Reference #2] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Farming (Pesticides) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For metaldehyde (USEPA/OPP Pesticide Code: 053001) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Metaldehyde is a molluscicide used to control snails and slugs on a wide variety of sites, including turf, ornamentals, berries, citrus, and vegetables. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: In compressed form as a fuel instead of alcohol; molluscicide. /Polymer/ Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Metaldehyde is used as a pesticide against slugs, snails, and other gastropods, it is also used in tablets as a solid fuel for small heaters, and as fire-starter. (L1782) Quelle: Toxin and Toxin Target Database (T3DB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Amtliche Quelle und Herkunft

Registrierte Quelle
Great Britain Cosmetics Regulation — consolidated Annexes II–VI and amendments
Quellenverweis
GB Cosmetics Regulation, Annex II, entry 1647
Eintrags-ID der Quelle
II-1647
Quellenversion
2026-08-15
Quellsprache
English
Übersetzungsstatus
Original is English
Datum des Inkrafttretens
2026-08-15
Quelle aktualisiert
2026-08-19
Stand geprüft
2026-08-30 04:51 UTC
Validierungsmethode
legislation.gov.uk XML table parse; {'II': 1758, 'III': 326, 'IV': 154, 'V': 57, 'VI': 34}
SHA-256
e3a386d950f54c6e7a7f9e784d1bd46e52de725137e89d5630709824475215d8

Hinweise zum registrierten Datensatz

Datensatzabdeckung
Complete consolidated GB Annexes II–VI, with later amendments versioned separately
Hinweis zur Behörde
Binding GB schedules and versioned amendments to retained Regulation 1223/2009; applies to England, Wales and Scotland, not Northern Ireland
Quellenlizenz
Open Government Licence v3.0 / Crown copyright
Namensnennung
Contains public sector information licensed under the Open Government Licence v3.0.

Wie dieser Eintrag in den Marktdatensatz passt

2329
aktuelle Einträge für Great Britain
1758
Einträge mit dem Status Prohibited
2329
Einträge aus dieser Quellenversion
2015
Markteinträge mit CAS-Identität

Statusverteilung

Bedingungstext ist bei 517 von 2329 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.

Great Britain Marktkontext

Complete consolidated annex dataset

Abdeckungsversion: GB retained Regulation 1223/2009 schedules, effective 15 August 2026

Current consolidated Annexes II–VI for England, Scotland and Wales.

Verifizierungs-Checkliste

  1. Confirm INCI/CAS/EC identity.
  2. Review every current GB Annex II–VI match.
  3. Check commencement dates and later statutory instruments.
  4. Verify SCPN, responsible-person, safety-report and labelling duties.

Amtliche Marktquellen

Verifizierungsablauf und Vollständigkeit des Eintrags

Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden

  1. Bestätigen Sie, dass „Metaldehyde (ISO); 2,4,6,8-tetramethyl- 1,3,5,7-tetraoxacyclooctane“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
  2. Confirm INCI/CAS/EC identity.
  3. Review every current GB Annex II–VI match.
  4. Check commencement dates and later statutory instruments.
  5. Verify SCPN, responsible-person, safety-report and labelling duties.
  6. Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.

In diesem Eintrag verfügbare Felder

  • Amtlicher StoffnameVerfügbar
  • CASVerfügbar
  • ECVerfügbar
  • Gesonderter BedingungstextIn der Quellzeile nicht vorhanden
  • Datum des InkrafttretensVerfügbar
  • Snapshot-Hash und MethodeVerfügbar

Fragen, die diese Seite beantwortet

This official record identifies the substance as prohibited for cosmetic use in the stated market scope. Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. No annex match is not approval and does not cover Northern Ireland, which follows the applicable EU framework.

Der Eintrag zitiert GB Cosmetics Regulation, Annex II, entry 1647, Quellenversion 2026-08-15. Die amtliche Quelle öffnen.

Nein. CAS hilft bei der Klärung der Identität, aber Rechtsordnungen können denselben Stoff unterschiedlich einstufen und unterschiedliche Produktbereiche, Grenzwerte, Warnhinweise und Übergangsfristen anwenden.

Dauerhafte Zitierweise

Metaldehyde (ISO); 2,4,6,8-tetramethyl- 1,3,5,7-tetraoxacyclooctane. GB Cosmetics Regulation, Annex II, entry 1647. Great Britain. Source version 2026-08-15. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/gb/records/6002/

Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.

Auslegung und Grenzen für Great Britain

This official record identifies the substance as prohibited for cosmetic use in the stated market scope.

Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

Wie die Rechtsrolle auszulegen ist

The cited row forms part of a binding rule or legally incorporated list for this market.

Belege auf dieser Seite

  • Erfasstes Ergebnis: Prohibited
  • Rechtsrolle: Binding rule
  • Quellenversion: 2026-08-15
  • Datum des Inkrafttretens: 2026-08-15

Was es nicht beweist

No annex match is not approval and does not cover Northern Ireland, which follows the applicable EU framework.

Weitere maßgebliche Stoffrecherche

Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Diese Identität bei der Quelle recherchieren

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Diese Identität bei der Quelle recherchieren

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Diese Identität bei der Quelle recherchieren

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Diese Identität bei der Quelle recherchieren

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Diese Identität bei der Quelle recherchieren

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Diese Identität bei der Quelle recherchieren

US EPA CompTox CTX APIs

Für den Import ist ein API-Schlüssel erforderlich

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Diese Identität bei der Quelle recherchieren