2-(2-Aminoethylamino)ethanol; (AEEA)
ASEAN Annex II lists this record among substances prohibited in cosmetic products. Member-state transition rules and deviations still require local verification.
Regulatorische Entscheidung und vollständige Bedingungen
- Status
- Prohibited
- Rechtsrolle
- Binding rule
- Regulatorische Zusammenfassung
- ASEAN Annex II lists this record among substances prohibited in cosmetic products. Member-state transition rules and deviations still require local verification.
- Bedingungen und Beschränkungen
- A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Öffnen Sie die zitierte Quelle und wenden Sie die unten genannten marktweiten Anforderungen an.
Stoffidentität
- Name in der amtlichen Quelle
- 2-(2-Aminoethylamino)ethanol; (AEEA)
- CAS
- 111-41-1
- EC
- 203-867-5
- Identitätszuordnung
- cas_number
- Verknüpfter Inhaltsstoff
- AMINOETHYLETHANOLAMINE
Verknüpfte CosIng-Identitätsdaten
Namen und Aliase
CosIng-Beschreibung: Ethanol, 2-[(2-aminoethyl)amino]-,Hydroxyethyl Ethylenediamine
Beschränkungshinweis aus dem EU-Verzeichnis: II/1471
Erfasste kosmetische Funktion: NOT REPORTED
Funktionsseiten:NOT REPORTED
Das vollständige Inhaltsstoffprofil ansehenMarktübergreifende Übersicht zu dieser Identität
Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.
European Union
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenGreat Britain
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenNew Zealand
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenASEAN
Aktueller Eintrag1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenIndia
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSaudi Arabia
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnen
Verifizierte Chemie für CAS 111-41-1
N-(2-Hydroxyethyl)ethylenediamine
Aminoethylethanolamine appears as a clear colorless liquid with an ammonia-like odor. Corrosive to tissue. Combustible, but may be difficult to ignite. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used to make other chemicals. — CAMEO Chemicals
- IUPAC-Name
- 2-(2-aminoethylamino)ethanol
- Summenformel
- C4H12N2O
- Molekulargewicht
- 104.15 g/mol
- Exakte Masse
- 104.094963011 Da
- Monoisotopische Masse
- 104.094963011 Da
- XLogP3
- -1,7
- Topologische polare Oberfläche
- 58,3 Ų
- Molekulare Komplexität
- 32,0
- Formale Ladung
- 0
- Wasserstoffbrücken-Donoren
- 3
- Wasserstoffbrücken-Akzeptoren
- 3
- Drehbare Bindungen
- 4
- Schweratome
- 7
- Kovalente Einheiten
- 1
An PubChem gemeldete Namen und Synonyme
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
- Definierte Atom-Stereozentren
- 0
- Nicht definierte Atom-Stereozentren
- 0
- Definierte Bindungs-Stereozentren
- 0
- Nicht definierte Bindungs-Stereozentren
- 0
- 3D-Pharmakophormerkmale
- 6
- 3D-Ringe
- 0
- 3D-Hydrophobe
- 0
- 3D-Akzeptormerkmale
- 1
- 3D-Donormerkmale
- 3
- 3D-Anionenzentren
- 0
- 3D-Kationenzentren
- 2
- 3D-Konformere
- 10
- Effektive 3D-Rotoren
- 4,0
Maschinenlesbare Strukturkennungen
- SMILES
C(CNCCO)N- InChI
InChI=1S/C4H12N2O/c5-1-2-6-3-4-7/h6-7H,1-5H2- InChIKey
LHIJANUOQQMGNT-UHFFFAOYSA-N
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 695 °F (USCG, 1999) Quelle: CAMEO Chemicals
- Autoignition Temperature: 695 °F (368 °C) Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 460 to 464 °F at 760 mmHg (NTP, 1992) Quelle: CAMEO Chemicals
- Boiling Point: 238-40 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: BP: 243.7 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 460-464 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Boiling Point: 243 °C @760 [mm Hg] Quelle: PAC Chemical Database, U.S. Department of Energy
- Color/Form: COLORLESS LIQ Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.028 at 77 °F (USCG, 1999) - Denser than water; will sink Quelle: CAMEO Chemicals
- Density: 1.0254 at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.028 Quelle: Occupational Safety and Health Administration (OSHA)
- Density: 1.03 @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Dissociation Constants: pKa= 7.21 Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 216 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Flash Point: 132 °C Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 132 °C (CLOSED CUP) Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 216 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Melting Point: -33 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Odor: MILD AMMONIACAL ODOR Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Aminoethylethanolamine appears as a clear colorless liquid with an ammonia-like odor. Corrosive to tissue. Combustible, but may be difficult to ignite. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used to make other chemicals. Quelle: CAMEO Chemicals
- Physical Description: CBI; Liquid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: A clear colorless liquid with an ammonia-like odor; [CAMEO] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: A clear colorless liquid with an ammonia-like odor. Quelle: Occupational Safety and Health Administration (OSHA)
- Refractive Index: INDEX OF REFRACTION: 1.4861 @ 20 °C/D Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: greater than or equal to 100 mg/mL at 70 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Solubility: VERY SOL IN WATER, ALCOHOL, ACETATE Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: less than 0.01 mmHg at 68 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Vapor Pressure: 0.000819 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 8.19X10-4 mm Hg at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: <0.01 mmHg Quelle: Occupational Safety and Health Administration (OSHA)
- Vapor Pressure: 0.01 [mm Hg] @20 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
- Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H360Df: May damage the unborn child; Suspected of damaging fertility [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P260, P261, P264, P272, P280, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P318, P321, P333+P317, P362+P364, P363, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H290 (13.6%): May be corrosive to metals [Warning Corrosive to Metals]; H314 (99.4%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317 (> 99.9%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H318 (19%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H335 (17.8%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H360 (99.8%): May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P234, P260, P261, P264, P264+P265, P271, P272, P280, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P318, P319, P321, P333+P317, P362+P364, P363, P390, P403+P233, P405, P406, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 3278 reports by companies from 41 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
- Precautionary Statement Codes: P273, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P233, P260, P261, P264, P264+P265, P271, P272, P273, P280, P284, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P318, P319, P321, P333+P317, P342+P316, P362+P364, P363, P403, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: Based upon an estimated log Kow of -1.39(1), the BCF for aminoethyl ethanolamine can be estimated to be 0.05 from a recommended regression-derived equation(2,SRC). This estimated BCF value indicates that bioconcentration in aquatic organisms is not important. Aminoethyl ethanolamine is miscible in water(3) which also indicates that bioconcentration is not important(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: The results of one biodegradation screening study have indicated that aminoethyl ethanolamine biodegrades readily(1); therefore, biodegradation may be an important transformation process in soil(SRC). Aminoethyl ethanolamine has a pKa of 7.21(2) that indicates it can exist in both the protonated and neutral forms in environmental media; neutral aminoethyl ethanolamine is expected to leach readily. However, the mobility of protonated aminoethyl ethanolamine in soil can not be predicted without additional experimental data(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: The results of one biodegradation screening study have indicated that aminoethyl ethanolamine biodegrades readily(1); therefore, biodegradation may be an important transformation process in water. Aquatic bioconcentration and volatilization are not expected to be important because of the high solubility of aminoethyl ethanolamine(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: Based upon a vapor pressure of 8.19X10-4 mm Hg at 25 °C(1), aminoethyl ethanolamine is expected to exist primarily in the vapor-phase in the ambient atmosphere(2,SRC). It will degrade rapidly in the atmosphere by the vapor-phase reaction with photochemically produced hydroxyl radicals with an estimated half-life of 3.3 hr(3,SRC). Aminoethyl ethanolamine is miscible with water(4), therefore, physical removal from air by wet deposition (dissolution in clouds, rainfall, etc) is possible(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Industry Uses: Intermediate; Corrosion inhibitor; pH regulating agent; Processing aids not otherwise specified; CBI Quelle: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as a chemical intermediate, textile finishing compound, and additive to oils in metal cutting; [HSDB] Occupational asthma reported in solderer and cable jointer; [Malo] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Metal Machining [Category: Heat or Machine]; Soldering [Category: Heat or Machine]; Semiconductor Manufacturing [Category: Industry]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: CHEM INT FOR CHELATING AGENTS, DETERGENTS & EMULSIFIERS, CORROSION INHIBITORS, MINING CHEMICALS, GASOLINE STABILIZERS, DYEING ASSISTANTS, MODIFYING AGENTS (TEXTILES), 2,4-D HERBICIDE SALTS, OILS USED IN TEXTILE PROCESSING, OILS USED IN METAL CUTTING, AND GAS PROCESSING CHEMICALS Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: TEXTILE FINISHING CMPD (ANTIFUMING AGENTS, DYESTUFFS, CATIONIC SURFACTANTS); RESINS, RUBBER PRODUCTS; INSECTICIDES, CERTAIN MEDICINALS Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Amtliche Quelle und Herkunft
- Registrierte Quelle
- ASEAN Cosmetic Directive annexes
- Quellenverweis
- ASEAN Annex II, reference 1471
- Eintrags-ID der Quelle
II-1471- Quellenversion
- 2026-1
- Quellsprache
- English
- Übersetzungsstatus
- Original is English
- Quelle aktualisiert
- 2026-06-22
- Stand geprüft
- 2026-08-30 04:44 UTC
- Validierungsmethode
- pdfplumber ruled-table extraction with per-annex reviewed counts
- SHA-256
ffad59f6c01a92c82042c54203ee14969425c2a82bd04c2f4012ff82513e69f1
Hinweise zum registrierten Datensatz
- Datensatzabdeckung
- Banned, restricted and positive-list substances under the harmonised ASEAN framework
- Hinweis zur Behörde
- Regional directive; member-state transitions and deviations still require local verification
Wie dieser Eintrag in den Marktdatensatz passt
Statusverteilung
Bedingungstext ist bei 462 von 2224 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.
ASEAN Marktkontext
Complete regional annex dataset
Abdeckungsversion: ASEAN Cosmetic Directive annexes 2026-1, 22 June 2026
Annexes II, III, IV, VI and VII covering prohibited, restricted and positive-list substances.
Verifizierungs-Checkliste
- Search all ACD annexes by name and identifiers.
- Apply product type, maximum level and warning conditions.
- Confirm the target member state's adoption and transition date.
- Complete the local notification and responsible-company requirements.
Amtliche Marktquellen
- ASEAN Cosmetic Directive annexesRegional directive; member-state transitions and deviations still require local verification
Verifizierungsablauf und Vollständigkeit des Eintrags
Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden
- Bestätigen Sie, dass „2-(2-Aminoethylamino)ethanol; (AEEA)“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
- Search all ACD annexes by name and identifiers.
- Apply product type, maximum level and warning conditions.
- Confirm the target member state's adoption and transition date.
- Complete the local notification and responsible-company requirements.
- Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.
In diesem Eintrag verfügbare Felder
- Amtlicher StoffnameVerfügbar
- CASVerfügbar
- ECVerfügbar
- Gesonderter BedingungstextIn der Quellzeile nicht vorhanden
- Datum des InkrafttretensNicht angegeben
- Snapshot-Hash und MethodeVerfügbar
Fragen, die diese Seite beantwortet
Dauerhafte Zitierweise
2-(2-Aminoethylamino)ethanol; (AEEA). ASEAN Annex II, reference 1471. ASEAN. Source version 2026-1. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/asean/records/3607/
Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.
Auslegung und Grenzen für ASEAN
This official record identifies the substance as prohibited for cosmetic use in the stated market scope.
Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.
Wie die Rechtsrolle auszulegen ist
The cited row forms part of a binding rule or legally incorporated list for this market.
Belege auf dieser Seite
- Erfasstes Ergebnis: Prohibited
- Rechtsrolle: Binding rule
- Quellenversion: 2026-1
Was es nicht beweist
Regional annex coverage does not replace member-state implementation dates, notifications or national deviations.
Weitere maßgebliche Stoffrecherche
Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Diese Identität bei der Quelle recherchierenFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Diese Identität bei der Quelle recherchierenILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Diese Identität bei der Quelle recherchierenJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Diese Identität bei der Quelle recherchierenNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Diese Identität bei der Quelle recherchierenOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Diese Identität bei der Quelle recherchierenUS EPA CompTox CTX APIs
Für den Import ist ein API-Schlüssel erforderlichDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Diese Identität bei der Quelle recherchieren