2-(2-Methoxyethoxy)ethanol
ASEAN Annex II lists this record among substances prohibited in cosmetic products. Member-state transition rules and deviations still require local verification.
Regulatorische Entscheidung und vollständige Bedingungen
- Status
- Prohibited
- Rechtsrolle
- Binding rule
- Regulatorische Zusammenfassung
- ASEAN Annex II lists this record among substances prohibited in cosmetic products. Member-state transition rules and deviations still require local verification.
- Bedingungen und Beschränkungen
- A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Öffnen Sie die zitierte Quelle und wenden Sie die unten genannten marktweiten Anforderungen an.
Stoffidentität
- Name in der amtlichen Quelle
- 2-(2-Methoxyethoxy)ethanol
- CAS
- 111-77-3
- EC
- 203-906-6
- Identitätszuordnung
- cas_number
- Verknüpfter Inhaltsstoff
- METHOXYDIGLYCOL
Verknüpfte CosIng-Identitätsdaten
Namen und Aliase
Beschränkungshinweis aus dem EU-Verzeichnis: II/1000
Erfasste kosmetische Funktion: FRAGRANCE, PERFUMING, SOLVENT, VISCOSITY CONTROLLING
Funktionsseiten:FRAGRANCE, PERFUMING, SOLVENT, VISCOSITY CONTROLLING
Das vollständige Inhaltsstoffprofil ansehenMarktübergreifende Übersicht zu dieser Identität
Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.
European Union
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenGreat Britain
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenCanada
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenNew Zealand
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenASEAN
Aktueller Eintrag1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenChina
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSouth Korea
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenBrazil
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenIndia
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSaudi Arabia
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnen
Verifizierte Chemie für CAS 111-77-3
Diethylene Glycol Monomethyl Ether
2-(2-methoxyethoxy)ethanol is a hydroxypolyether that is the monomethyl ether derivative of diethylene glycol. It has a role as a solvent and a teratogenic agent. It is a glycol ether, a diether and a hydroxypolyether. It is functionally related to a diethylene glycol. — ChEBI
- IUPAC-Name
- 2-(2-methoxyethoxy)ethanol
- Summenformel
- C5H12O3
- Molekulargewicht
- 120.15 g/mol
- Exakte Masse
- 120.078644241 Da
- Monoisotopische Masse
- 120.078644241 Da
- XLogP3
- -0,9
- Topologische polare Oberfläche
- 38,7 Ų
- Molekulare Komplexität
- 38,0
- Formale Ladung
- 0
- Wasserstoffbrücken-Donoren
- 1
- Wasserstoffbrücken-Akzeptoren
- 3
- Drehbare Bindungen
- 5
- Schweratome
- 8
- Kovalente Einheiten
- 1
An PubChem gemeldete Namen und Synonyme
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:44836
- ChEMBL:CHEMBL1235250
- EPA DTXSID:DTXSID3025049
- PubMed:22617435
- PubMed:21175159
- PubMed:21175157
- PubMed:20232803
- PubMed:20021058
- PubMed:19208476
- PubMed:17898459
- PubMed:16158298
- PubMed:15705492
- PubMed:15568825
- PubMed:14606891
- PubMed:12957179
Erweiterte Strukturstatistik
- Definierte Atom-Stereozentren
- 0
- Nicht definierte Atom-Stereozentren
- 0
- Definierte Bindungs-Stereozentren
- 0
- Nicht definierte Bindungs-Stereozentren
- 0
- 3D-Pharmakophormerkmale
- 4
- 3D-Ringe
- 0
- 3D-Hydrophobe
- 0
- 3D-Akzeptormerkmale
- 3
- 3D-Donormerkmale
- 1
- 3D-Anionenzentren
- 0
- 3D-Kationenzentren
- 0
- 3D-Konformere
- 10
- Effektive 3D-Rotoren
- 5,0
Maschinenlesbare Strukturkennungen
- SMILES
COCCOCCO- InChI
InChI=1S/C5H12O3/c1-7-4-5-8-3-2-6/h6H,2-5H2,1H3- InChIKey
SBASXUCJHJRPEV-UHFFFAOYSA-N
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 465 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Autoignition Temperature: 465 °F (240 °C) Quelle: Hazardous Substances Data Bank (HSDB)
- Autoignition Temperature: 215 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 381 °F at 760 mmHg (NTP, 1992) Quelle: CAMEO Chemicals
- Boiling Point: 193 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 193 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 381 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Boiling Point: 194.2 °C @760 [mm Hg] Quelle: PAC Chemical Database, U.S. Department of Energy
- Color/Form: Colorless liquid Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Water-white liquid Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Light yellow clear liquid Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.025 at 68 °F (USCG, 1999) - Denser than water; will sink Quelle: CAMEO Chemicals
- Density: 1.035 g/cu cm at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 1.04 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 1.025 Quelle: Occupational Safety and Health Administration (OSHA)
- Density: 1.04 @ 20°C Quelle: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 200 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Flash Point: 205 °F (96 °C) (open cup) Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 93 °C o.c. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Flash Point: 200 °F Quelle: Occupational Safety and Health Administration (OSHA)
- LogP: -1.14/-0.93 (calculated) Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -94 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Melting Point: Less than -84 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: -94 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Odor: Slight or pleasant smell /Solvents/ Quelle: Hazardous Substances Data Bank (HSDB)
- Odor: Ether-like odor Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Diethylene glycol monomethyl ether is a colorless liquid with a sweet odor. Floats and mixes with water. (USCG, 1999) Quelle: CAMEO Chemicals
- Physical Description: Liquid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless liquid; [Hawley] Hygroscopic; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS LIQUID. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: Colorless liquid with a sweet odor. Quelle: Occupational Safety and Health Administration (OSHA)
- Refractive Index: Index of refraction: 1.4264 at 27 °C/D Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: greater than or equal to 100 mg/mL at 66 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Solubility: Miscible /1X10+6 mg/L/ with water Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible with alcohol, glycerol, ether, acetone, dimethylformamide Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Very soluble in ethanol, ethyl ether Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: SOL IN ALL PROPN IN BENZENE Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: very good Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.2 mmHg at 68 °F ; 0.25 mmHg at 77 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Vapor Pressure: 0.25 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 0.25 mm Hg at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: Vapor pressure, Pa at 20 °C: 30 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.2 mmHg Quelle: Occupational Safety and Health Administration (OSHA)
- Vapor Pressure: 0.25 [mm Hg] @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Viscosity: 3.48 mPa.s (=cPa) at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by inhalation, through the skin and by ingestion. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
- Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H360D: May damage the unborn child [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Warning Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H312 (11%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H319 (11%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H361 (93.6%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P264+P265, P280, P302+P352, P305+P351+P338, P317, P318, P321, P337+P317, P362+P364, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 4012 reports by companies from 28 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P210, P261, P271, P280, P304+P340, P318, P319, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- GHS Hazard Statements: H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P260, P261, P271, P280, P304+P340, P318, P319, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol monomethyl ether(SRC), using an estimated log Kow of -1.18 and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol monomethyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol monomethyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.6X10-11 atm-cu m/mole(SRC), using a fragment constant estimation method(2). Diethylene glycol monomethyl ether is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.25 mm Hg at 25 °C(3). Aqueous screening test data suggest that biodegradation may be an important removal mechanism of diethylene glycol monomethyl ether in soil: theoretical BOD losses of 0, 21 and 66% when incubated at 20 °C for 5, 10 and 20 days, respectively, were reported(4). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol monomethyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 1.6X10-11 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). Diethylene glycol monomethyl ether is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). According to a classification scheme(4), an estimated BCF of 3(SRC), from an estimated log Kow of -1.18(2) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Aqueous screening test data suggest that biodegradation may be an important removal mechanism of diethylene glycol monomethyl ether: theoretical BOD losses of 0, 21 and 66% when incubated at 20 °C for 5, 10 and 20 days, respectively, were reported(5). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol monomethyl ether, which has a vapor pressure of 0.25 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol monomethyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 13 hours(SRC), calculated from its rate constant of 2.6X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Alcohols and ethers do not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, diethylene glycol monomethyl ether is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Fuel agents; Solvent; Intermediate; Hydraulic fluids Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Fuel agents; Solvent; Lubricating agent; Intermediate; Hydraulic fluids; Cleaning agent; Not Known or Reasonably Ascertainable Quelle: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as a solvent for wood stains, lacquers, inks, textile dye pastes, paints, waxes, dyes, and nitrocellulose resins; Also used in brake fluid, aviation fuel anti-icing additive, and inert ingredient in pesticides; [HSDB] Used as an intermediate; [Hawley] Not produced commercially in the EU; [Glycol Ethers Online] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Painting (Solvents) [Category: Paint]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: For diethylene glycol monomethyl ether (USEPA/OPP Pesticide Code: 042204) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: ... Inert (or occasionally active) ingredients in pesticide formulations applied to growing crops only. Use: Deactivator for formulations used before crop emerges from soil, stabilizer. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: This additive is for use in liquid hydrocarbon fuels including jet fuel, diesel fuels, marine fuels, and fuel oils for anti-microbial control of fungi and bacteria found in hydrocarbon fuel systems and/or for anti-icing control. /Phillips Fuel Additive 56 MB/ Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: De-icing additive for jet fuel. Solvent for paints, coatings and inks. Deactivator and stabilizer for pesticides. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for DIETHYLENE GLYCOL MONOMETHYL ETHER (10 total), please visit the HSDB record page. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Amtliche Quelle und Herkunft
- Registrierte Quelle
- ASEAN Cosmetic Directive annexes
- Quellenverweis
- ASEAN Annex II, reference 1000
- Eintrags-ID der Quelle
II-1000- Quellenversion
- 2026-1
- Quellsprache
- English
- Übersetzungsstatus
- Original is English
- Quelle aktualisiert
- 2026-06-22
- Stand geprüft
- 2026-08-30 04:44 UTC
- Validierungsmethode
- pdfplumber ruled-table extraction with per-annex reviewed counts
- SHA-256
ffad59f6c01a92c82042c54203ee14969425c2a82bd04c2f4012ff82513e69f1
Hinweise zum registrierten Datensatz
- Datensatzabdeckung
- Banned, restricted and positive-list substances under the harmonised ASEAN framework
- Hinweis zur Behörde
- Regional directive; member-state transitions and deviations still require local verification
Wie dieser Eintrag in den Marktdatensatz passt
Statusverteilung
Bedingungstext ist bei 462 von 2224 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.
ASEAN Marktkontext
Complete regional annex dataset
Abdeckungsversion: ASEAN Cosmetic Directive annexes 2026-1, 22 June 2026
Annexes II, III, IV, VI and VII covering prohibited, restricted and positive-list substances.
Verifizierungs-Checkliste
- Search all ACD annexes by name and identifiers.
- Apply product type, maximum level and warning conditions.
- Confirm the target member state's adoption and transition date.
- Complete the local notification and responsible-company requirements.
Amtliche Marktquellen
- ASEAN Cosmetic Directive annexesRegional directive; member-state transitions and deviations still require local verification
Verifizierungsablauf und Vollständigkeit des Eintrags
Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden
- Bestätigen Sie, dass „2-(2-Methoxyethoxy)ethanol“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
- Search all ACD annexes by name and identifiers.
- Apply product type, maximum level and warning conditions.
- Confirm the target member state's adoption and transition date.
- Complete the local notification and responsible-company requirements.
- Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.
In diesem Eintrag verfügbare Felder
- Amtlicher StoffnameVerfügbar
- CASVerfügbar
- ECVerfügbar
- Gesonderter BedingungstextIn der Quellzeile nicht vorhanden
- Datum des InkrafttretensNicht angegeben
- Snapshot-Hash und MethodeVerfügbar
Fragen, die diese Seite beantwortet
Dauerhafte Zitierweise
2-(2-Methoxyethoxy)ethanol. ASEAN Annex II, reference 1000. ASEAN. Source version 2026-1. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/asean/records/3141/
Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.
Auslegung und Grenzen für ASEAN
This official record identifies the substance as prohibited for cosmetic use in the stated market scope.
Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.
Wie die Rechtsrolle auszulegen ist
The cited row forms part of a binding rule or legally incorporated list for this market.
Belege auf dieser Seite
- Erfasstes Ergebnis: Prohibited
- Rechtsrolle: Binding rule
- Quellenversion: 2026-1
Was es nicht beweist
Regional annex coverage does not replace member-state implementation dates, notifications or national deviations.
Weitere maßgebliche Stoffrecherche
Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Diese Identität bei der Quelle recherchierenFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Diese Identität bei der Quelle recherchierenILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Diese Identität bei der Quelle recherchierenJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Diese Identität bei der Quelle recherchierenNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Diese Identität bei der Quelle recherchierenOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Diese Identität bei der Quelle recherchierenUS EPA CompTox CTX APIs
Für den Import ist ein API-Schlüssel erforderlichDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Diese Identität bei der Quelle recherchieren