硼酸 — Boric acid (CAS No. 10043-35-3 / CAS No. 11113-50-1)
Boric acid (CAS No. 10043-35-3 / CAS No. 11113-50-1)
The NMPA binding 2021 catalogue prohibits this raw material in cosmetic formulas in China.
Regulatorische Entscheidung und vollständige Bedingungen
- Status
- Prohibited
- Rechtsrolle
- Binding rule
- Regulatorische Zusammenfassung
- The NMPA binding 2021 catalogue prohibits this raw material in cosmetic formulas in China.
- Bedingungen und Beschränkungen
Prohibited in cosmetic product formulas. Verify the cited Chinese source identity and any later NMPA amendment before use.
Stoffidentität
- Name in der amtlichen Quelle
- 硼酸 — Boric acid (CAS No. 10043-35-3 / CAS No. 11113-50-1)
- CAS
- 10043-35-3; 11113-50-1
- EC
- Not supplied in this source row
- Identitätszuordnung
- Exact CAS: 10043-35-3
- Verknüpfter Inhaltsstoff
- BORIC ACID
Verknüpfte CosIng-Identitätsdaten
Namen und Aliase
CosIng-Beschreibung: Boric acid
Erfasste kosmetische Funktion: ANTIMICROBIAL, BUFFERING, DENATURANT
Funktionsseiten:ANTIMICROBIAL, BUFFERING, DENATURANT
Das vollständige Inhaltsstoffprofil ansehenMarktübergreifende Übersicht zu dieser Identität
Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.
European Union
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenCanada
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenNew Zealand
2 verknüpfte Einträge
Unterstützenden Eintrag öffnenASEAN
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenChina
Aktueller Eintrag1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenJapan
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSouth Korea
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenAustralia
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenBrazil
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenIndia
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSaudi Arabia
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnen
Verifizierte Chemie für CAS 10043-35-3
Boric Acid
Boric acid is a member of boric acids. It has a role as an astringent. It is a conjugate acid of a dihydrogenborate. — ChEBI
- IUPAC-Name
- boric acid
- Summenformel
- BH3O3
- Molekulargewicht
- 61.84 g/mol
- Exakte Masse
- 62.0175241 Da
- Monoisotopische Masse
- 62.0175241 Da
- Topologische polare Oberfläche
- 60,7 Ų
- Molekulare Komplexität
- 8,0
- Formale Ladung
- 0
- Wasserstoffbrücken-Donoren
- 3
- Wasserstoffbrücken-Akzeptoren
- 3
- Drehbare Bindungen
- 0
- Schweratome
- 4
- Kovalente Einheiten
- 1
An PubChem gemeldete Namen und Synonyme
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:33118
- ChEMBL:CHEMBL42403
- EPA DTXSID:DTXSID1020194
- PubMed:40682482
- PubMed:38108610
- PubMed:37572183
- PubMed:37045926
- PubMed:35020164
- PubMed:34175401
- PubMed:33137424
- PubMed:32553615
- PubMed:32179172
- PubMed:31823256
- PubMed:31368021
- PubMed:30997025
Erweiterte Strukturstatistik
- Definierte Atom-Stereozentren
- 0
- Nicht definierte Atom-Stereozentren
- 0
- Definierte Bindungs-Stereozentren
- 0
- Nicht definierte Bindungs-Stereozentren
- 0
- 3D-Konformere
- 0
Maschinenlesbare Strukturkennungen
- SMILES
B(O)(O)O- InChI
InChI=1S/BH3O3/c2-1(3)4/h2-4H- InChIKey
KGBXLFKZBHKPEV-UHFFFAOYSA-N
Belege aus weiteren wissenschaftlichen Datenbanken
EMBL-EBI ChEBI
boric acid
- Rezeptur
- H3BO3
- Durchschnittsmasse
- 61.833 g/mol
- Monoisotopische Masse
- 62.01752 Da
- Formale Ladung
- 0
- boric acids — is a (CHEBI:59765)
- astringent — has role (CHEBI:74783)
- plastic heat stabilizer — has role (CHEBI:747338)
- astringent — has role (CHEBI:74783)
- plastic heat stabilizer — has role (CHEBI:747338)
- boric acids — is a (CHEBI:59765)
- dihydrogenborate — is conjugate acid of (CHEBI:29254)
Weitere kuratierte Namen
Querverweise aus dieser Quelle
- CAS: 10043-35-3 — KEGG COMPOUND
- CAS: 10043-35-3 — NIST Chemistry WebBook
- CAS: 10043-35-3 — ChemIDplus
- CAS: 11113-50-1 — ChemIDplus
- REGISTRY_NUMBER: 1585 — Gmelin
- MANUAL_X_REF: 1644 — MolBase
- MANUAL_X_REF: 2136 — PPDB
- MANUAL_X_REF: 2136 — BPDB
- MANUAL_X_REF: 3035 — DrugCentral
- MANUAL_X_REF: BO3 — PDBeChem
- MANUAL_X_REF: C12486 — KEGG COMPOUND
- MANUAL_X_REF: D01089 — KEGG DRUG
Zugeordnet durch: Exact CAS cross-reference in the ChEBI compound record. Quelle aktualisiert: 2025-09-18. Abgerufen: 2026-08-31. Quelleneintrag öffnen
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 572 °F at 760 mmHg (decomposes) (NTP, 1992) Quelle: CAMEO Chemicals
- Boiling Point: 300 Quelle: DrugBank
- Boiling Point: 572 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Color/Form: Colorless, transparent crystals or white granules or powder Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Colorless triclinic crystals Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: White waxy triclinic solid plates Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.435 at 68 °F (USCG, 1999) - Denser than water; will sink Quelle: CAMEO Chemicals
- Density: 1.5 g/cu cm Quelle: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 1.5 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 1.435 Quelle: Occupational Safety and Health Administration (OSHA)
- Density: 1.435 @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Dissociation Constants: Ka = 5.80X10-10 at 25 °C (pKa = 9.24) Quelle: Hazardous Substances Data Bank (HSDB)
- LogP: log Kow = 0.175 Quelle: Hazardous Substances Data Bank (HSDB)
- LogP: 0.18 Quelle: Human Metabolome Database (HMDB)
- LogP: -1.09 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 340 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Melting Point: 169 Quelle: DrugBank
- Melting Point: 171 °C Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Melting Point: 170.9 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: 171 °C Quelle: Human Metabolome Database (HMDB)
- Melting Point: 340 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Melting Point: 170.9 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Odor: Odorless Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Boric acid is an odorless white solid. Melting point 171 °C. Sinks and mixes with water. (USCG, 1999) Quelle: CAMEO Chemicals
- Physical Description: Dry Powder; Other Solid; Large Crystals; Dry Powder; Large Crystals; Liquid; Other Solid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Colourless, odourless, transparent crystals or white granules or powder; slightly unctuous to the touch; occurs in nature as the mineral sassolite Quelle: EU Food Improvement Agents
- Physical Description: Colorless crystals or white powder or granules; odorless; [Merck Index] White odorless powder; [Alfa Aesar MSDS] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Solid Quelle: Human Metabolome Database (HMDB)
- Physical Description: ODOURLESS COLOURLESS CRYSTALS OR WHITE POWDER. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: Odorless white solid. Quelle: Occupational Safety and Health Administration (OSHA)
- Refractive Index: Index of refraction: 1.337, 1.461, 1.462 Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 10 to 50 mg/mL at 66 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Solubility: Soluble in hot water, partially soluble in cold water Quelle: DrugBank
- Solubility: Slightly unctuous to touch; volatile with steam; solubility in water increased by hydrochloric, citric or tartaric acids Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility: in glycerol 17.5% at 25 °C; ethylene glycol 18.5% at 25 °C; in methanol 173.9 g/L at 25 °C; in ethanol 94.4 g/L at 25 °C; in acetone 0.6% at 25 °C; ethyl acetate 1.5% at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Water solubility: 2.52% at 0 °C; 3.49% at 10 °C; 4.72% at 20 °C; 6.23% at 30 °C; 8.08% at 40 °C; 10.27% at 50 °C; 12.97% at 60 °C; 15.75% at 70 °C; 19.10% at 80 °C; 23.27% at 90 °C; 27.53% at 100 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water is increased by hydrochloric acid Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, 5.0X10+4 mg/L at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 50 mg/mL at 25 °C Quelle: Human Metabolome Database (HMDB)
- Solubility: Solubility in water, g/100ml at 20 °C: 5.6 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 1.6X10-6 mm Hg at 25 °C (2.136X10-4 Pa); log P (in Pa) = 26.83 - 9094/T where T is deg K Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: Vapor pressure at 20 °C: negligible Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- pH: 3,8-4,8 (3,3 % aqueous solution) Quelle: EU Food Improvement Agents
- pH: pH = 5.1 (0.1 Molar) Quelle: Hazardous Substances Data Bank (HSDB)
- Substance: Boric Acid Quelle: NTP Technical Reports
- NTP Technical Report: TR-324: Toxicology and Carcinogenesis Studies of Boric Acid (CASRN 10043-35-3) in B6C3F1 Mice (Feed Studies) (1987 ) Quelle: NTP Technical Reports
- Peer Review Date: 03/26/86 Quelle: NTP Technical Reports
- Conclusion for Male Rat: Chemical Not Tested in Species/Sex Quelle: NTP Technical Reports
- Conclusion for Female Rat: Chemical Not Tested in Species/Sex Quelle: NTP Technical Reports
- Conclusion for Male Mice: No Evidence Quelle: NTP Technical Reports
- Conclusion for Female Mice: No Evidence Quelle: NTP Technical Reports
- Summary: Under the conditions of these 2--year feed studies, there was no evidence of carcinogenicity of boric acid at doses of 2,500 or 5,000 ppm for male or female B6C3F1 mice. Testicular atrophy and interstitial cell hyperplasia were observed in high dose male mice. The decrease in survival of dosed male mice may have reduced the sensitivity of this study. Quelle: NTP Technical Reports
- Carcinogen Classification: No indication of carcinogenicity to humans (not listed by IARC). Quelle: Toxin and Toxin Target Database (T3DB)
- Exposure Routes: The substance can be absorbed into the body by inhalation of dust and by ingestion. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
- Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 2123) of reports. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H360 (88.7%): May damage fertility or the unborn child [Danger Reproductive toxicity]; H360FD (11.2%): May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 2123 reports by companies from 49 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 2123 reports by companies.; There are 48 notifications provided by 2122 of 2123 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H360 (100%): May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 241 reports by companies from 5 notifications to the ECHA C&L Inventory.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard] Quelle: NITE-CMC
- Cosmetic Ingredient Review Conclusion: The Expert Panel concludes that Sodium Borate and Boric Acid, in concentrations less than or equal to 5 percent, are safe as cosmetic ingredients when used as currently recommended; however, cosmetic formulations containing free Sodium Borate or Boric Acid at this concentration should not be used on infant skin or injured skin. Note: In 2003, the CIR Expert Panel considered available new data on these ingredients and reaffirmed the above conclusion. Quelle: Cosmetic Ingredient Review (CIR)
- Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Quelle: Cosmetic Ingredient Review (CIR)
- Environmental Bioconcentration: Highly water soluble materials are unlikely to bioaccumulate to any significant degree, and borate species are all present essentially as undissociated boric acid at neutral pH(1). The octanol/water partition coefficient for boric acid has been measured as 0.175(1), indicating low bioaccumulation potential(1). Boron did not bioaccumulate in 47-day and 21-day exposure tests using oysters and sockeye salmon respectively(1). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: The pKa of boric acid is 9.24 at 25 °C(1), indicating that this compound will exist primarily in the undissociated form at an environmental pH range between pH 5 and pH 9, although the anion form will partially exist in alkaline soils(SRC). Adsorption of boron in soils depends on pH, organic content and types of clay and minerals in the soil(1). At acidic pH, boron exists in solutions in the form of undissociated boric acid; at alkaline pH, presence of borate ion occurs, which reaches maximum adsorption at pH 8.5-9(2). Field studies have observed boron to leach readily in soil(1); undissociated boric acid is transported in soil with little adsorption(2). Volatilization of boric acid from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.6X10-12 atm-cu m/mole(SRC), based upon its vapor pressure, 1.6X10-6 mm Hg(3), and water solubility, 5X10+4 mg/L(4). Boric acid is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure. No biotransformation processes have been reported for boron compounds, including boric acid(2). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: The pKa of boric acid is 9.24 at 25 °C(1), indicating that this compound will exist primarily in the undissociated form at an environmental pH range between 5 and 9, although the anion form will partially exist in alkaline waters(SRC). Boric acid leaches readily in soils(2) which indicates adsorption to suspended solids and sediment in water will not be an important fate process(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 2.6X10-12 atm-cu m/mole(SRC), derived from its vapor pressure, 1.6X10-6 mm Hg(4), and water solubility, 5X10+4 mg/L(5). However, evaporation of seawater itself is reported to be the biggest environmental contribution of boric acid to air(2). No biotransformation processes have been reported for boron compounds, including boric acid(2). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), boric acid, which has a vapor pressure of 1.6X10-6 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. One monitoring study found that approximately 90% of boric acid in the atmosphere is in gaseous form and 10% in particulate form(3). Vapor-phase boric acid is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 38 days(SRC), calculated from its rate constant of 4.2X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(4). Particulate-phase boric acid may be removed from the air by wet or dry deposition(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Chemical reaction regulator; pH regulating agent; Bleaching agent; Tanning agents not otherwise specified; Other; Lubricating agent; Anti-adhesive/cohesive; Adhesion/cohesion promoter; Anti-scaling agent; Viscosity modifiers; Soil amendments (fertilizers); Corrosion inhibitor; Not Known or Reasonably Ascertainable Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Processing aids not otherwise specified; Plating agent; Chemical reaction regulator; Bleaching agent; Fuel agents; pH regulating agent; Binder; Other; Lubricating agent; Anti-static agent; Chelating agent; Etching agent; Adhesion/cohesion promoter; Surface modifier; Dye; Flux agent; Flame retardant; Cleaning agent; Stabilizing agent; Not Known or Reasonably Ascertainable; Soil amendments (fertilizers) Quelle: EPA Chemical Data Reporting (CDR)
- Cosmetic Ingredient Review Link: CIR ingredient: Boric Acid Quelle: Cosmetic Ingredient Review (CIR)
- Sources/Uses: Used as an insecticide to kill ants and roaches, as a soldering flux, a flame retardant and weatherproofing agent; also used as an additive to dyes, nickeling baths, film developers, glass, enamels, soaps, paints, paper, adhesives, and steel; [HSDB] Used as a flux, an additive for heat-resistant borosilcate glass and glass fibers, a flame retardant for textile and insulation products, a fungicide for citrus fruits, an eye medicine, and a solute for nickel electroplating baths; Boric acid is formed by crystallizing a solution of hydrochloric acid or sulfuric acid and borax. [Hawley] Used for weatherproofing wood, as a preservative, in cosmetics, printing and dyeing, electric condensers, photography, and painting, for impregnating wicks and hardening steel, and to make cements, crockery, porcelain, borates, leather, carpets, hats, and artificial gems; Used therapeutically as an astringent and antiseptic and as a veterinary antibacterial and antifungal; [Merck Index] Registered US pesticide uses include insecticides (stomach poisons for ants, cockroaches, silverfish, and termites), fungicides (wood preservatives), and herbicides (desiccants, photosynthesis interrupters, and algae cont Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Steel Producing [Category: Industry]; Welding [Category: Weld]; Brazing [Category: Heat or Machine]; Electroplating [Category: Plate]; Textiles (Fiber & Fabric Manufacturing) [Category: Industry]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Applying Wood Preservatives [Category: Other]; Using Disinfectants or Biocides [Category: Clean]; Farming (Pesticides) [Category: Industry]; Sewer and Wastewater Treatment [Category: Industry]; Leather Tanning and Processing [Category: Industry]; Photographic Processing [Category: Other]; Cement Producing [Category: Industry]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Glass Manufacturing [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Both oil base and water base fracturing fluids are being used in the fracturing industry. Water base, which includes alcohol-water mixtures and low strength acids, make up the majority of treating fluids. The common chemicals added to these fluids are polymers for viscosity development, crosslinkers for viscosity enhancement, pH control chemicals, gel breakers for polymer degradation following the treatment, surfactants, clay stabilizers, alcohol, bactericides, fluid loss additives and friction reducer. /Hydraulic fracturing/ Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Hydraulic fracturing uses a specially blended liquid which is pumped into a well under extreme pressure causing cracks in rock formations underground. These cracks in the rock then allow oil and natural gas to flow, increasing resource production. ... Chemical Name: Boric acid; Chemical Purpose: Maintains fluid viscosity as temperature increases; Product Function: Crosslinker. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: For boric acid (USEPA/OPP Pesticide Code: 011001) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: For weatherproofing wood and fireproofing fabrics; as a preservative; manufacture of cements, crockery, porcelain, enamels, glass, borates, leather, carpets, hats, soaps, artificial gems; in nickeling baths; cosmetics; printing and dyeing, painting; photography; for impregnating wicks; electric condensers; hardening steel. Also used as insecticide for cockroaches and black carpet beetles. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for BORIC ACID (20 total), please visit the HSDB record page. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| EMBL-EBI ChEBI | Exakter Treffer | 2026-08-31 |
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Amtliche Quelle und Herkunft
- Registrierte Quelle
- China NMPA banned raw-material catalogues (2021)
- Quellenverweis
- NMPA 2021 Catalogue of Raw Materials Banned for Cosmetics, entry 1268
- Eintrags-ID der Quelle
chemical-1268- Quellenversion
- NMPA Announcement No. 74 of 2021, effective 2021-05-26
- Quellsprache
- Chinese with source English/Latin identity
- Übersetzungsstatus
- Official English translation · Englische Übersetzung
- Datum des Inkrafttretens
- 2021-05-26
- Quelle aktualisiert
- 2021-05-26
- Stand geprüft
- 2026-08-31 14:13 UTC
- Validierungsmethode
- pdfplumber tables; exact 1,284 + 109 row counts and contiguous source numbering
- SHA-256
8848aa3e0c7ac5e74f56fc27927336c4fc2e5bc80137da087c2ca9ba2d2c075e
Hinweise zum registrierten Datensatz
- Datensatzabdeckung
- All 1,284 banned raw materials and 109 banned plant/animal raw materials effective from 26 May 2021
- Hinweis zur Behörde
- Binding NMPA catalogues replacing Tables 1 and 2 of the 2015 Technical Specification
Wie dieser Eintrag in den Marktdatensatz passt
Statusverteilung
Bedingungstext ist bei 1393 von 1393 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.
China Marktkontext
Complete prohibited catalogues plus official-source workflow
Abdeckungsversion: NMPA 2021 banned catalogues plus dynamic IECIC List I/List II system current since 2025
All 1,284 banned raw materials and 109 banned plant/animal raw materials, plus the official workflow for the dynamic existing-ingredient inventory, other technical restrictions and new ingredients.
Verifizierungs-Checkliste
- Search the current NMPA IECIC List I and List II by Chinese name and identity.
- Check prohibited/restricted and positive lists in the current Safety and Technical Standards.
- Review technical purpose, use history and any monitoring period.
- Confirm Chinese labelling, safety assessment and filing/registration duties.
Amtliche Marktquellen
- China NMPA IECIC dynamic inventoryOfficial NMPA inventory, not a blanket permission or safety decision
- China draft mandatory cosmetic safety standardConsultation draft — not current law and not a substitute for the effective NMPA catalogues
- China NMPA banned raw-material catalogues (2021)Binding NMPA catalogues replacing Tables 1 and 2 of the 2015 Technical Specification
Verifizierungsablauf und Vollständigkeit des Eintrags
Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden
- Bestätigen Sie, dass „硼酸 — Boric acid (CAS No. 10043-35-3 / CAS No. 11113-50-1)“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
- Search the current NMPA IECIC List I and List II by Chinese name and identity.
- Check prohibited/restricted and positive lists in the current Safety and Technical Standards.
- Review technical purpose, use history and any monitoring period.
- Confirm Chinese labelling, safety assessment and filing/registration duties.
- Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.
In diesem Eintrag verfügbare Felder
- Amtlicher StoffnameVerfügbar
- CASVerfügbar
- ECNicht angegeben
- Gesonderter BedingungstextVerfügbar
- Datum des InkrafttretensVerfügbar
- Snapshot-Hash und MethodeVerfügbar
Fragen, die diese Seite beantwortet
Dauerhafte Zitierweise
硼酸 — Boric acid (CAS No. 10043-35-3 / CAS No. 11113-50-1). NMPA 2021 Catalogue of Raw Materials Banned for Cosmetics, entry 1268. China. Source version NMPA Announcement No. 74 of 2021, effective 2021-05-26. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/cn/records/12957/
Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.
Auslegung und Grenzen für China
This official record identifies the substance as prohibited for cosmetic use in the stated market scope.
Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.
Wie die Rechtsrolle auszulegen ist
The cited row forms part of a binding rule or legally incorporated list for this market.
Belege auf dieser Seite
- Erfasstes Ergebnis: Prohibited
- Rechtsrolle: Binding rule
- Quellenversion: NMPA Announcement No. 74 of 2021, effective 2021-05-26
- Datum des Inkrafttretens: 2021-05-26
Was es nicht beweist
IECIC listing is not blanket approval; absence may require the new cosmetic ingredient route, and restrictions are checked separately.
Weitere maßgebliche Stoffrecherche
Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Diese Identität bei der Quelle recherchierenFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Diese Identität bei der Quelle recherchierenILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Diese Identität bei der Quelle recherchierenJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Diese Identität bei der Quelle recherchierenNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Diese Identität bei der Quelle recherchierenOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Diese Identität bei der Quelle recherchierenUS EPA CompTox CTX APIs
Für den Import ist ein API-Schlüssel erforderlichDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Diese Identität bei der Quelle recherchieren