Zum Hauptinhalt springen
Amtlicher EU-KennzeichnungsnameGlossareintrag 22765

POTASSIUM SULFIDE

Dieser Eintrag bestätigt einen amtlichen gebräuchlichen Inhaltsstoffnamen für die EU-Kennzeichnung kosmetischer Mittel. Er bestätigt für sich genommen nicht, dass der Stoff zulässig, unbeschränkt oder sicher ist.

Globale Belegübersicht

Die ermittelte Identität hat übereinstimmende regulatorische Belege in 0 von 13 indizierten Marktdatensätzen: 0 Ländereinträge und 0 EU-Anhangseinträge. Jedes Ergebnis und jede Belegslücke ist unten aufgeführt.

0 Märkte mit Belegen
Geprüfte Märkte
13
Märkte mit Belegen
0
Belegslücken
13
Ermittelte Kennungen
3

Ermittelte Stoffidentität

CAS:1312-73-837248-34-3
EC:215-197-0
Einträge im Inhaltsstoffindex:
POTASSIUM SULFIDE
Kosmetische Funktionen: DEPILATORY

Dipotassium sulphide

Beschränkungshinweis aus dem Verzeichnis: III/23

1 übereinstimmender oder gemeldeter Name
POTASSIUM SULFIDE

Regulatorische Belege über Märkte hinweg

Keiner der 13 hier erfassten Märkte hat eine importierte Vorschrift unter dem Namen POTASSIUM SULFIDE.

Das ist eine Aussage über dieses Verzeichnis, nicht über das Recht: Eine fehlende importierte Vorschrift ist kein Beleg dafür, dass ein Stoff zulässig ist. Eine Vorschrift kann unter einem anderen Namen, unter einer CAS- oder EC-Nummer, die dieser Glossareintrag nicht führt, oder in einem noch nicht importierten Datensatz existieren.

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 1312-73-8
CAS 1312-73-8CAS 37248-34-3PubChem CID 162263

Potassium Sulfide

Potassium sulfide, hydrated, with not less than 30% water of crystallization appears as a red crystalline solid. Denser than water. Contact may severely irritate skin, eyes and mucous membranes. May be toxic by ingestion. — CAMEO Chemicals

IUPAC-Name
dipotassium;sulfide
Summenformel
K2S
Molekulargewicht
110.26 g/mol
Exakte Masse
109.89948414 Da
Topologische polare Oberfläche
1,0 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
1
Kovalente Einheiten
3
Definierte Stereozentren
0

Auch bekannt als

potassium sulphideDipotassium monosulfidePotassium sulfide (2:1)POTASSIUM MONOSULPHIDEDIPOTASSIUM MONOSULPHIDE31R0R7HD0NPOTASSIUM SULPHIDE (2:1)HEPAR SULFURIS
16 weitere gemeldete Namen
RefChem:57958POTASSIUM SULFURETKali Sulf. Bath EssencePOTASSIUM SULFIDE (K2S4)POTASSIUM SULPHIDE, ANHYDROUSPOTASSIUM POLYSULFIDE (K2S4)POTASSIUM SULFIDE, WITH LESS THAN 30% WATER OF CRYSTALLIZATIONPOTASSIUM SULPHIDE, WITH LESS THAN 30% WATER OF CRYSTALLIZATION215-197-0AI3-25350Dipotassium monosulfide (K2S)Dipotassium tetrasulfideEINECS 215-197-0HSDB 1204Potassium monosulfidePotassium sulfide (K2(S4))
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer162263

Attributed physical-property, hazard, environmental and use annotations.

  • Physical Description: Potassium sulfide, anhydrous appears as a yellow-red to red crystalline mass or fused solid with an odor of rotten eggs. Quelle: CAMEO Chemicals
  • Physical Description: Potassium sulfide, hydrated, with not less than 30% water of crystallization appears as a red crystalline solid. Denser than water. Contact may severely irritate skin, eyes and mucous membranes. May be toxic by ingestion. Quelle: CAMEO Chemicals
  • Physical Description: White very hygroscopic solid; Discolored by air; [Merck Index] Red or yellow-red deliquescent solid; [Hawley] White to yellow powder with an odor of rotten eggs; [Strem MSDS] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Physical Description: HYGROSCOPIC WHITE CRYSTALS WITH CHARACTERISTIC ODOUR. TURNS RED OR BROWN ON EXPOSURE TO AIR. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
  • First Aid: Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]:; Refer to the "General First Aid" section. (ERG, 2024) Quelle: CAMEO Chemicals
  • First Aid: Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:; Refer to the "General First Aid" section. Specific First Aid: For corrosives, in case of contact, immediately flush skin or eyes with running water for at least 30 minutes. Additional flushing may be required. Removal of solidified molten material from skin requires medical assistance. (ERG, 2024) Quelle: CAMEO Chemicals
  • ERG2024, Guide 153 (Potassium sulfide, hydrated, with not less than 30% water of crystallization): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • ERG2024, Guide 135 (Potassium sulfide, anhydrous; Potassium sulfide, with less than 30% water of crystallization): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P260, P264, P273, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P391, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H251 (44.3%): Self-heating; may catch fire [Danger Self-heating substances and mixtures]; H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H400 (100%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P235, P260, P264, P273, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P391, P405, P407, P410, P413, P420, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 88 reports by companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H251: Self-heating; may catch fire [Danger Self-heating substances and mixtures]; H300: Fatal if swallowed [Danger Acute toxicity, oral]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P235, P260, P264, P264+P265, P270, P280, P301+P316, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P308+P316, P316, P317, P321, P330, P363, P405, P407, P410, P413, P420, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Signal: Danger Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard] Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Weitere maßgebliche Stoffrecherche

Jeder Link durchsucht die jeweilige Quelle nach dieser Identität. Ein Link ist ein Recherchepfad und keine Behauptung, dass die Quelle einen exakten Eintrag enthält. Was jede Quelle ist und welches rechtliche Gewicht sie hat

Diesen Eintrag weiterverwenden

In einer Rezeptur prüfenEigenständigen Vergleich öffnen

Amtliche Quelle und Geltungsbereich

Importiert aus dem Durchführungsbeschluss (EU) 2025/1175 der Kommission (Datensatzversion EU 2025/1175). Das Glossar liefert gebräuchliche Inhaltsstoffnamen für die nach Artikel 19 Absatz 1 Buchstabe g vorgeschriebene Inhaltsstoffliste; es ist keine Zulassungs- oder Sicherheitsliste.

Amtlichen Beschluss öffnen