CAS 1303-86-2
CAS 1303-86-2 entspricht 1 EU-Anhangseintrag in den Anhängen II–VI der Verordnung (EG) Nr. 1223/2009.
Einträge zu CAS 1303-86-2
1 insgesamtChemische Identität und Eigenschaften

Boron oxide (B2O3)
Boron oxide appears as colorless, semi-transparent glassy lumps or hard white odorless crystals. Mp 450 °C; bp: 1860 °C. Density: 2.46 g cm-3. Moderately soluble in water. Used as an insecticide; as the starting material for the synthesis of other boron compounds; as a fluxing agent in enamels and glasses; and in mixture with 2-6% boron nitride, as a bonding agent in the hot isostatic pressing of boron nitride ceramics. — CAMEO Chemicals
- IUPAC-Name
- 2,4,5-trioxa-1,3-diborabicyclo[1.1.1]pentane
- Summenformel
- B2O3
- Molekulargewicht
- 69.63 g/mol
- Exakte Masse
- 70.0033542 Da
- Topologische polare Oberfläche
- 27,7 Ų
- Wasserstoffbrücken-Donoren
- 0
- Wasserstoffbrücken-Akzeptoren
- 3
- Kovalente Einheiten
- 1
- Definierte Stereozentren
- 0
Auch bekannt als
16 weitere gemeldete Namen
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 3380 °F at 760 mmHg (NIOSH, 2024) Quelle: CAMEO Chemicals
- Boiling Point: 1500 °C (crystal) Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: ~1860 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 3380 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Boiling Point: 1500 °C @760 [mm Hg] Quelle: PAC Chemical Database, U.S. Department of Energy
- Boiling Point: 3380 °F Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Color/Form: Colorless, brittle, vitreous, semitransparent lumps or hard, white crystals Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Colorless, glassy or hexagonal crystals, hygroscopic Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Colorless powder or vitreous crystals Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 2.46 (NIOSH, 2024) - Denser than water; will sink Quelle: CAMEO Chemicals
- Density: 1.8 g/cu cm (amorphous); 2.46 g/cu cm (crystal) Quelle: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 2.46 (cryst) Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 2.46 Quelle: Occupational Safety and Health Administration (OSHA)
- Density: 2.46 @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Density: 2.46 Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Melting Point: 842 °F (NIOSH, 2024) Quelle: CAMEO Chemicals
- Melting Point: 450 °C (crystal) Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: 450 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 842 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Melting Point: 450 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Melting Point: 842 °F Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Odor: Odorless Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Boron oxide appears as colorless, semi-transparent glassy lumps or hard white odorless crystals. Mp 450 °C; bp: 1860 °C. Density: 2.46 g cm-3. Moderately soluble in water. Used as an insecticide; as the starting material for the synthesis of other boron compounds; as a fluxing agent in enamels and glasses; and in mixture with 2-6% boron nitride, as a bonding agent in the hot isostatic pressing of boron nitride ceramics. Quelle: CAMEO Chemicals
- Physical Description: Other Solid; Dry Powder; CBI; Large Crystals; Liquid; Other Solid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless, semitransparent lumps or hard, white, odorless crystals; [NIOSH] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: WHITE HYGROSCOPIC POWDER OR GRANULES Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: Colorless, semitransparent lumps or hard, white, odorless crystals. Quelle: Occupational Safety and Health Administration (OSHA)
- Physical Description: Colorless, semitransparent lumps or hard, white, odorless crystals. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Refractive Index: INDEX OF REFRACTION: 1.61 Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 3 % (NIOSH, 2024) Quelle: CAMEO Chemicals
- Solubility: Slowly soluble in 30 parts cold water; slowly soluble in 5 parts boiling water; soluble in alcohol, glycerol Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Water solubility: 4.0% at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 2.77 g/100 g water at 20 °C. Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water, g/l at 25 °C: 36 (moderate) Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: 3% Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Vapor Pressure: 0 mmHg (approx) (NIOSH, 2024) Quelle: CAMEO Chemicals
- Vapor Pressure: Negligible at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: 0 mmHg (approx) Quelle: Occupational Safety and Health Administration (OSHA)
- Vapor Pressure: 0 mmHg (approx) Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- pH: pH = 5.1 at 20 °C 1.0% solution Quelle: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by inhalation of its aerosol and by ingestion. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Exposure Routes: inhalation, ingestion, skin and/or eye contact Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- First Aid: Excerpt from NIOSH Pocket Guide for Boron oxide:; Eye: IRRIGATE IMMEDIATELY - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: WATER FLUSH PROMPTLY - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: FRESH AIR - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. Other measures are usually unnecessary.; Swallow: MEDICAL ATTENTION IMMEDIATELY - If this chemical has been swallowed, get medical attention immediately. (NIOSH, 2024) Quelle: CAMEO Chemicals
- First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: Fresh air; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H360 (95.1%): May damage fertility or the unborn child [Danger Reproductive toxicity]; H360FD (13.1%): May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 588 reports by companies from 17 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P261, P264+P265, P271, P280, P304+P340, P305+P351+P338, P318, P319, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Warning Quelle: NITE-CMC
- GHS Hazard Statements: H303: May be harmful if swallowed [Warning Acute toxicity, oral]; H316: Causes mild skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: NITE-CMC
- Target Organs: Eyes, skin, respiratory system Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Consumer Uses: Other; Adhesion/cohesion promoter; Flame retardant; Not Known or Reasonably Ascertainable; Catalyst Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Not Known or Reasonably Ascertainable; Catalyst; Flux agent; Flame retardant; Hardener; Other; Processing aids not otherwise specified Quelle: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used to produce elemental boron, heat-resistant glass, fire-resistant paint, electronics, and herbicides; Derived by heating boric acid; [Hawley] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Semiconductor Manufacturing [Category: Industry]; Glass Manufacturing [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: For boron oxide (USEPA/OPP Pesticide Code: 011002) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Used in herbicides; fire resistant additive for paints, electronics; liquid encapsulation techniques Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: In metallurgy; in analysis of silicates to determine silicon dioxide and alkalies; in blowpipe analysis. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Flux for enamels and glazes; additive for glass fibers; chemical intermediate for elemental boron, boron master alloys, borides, boron carbide, nitrides and halides Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: As catalyst Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Wie CAS 1303-86-2 auf dieser Website verwendet wird
CAS 1303-86-2 ist die Kennung des Chemical Abstracts Service, mit der diese Seite einem bestimmten Stoff zugeordnet wird. Im aktuellen Datenbestand hat 1 EU-Anhangseintrag diese Kennung; so können Sie gegenprüfen, ob derselbe Stoff in einem oder in mehreren regulatorischen Zusammenhängen auftaucht.
Nutzen Sie diese Seite, wenn eine Lieferantenspezifikation, ein Sicherheitsdatenblatt oder ein Rohstoffdossier CAS 1303-86-2 nennt und Sie alle verknüpften Einträge der Anhänge II–VI an einem Ort sehen möchten. Die Eintragskarten oben sind der schnellste Weg zu Konzentrationsgrenzen, Warnhinweisen, Anhangszuordnung und Produktartbedingungen.
Häufig gestellte Fragen
Werkzeuge und nächste Schritte
Rezeptur prüfen
Eine vollständige INCI-Liste prüfen und anschließend mit CAS 1303-86-2 Lieferantendokumente zu den gefundenen Stoffen gegenprüfen.
INCI-CheckerNach Name suchen
Nach INCI-Namen, Aliasen oder verwandten Kennungen suchen, die in Ihrer Dokumentation neben CAS 1303-86-2 stehen.
Suche