Zum Hauptinhalt springen
Anhang II Eintrag 1000 CMRGeändert 17 Mai 2021

2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME)

2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) ist in Anhang II als verbotener Stoff für kosmetische Mittel aufgeführt, die in der EU in Verkehr gebracht werden.

Verbotener Stoff— Anhang II, EU-Verordnung (EG) Nr. 1223/2009
Eintrag: 1000
CMR

Eintragsdetails

Chemische Bezeichnung

2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME)

Chemische / IUPAC-Bezeichnung

2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME)

Regulatorische Informationen

Verordnung

(EC) 2009/1223

Alle Einträge anzeigen, die dieser Rechtsakt festgelegt hat

CMR

KategorieCarcinogenicMutagenicReprotoxic
Cat. 1B——✓

Kerndaten

Anhang
Eintragsnummer
1000

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 111-77-3
CAS 111-77-3PubChem CID 8134

Diethylene Glycol Monomethyl Ether

2-(2-methoxyethoxy)ethanol is a hydroxypolyether that is the monomethyl ether derivative of diethylene glycol. It has a role as a solvent and a teratogenic agent. It is a glycol ether, a diether and a hydroxypolyether. It is functionally related to a diethylene glycol. — ChEBI

IUPAC-Name
2-(2-methoxyethoxy)ethanol
Summenformel
C5H12O3
Molekulargewicht
120.15 g/mol
Exakte Masse
120.078644241 Da
XLogP3
-0,9
Topologische polare Oberfläche
38,7 Ų
Wasserstoffbrücken-Donoren
1
Wasserstoffbrücken-Akzeptoren
3
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

Methyl carbitolMethoxydiglycolMethyl digolDowanol DMDiethylene glycol methyl etherMECB3,6-Dioxa-1-heptanolEthanol, 2-(2-methoxyethoxy)-
16 weitere gemeldete Namen
Methyl dioxitolEktasolve DMDiglycol monomethyl etherDEGMEMethyl karbitolJeffersol DMDiethyleneglycol monomethyl etherDowanol 16Ethylene diglycol monomethyl etherEthanol, 2,2'-oxybis-, monomethyl etherbeta-Methoxy-beta'-hydroxydiethyl ether465DDJ8G8KNSC-2261CHEBI:448362-MEE cpdRefChem:133503
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer8134

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H360D: May damage the unborn child [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Warning Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H312 (11%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H319 (11%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H361 (93.6%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P264+P265, P280, P302+P352, P305+P351+P338, P317, P318, P321, P337+P317, P362+P364, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 4012 reports by companies from 28 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P261, P271, P280, P304+P340, P318, P319, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P271, P280, P304+P340, P318, P319, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol monomethyl ether(SRC), using an estimated log Kow of -1.18 and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol monomethyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol monomethyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.6X10-11 atm-cu m/mole(SRC), using a fragment constant estimation method(2). Diethylene glycol monomethyl ether is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.25 mm Hg at 25 °C(3). Aqueous screening test data suggest that biodegradation may be an important removal mechanism of diethylene glycol monomethyl ether in soil: theoretical BOD losses of 0, 21 and 66% when incubated at 20 °C for 5, 10 and 20 days, respectively, were reported(4). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol monomethyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 1.6X10-11 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). Diethylene glycol monomethyl ether is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). According to a classification scheme(4), an estimated BCF of 3(SRC), from an estimated log Kow of -1.18(2) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Aqueous screening test data suggest that biodegradation may be an important removal mechanism of diethylene glycol monomethyl ether: theoretical BOD losses of 0, 21 and 66% when incubated at 20 °C for 5, 10 and 20 days, respectively, were reported(5). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol monomethyl ether, which has a vapor pressure of 0.25 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol monomethyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 13 hours(SRC), calculated from its rate constant of 2.6X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Alcohols and ethers do not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, diethylene glycol monomethyl ether is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Fuel agents; Solvent; Lubricating agent; Intermediate; Hydraulic fluids; Cleaning agent; Not Known or Reasonably Ascertainable Quelle: EPA Chemical Data Reporting (CDR)
  • Sources/Uses: Used as a solvent for wood stains, lacquers, inks, textile dye pastes, paints, waxes, dyes, and nitrocellulose resins; Also used in brake fluid, aviation fuel anti-icing additive, and inert ingredient in pesticides; [HSDB] Used as an intermediate; [Hawley] Not produced commercially in the EU; [Glycol Ethers Online] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Painting (Solvents) [Category: Paint]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For diethylene glycol monomethyl ether (USEPA/OPP Pesticide Code: 042204) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: ... Inert (or occasionally active) ingredients in pesticide formulations applied to growing crops only. Use: Deactivator for formulations used before crop emerges from soil, stabilizer. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: This additive is for use in liquid hydrocarbon fuels including jet fuel, diesel fuels, marine fuels, and fuel oils for anti-microbial control of fungi and bacteria found in hydrocarbon fuel systems and/or for anti-icing control. /Phillips Fuel Additive 56 MB/ Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: De-icing additive for jet fuel. Solvent for paints, coatings and inks. Deactivator and stabilizer for pesticides. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for DIETHYLENE GLYCOL MONOMETHYL ETHER (10 total), please visit the HSDB record page. Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Verzeichnisverknüpfungen für 2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME)

Verzeichnis Restriction reference
Ref. 84966

METHOXYDIGLYCOL

CAS: 111-77-3
EC: 203-906-6

Für diesen Eintrag gibt es nur wenige direkte Treffer; daher werden auch nahe liegende Einträge aus Anhang II angezeigt.

Anhang II 999
Nahe liegender Eintrag im selben Anhang

Hexane

CAS: 110-54-3
EC: 203-777-6
Anhang II 998
Nahe liegender Eintrag im selben Anhang

Chloroacetaldehyde

CAS: 107-20-0
EC: 203-472-8
Anhang II 996
Nahe liegender Eintrag im selben Anhang

Carbendazim

CAS: 10605-21-7
EC: 234-232-0
Anhang II 995
Nahe liegender Eintrag im selben Anhang

4-Nitrosophenol

CAS: 104-91-6
EC: 203-251-6
Anhang II 994
Nahe liegender Eintrag im selben Anhang

Heptachlor-epoxide

CAS: 1024-57-3
EC: 213-831-0

Was Anhang II für 2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) bedeutet

2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) ist in Anhang II der EU-Kosmetikverordnung (EG) Nr. 1223/2009 als verbotener Stoff aufgeführt und darf nicht absichtlich zugesetzt werden. Artikel 17 regelt gesondert unbeabsichtigte geringe Mengen, die bei guter Herstellungspraxis technisch unvermeidbar und mit der Sicherheitsanforderung nach Artikel 3 vereinbar sind.

Rezepturentwickler müssen ihre Inhaltsstoffe und Rohstoffe prüfen, um sicherzustellen, dass keiner davon diesen Stoff enthält. Lieferanten sollten auf Anfrage eine Dokumentation vorlegen, die die Abwesenheit bestätigt.

Dieser Eintrag ist zum Abgleich von Namen und Kennungen mit 1 Inhaltsstoff des CosIng-Verzeichnisses verknüpft. Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.

Compliance-Checkliste

  • Prüfen Sie, dass dieser Stoff in allen Rohstoffen und fertigen Rezepturen nicht enthalten ist.
  • Fordern Sie von Rohstofflieferanten eine Abwesenheitsbestätigung oder ein Analysenzertifikat an.
  • Dokumentieren Sie das Prüfergebnis in der Produktinformationsdatei (PIF).
  • Dieser Stoff hat eine CMR-Einstufung. Prüfen Sie die CMR-Tabelle oben und den aktuellen Status nach Anhang II/III, bevor Sie ihn verwenden.

Häufig gestellte Fragen

Ja. 2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) ist in Anhang II der EU-Kosmetikverordnung (EG) Nr. 1223/2009 aufgeführt und als absichtlich zugesetzter kosmetischer Inhaltsstoff verboten. Artikel 17 sieht eine enge Ausnahme für unbeabsichtigte geringe Mengen vor, die bei guter Herstellungspraxis technisch unvermeidbar sind, sofern das Produkt nach Artikel 3 sicher bleibt.

CAS 111-77-3 ist die eindeutige numerische Kennung, die der Chemical Abstracts Service 2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) zugewiesen hat. In der Compliance-Arbeit für kosmetische Mittel dient die CAS-Nummer dazu, den Stoff über regulatorische Datenbanken, Rohstoffspezifikationen und Sicherheitsbewertungsberichte hinweg abzugleichen. Mehrere EU-Anhangseinträge können dieselbe CAS-Nummer haben, wenn derselbe Stoff unter unterschiedlichen Bedingungen oder in verschiedenen Anhängen erscheint.

2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) hat nach der EU-CLP-Verordnung eine CMR-Einstufung (karzinogen, mutagen oder reproduktionstoxisch). Nach Artikel 15 der EU-Kosmetikverordnung (EG) Nr. 1223/2009 sind CMR-Stoffe der Kategorie 1A oder 1B in kosmetischen Mitteln verboten, sofern sie nicht ausdrücklich zugelassen sind. CMR-Stoffe der Kategorie 2 dürfen nur verwendet werden, wenn der SCCS sie als sicher bewertet hat. Prüfen Sie vor der Verwendung stets den aktuellen Anhangsstatus und etwaige geltende Ausnahmen.

Fügen Sie Ihre vollständige Inhaltsstoffliste (INCI) in den INCI-Checker auf dieser Website ein und gleichen Sie sie mit allen Einträgen der Anhänge II–VI ab. Das Werkzeug hebt alle Inhaltsstoffe hervor, die mit beschränkten, verbotenen oder als Allergen markierten Einträgen übereinstimmen. Das ist nützlich für die schnelle Compliance-Prüfung von Rezepturen fertiger Produkte oder von Rohstoffdeklarationen.

Quellenhinweis zu Anhang II, Eintrag 2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME)

Diese Seite fasst einen Eintrag aus Anhang II für 2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.

Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang II für 2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Fügen Sie eine vollständige INCI-Liste ein, um 2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.

INCI-Checker

Einträge vergleichen

2-Methoxyethoxy)ethanol (Diethylene glycol mono­methyl ether; DEGME) nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.

Vergleichen

Den Anhang durchsuchen

Alle Einträge in Anhang II ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.

Anhang II öffnen