Zum Hauptinhalt springen
ProhibitedBinding ruleSAOriginal is EnglishImport aus amtlicher Quelle geprüft

4,4'-Methylenediphenyl diisocyanate; diphenylmethane-4,4'-diisocyanate [1]; 2,2'-Methylenediphenyl diisocyanate; diphenylmethane-2,2'-diisocyanate [2]; o-(p-Isocyanatobenzyl)phenyl isocyanate; diphenylmethane-2,4'-diisocyanate [3]; Methylenediphenyl diisocyanate [4]

4,4'-Methylenediphenyl diisocyanate; diphenylmethane-4,4'-diisocyanate [1]; 2,2'-Methylenediphenyl diisocyanate; diphenylmethane-2,2'-diisocyanate [2]; o-(p-Isocyanatobenzyl)phenyl isocyanate; diphenylmethane-2,4'-diisocyanate [3]; Methylenediphenyl diiso

Listed by the Saudi Food and Drug Authority as prohibited in cosmetic products.

Regulatorische Entscheidung und vollständige Bedingungen

Status
Prohibited
Rechtsrolle
Binding rule
Regulatorische Zusammenfassung
Listed by the Saudi Food and Drug Authority as prohibited in cosmetic products.
Bedingungen und Beschränkungen
A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Öffnen Sie die zitierte Quelle und wenden Sie die unten genannten marktweiten Anforderungen an.

Stoffidentität

Name in der amtlichen Quelle
4,4'-Methylenediphenyl diisocyanate; diphenylmethane-4,4'-diisocyanate [1]; 2,2'-Methylenediphenyl diisocyanate; diphenylmethane-2,2'-diisocyanate [2]; o-(p-Isocyanatobenzyl)phenyl isocyanate; diphenylmethane-2,4'-diisocyanate [3]; Methylenediphenyl diisocyanate [4]
CAS
101-68-8; 2536-05-2; 5873-54-1; 26447-40-5
EC
202-966-0
Identitätszuordnung
cas_number
Verknüpfter Inhaltsstoff
METHYLENE DIPHENYL DIISOCYANATE

Verknüpfte CosIng-Identitätsdaten

Namen und Aliase

METHYLENE DIPHENYL DIISOCYANATE

CosIng-Beschreibung: 4,4'-Diisocyanatodiphenylmethane,4,4'-Diphenylmethane diisocyanate,MDI,1,1'-Methylenebis(4-isocyanaotbenzene)

Beschränkungshinweis aus dem EU-Verzeichnis: II/1533

Erfasste kosmetische Funktion: NOT REPORTED

Funktionsseiten:NOT REPORTED

Das vollständige Inhaltsstoffprofil ansehen

Marktübergreifende Übersicht zu dieser Identität

Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.

5 Marktdatensätze
Chemische 2D-Struktur aus PubChem für CAS 101-68-8
CAS 101-68-8CAS 26447-40-5PubChem CID 7570

Verifizierte Chemie für CAS 101-68-8

Diphenylmethane diisocyanate

Diphenylmethane-4,4'-diisocyanate is a diisocyanate consisting of diphenylmethane with two isocyanate groups at the 4- and 4'-positions. It has a role as an allergen and a hapten. It derives from a hydride of a diphenylmethane. — ChEBI

IUPAC-Name
1-isocyanato-4-[(4-isocyanatophenyl)methyl]benzene
Summenformel
C15H10N2O2
Molekulargewicht
250.25 g/mol
Exakte Masse
250.074227566 Da
Monoisotopische Masse
250.074227566 Da
XLogP3
5,4
Topologische polare Oberfläche
58,9 Ų
Molekulare Komplexität
332,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
4
Drehbare Bindungen
4
Schweratome
19
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

4,4'-Diphenylmethane diisocyanateBis(4-isocyanatophenyl)methane4,4'-Methylenebis(phenyl isocyanate)IsonateDesmodur 44p,p'-Diphenylmethane diisocyanate1,1'-Methylenebis(4-isocyanatobenzene)Methylbisphenyl isocyanate
16 weitere gemeldete Namen
4,4'-Methylenediphenyl diisocyanate4,4'-DiisocyanatodiphenylmethaneMethylene bisphenyl isocyanatediphenylmethane-4,4'-diisocyanateCaradate 30Nacconate 300Isonate 125MBis(p-isocyanatophenyl)methaneDiphenylmethyl diisocyanateIsonate 125 MFRubinate 44Bis(1,4-isocyanatophenyl)methaneMethylenebis(4-phenyl isocyanate)Hylene M50Diphenylmethan-4,4'-diisocyanatMethylenebis(4-isocyanatobenzene)
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
4
3D-Ringe
2
3D-Hydrophobe
0
3D-Akzeptormerkmale
2
3D-Donormerkmale
0
3D-Anionenzentren
0
3D-Kationenzentren
0
3D-Konformere
10
Effektive 3D-Rotoren
4,0
Maschinenlesbare Strukturkennungen
SMILES
C1=CC(=CC=C1CC2=CC=C(C=C2)N=C=O)N=C=O
InChI
InChI=1S/C15H10N2O2/c18-10-16-14-5-1-12(2-6-14)9-13-3-7-15(8-4-13)17-11-19/h1-8H,9H2
InChIKey
UPMLOUAZCHDJJD-UHFFFAOYSA-N

Belege aus weiteren wissenschaftlichen Datenbanken

EMBL-EBI ChEBI
Exakter KennungstrefferCHEBI:53218

diphenylmethane-4,4'-diisocyanate

A diisocyanate consisting of diphenylmethane with two isocyanate groups at the 4- and 4'-positions.

Rezeptur
C15H10N2O2
Durchschnittsmasse
250.257 g/mol
Monoisotopische Masse
250.07423 Da
Formale Ladung
0
  • diisocyanate — is a (CHEBI:53213)
  • hapten — has role (CHEBI:59174)
  • allergen — has role (CHEBI:50904)
  • diphenylmethane — has parent hydride (CHEBI:38884)
  • hapten — has role (CHEBI:59174)
  • allergen — has role (CHEBI:50904)
  • diisocyanate — is a (CHEBI:53213)
Weitere kuratierte Namen
1,1'-methylenebis(4-isocyanatobenzene)1,1'-Methylenebis(4-isocyanatobenzene)4-4'-Diisocyanate de diphenylmethane4,4'-Diisocyanatodiphenylmethane4,4'-Diphenylmethane diisocyanate4,4'-Methylenebis(phenyl isocyanate)4,4'-methylene diphenyl diisocyanate4,4'-Methylenediphenyl diisocyanate4,4'-Methylenediphenylene diisocyanate4,4'-Methylenediphenylene isocyanate4,4'-Methylenedi(phenyl isocyanate)4,4'-Methylenediphenyl isocyanate4,4'-Methylenedi-p-phenylene diisocyanateBis(1,4-isocyanatophenyl)methaneBis(4-isocyanatophenyl)methaneBis(para-isocyanatophenyl)methaneBis(p-isocyanatophenyl)methaneDiphenylmethan-4,4'-diisocyanatDiphenylmethane-4,4'-diisocyanateDiphenyl methane diisocyanateDiphenylmethane diisocyanateDiphenylmethyl diisocyanateMDIMDRMethylbisphenyl isocyanateMethylenebis(4-isocyanatobenzene)Methylenebis(4-phenylene isocyanate)Methylenebis(4-phenyl isocyanate)Methylenebis(para-phenylene isocyanate)Methylenebis(para-phenyl isocyanate)Methylenebisphenyl diisocyanateMethylene bisphenyl isocyanateMethylenebis(p-phenylene isocyanate)Methylenebis(p-phenyl isocyanate)Methylenedi-para-phenylene diisocyanateMethylene diphenyl diisocyanateMethylenedi-p-phenylene diisocyanateMethylene di-p-phenylene isocyanatepara,para'-Diphenylmethane diisocyanatepara,para'-Methylenebis(phenyl isocyanate)
Querverweise aus dieser Quelle

Zugeordnet durch: Exact CAS cross-reference in the ChEBI compound record. Quelle aktualisiert: 2016-03-21. Abgerufen: 2026-08-31. Quelleneintrag öffnen

NIH PubChem PUG-View
Exakter Kennungstreffer7570

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Quelle: CAMEO Chemicals
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash immediately - If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H373 **: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P264+P265, P271, P272, P280, P284, P302+P352, P304+P340, P305+P351+P338, P317, P318, P319, P321, P332+P317, P333+P317, P337+P317, P342+P316, P362+P364, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (99.9%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (90.1%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H334 (100%): May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H335 (96%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H351 (99%): Suspected of causing cancer [Warning Carcinogenicity]; H373 (88.9%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P264+P265, P271, P272, P280, P284, P302+P352, P304+P340, P305+P351+P338, P317, P318, P319, P321, P332+P317, P333+P317, P337+P317, P342+P316, P362+P364, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1939 reports by companies from 54 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Note: This chemical does not meet GHS hazard criteria for 2.6% (37 of 1404) of reports. Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H315 (97.4%): Causes skin irritation [Warning Skin corrosion/irritation]; H317 (97.4%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (97.4%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H330 (31.4%): Fatal if inhaled [Danger Acute toxicity, inhalation]; H332 (66%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H334 (97.4%): May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H335 (92%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H351 (94.3%): Suspected of causing cancer [Warning Carcinogenicity]; H373 (95.4%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P264+P265, P271, P272, P280, P284, P302+P352, P304+P340, P305+P351+P338, P316, P317, P318, P319, P320, P321, P332+P317, P333+P317, P337+P317, P342+P316, P362+P364, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1404 reports by companies from 40 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 37 of 1404 reports by companies.; There are 39 notifications provided by 1367 of 1404 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • Health Effects: Exposure to high levels of cyanide for a short time harms the brain and heart and can even cause coma, seizures, apnea, cardiac arrest and death. Chronic inhalation of cyanide causes breathing difficulties, chest pain, vomiting, blood changes, headaches, and enlargement of the thyroid gland. Skin contact with cyanide salts can irritate and produce sores. (L96, L97) Quelle: Toxin and Toxin Target Database (T3DB)
  • Toxicity Summary: IDENTIFICATION AND USE: This chemical exists as a colorless or light yellow fused solid. 4,4'-Methylenediphenyl diisocyanate (MDI) is miscible in water, and soluble in acetone, benzene, kerosene, and nitrobenzene. The product is used to make rigid and semi-rigid polyurethane foams. Pure MDI is distilled from the reaction mixture and is used for reaction injection molding, thermoplastic elastomers, and adhesives. HUMAN EXPOSURE AND TOXICITY: MDI is irritating to skin, eyes, and respiratory passages. Nose and throat irritation has also been observed. A few cases of alveolitis have been reported in workers exposed to MDI vapors. Contact allergy and allergic contact eczema have been reported in workers exposed to MDI. Cases of asthmatic breathing have been observed in workers. Lung fibrosis is also been observed in workers exposed to MDI. Children living in proximity of an accidental MDI release had signs of sore throat, dizziness, nausea and breathing difficulties MDI is an allergic sensitizer. Workers in occupational settings have the potential for inhalation or skin contact with particles of MDI. There is inadequate evidence for the carcinogenicity of MDI in humans. ANIMAL STUDIES: Quelle: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Cyanide is an inhibitor of cytochrome c oxidase in the fourth complex of the electron transport chain (found in the membrane of the mitochondria of eukaryotic cells). It complexes with the ferric iron atom in this enzyme. The binding of cyanide to this cytochrome prevents transport of electrons from cytochrome c oxidase to oxygen. As a result, the electron transport chain is disrupted and the cell can no longer aerobically produce ATP for energy. Tissues that mainly depend on aerobic respiration, such as the central nervous system and the heart, are particularly affected. Cyanide is also known produce some of its toxic effects by binding to catalase, glutathione peroxidase, methemoglobin, hydroxocobalamin, phosphatase, tyrosinase, ascorbic acid oxidase, xanthine oxidase, succinic dehydrogenase, and Cu/Zn superoxide dismutase. Cyanide binds to the ferric ion of methemoglobin to form inactive cyanmethemoglobin. (L97) Quelle: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: 4,4'-Methylenediphenyl diisocyanate hydrolyzes rapidly in aqueous solution(1-3); therefore, bioconcentration will not be an important environmental fate process(SRC). Exposure of carp to 0.00001% concentrations of 4,4'-methylenediphenyl diisocyanate for an eight week period resulted in no bioaccumulations(4). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: When monomeric 4,4'-methylenediphenyl diisocyanate is handled as a liquid (melting point 38 °C), it will solidify on contact with soil(1). 4,4'-Methylenediphenyl diisocyanate reacts readily with water(1-5). If released to soil, agglomerations of 4,4'-methylenediphenyl diisocyanate react with water to form a hard crust of inert, water-insoluble material comprised of polyureas(1); the polyurea crusts can entrap monomeric 4,4'-methylenediphenyl diisocyanate and prevent further contact with water, thereby increasing the persistence time(1). 4,4'-Methylenediphenyl diisocyanate is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 5.0X10-6 mm Hg(6). Biodegradation data in soil were not available(SRC, 2012). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: 4,4'-Methylenediphenyl diisocyanate was added to a model marine system and a model river to simulate spill situations(1,2); 4,4'-methylenediphenyl diisocyanate concentrations fell to a maximum of 5% of initial value within one day(1,2). Spills or agglomerations of 4,4'-methylenediphenyl diisocyanate react with water to form a hard crust of inert, water-insoluble material comprised of polyureas(1); the polyurea crusts can entrap monomeric 4,4'-methylenediphenyl diisocyanate and prevent further contact with water, thereby increasing the persistence time(1). Small aquatic releases of 4,4'-methylenediphenyl diisocyanate will hydrolyze rapidly in water with an estimated half-life of a few minutes to a few hours(3-5). Biodegradation data in water were not available(SRC, 2012). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 4,4'-methylenediphenyl diisocyanate, which has a vapor pressure of 5.0X10-6 mm Hg at 25 °C(2), is expected to exist in both the vapor and particulate phases in the ambient atmosphere(SRC). Vapor-phase 4,4'-methylenediphenyl diisocyanate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 11 hours(SRC), calculated from its rate constant of 1.2X10-11 cu cm/molecule-sec at 25 °C(SRC) determined using a structure estimation method(3). Reaction with atmospheric water vapor(4) may increase the atmospheric degradation rate several fold(SRC). Particulate-phase 4,4'-methylenediphenyl diisocyanate will be removed from the atmosphere by wet and dry deposition(SRC). 4,4'-Methylenediphenyl diisocyanate does not contain chromophores that absorb at wavelengths >290 nm(5), and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Monomers; Polymerization promoter; Binder; Intermediate; Pigment Quelle: EPA Chemical Data Reporting (CDR)
  • Industry Uses: Other; Binder; Polymerization promoter; Monomers; Sealant (barrier); Not Known or Reasonably Ascertainable; Elasticizer; Surface modifier; Adhesion/cohesion promoter; Hardener; Intermediate Quelle: EPA Chemical Data Reporting (CDR)
  • Uses: The commercial form of MDI is primarily used to produce polyurethane foams. Quelle: EPA Hazardous Air Pollutants
  • Sources/Uses: Pattern of use in 1974: coatings (28%); elastomers (22%); thermoplastic resins (22%); spandex fibers (19%); millable gums (9%); [HSDB] Occupational asthma reported in foundry; [Malo] Allergic contact dermatitis in shoemakers and other workers using glues; [Marks] Used in spray-on truck bed liners; [Reference #2] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Molding and Core Making [Category: Foundry]; Metal Preparation and Pouring [Category: Foundry]; Textiles (Fiber & Fabric Manufacturing) [Category: Industry]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Plastic Composites Manufacturing [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Activities with risk of exposure: Preparing and mounting animal skins (taxidermy) [Category: Hobbies] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Sources/Uses: Used in the furniture, car, shoe, carpet, refrigerators and freezers, textile, coatings, and construction industries; [IUCLID] Used primarily in the manufacture of rigid polyurethane foams; Other uses include coatings, adhesives, sealants, elastomers, paints, footwear, (semi) flexible and thermoplastic polyurethane foams, polyurethane fibers, and to make particle board and foundry mould cores; [CPS&Q: RARs - Final Report] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Molding and Core Making [Category: Foundry]; Textiles (Fiber & Fabric Manufacturing) [Category: Industry]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Plastic Composites Manufacturing [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Typically, a mixture of MDI and its dimer and trimer is formed (polymeric MDI). This product is used primarily to make rigid and semi-rigid polyurethane foams. Pure MDI is distilled from the reaction mixture and is mainly used for reaction injection-molding, thermoplastic elastomers and adhesives. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Preparation of polyurethane resin and spandex fibers; bonding rubber to rayon and nylon. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: MDI is used in two-component polyurethane coating systems which are used for aircraft, tank trucks and truck trailers due to durability and toughness. It is also used to produce polyurethane lacquer coatings applied to certain automobile body components and, to small extent, to patent leather. Other uses ... are in production of thermoplastic polyurethane resins, millable gums and spandex fibers. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: TDI and MDI are used in surface coatings (e.g. for chutes used in mining and agriculture), in the shoe industry for shoe soles, in the automobile industry for shock absorbers, and in a wide variety of other industries. MDI occurs in foundries in binders for casting forms, and in orthopedic surgery in casts for broken bones. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Methylene diphenyl diisocyanate is used in the manufacture of polyurethane and as an an industrial strength adhesive. (L576) Quelle: Toxin and Toxin Target Database (T3DB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
EMBL-EBI ChEBIExakter Treffer2026-08-31
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Chemische 2D-Struktur aus PubChem für CAS 2536-05-2
CAS 2536-05-2PubChem CID 62450

Verifizierte Chemie für CAS 2536-05-2

Diphenylmethane-2,2'-diisocyanate

IUPAC-Name
1-isocyanato-2-[(2-isocyanatophenyl)methyl]benzene
Summenformel
C15H10N2O2
Molekulargewicht
250.25 g/mol
Exakte Masse
250.074227566 Da
Monoisotopische Masse
250.074227566 Da
XLogP3
5,4
Topologische polare Oberfläche
58,9 Ų
Molekulare Komplexität
348,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
4
Drehbare Bindungen
4
Schweratome
19
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

2,2'-Methylenediphenyl diisocyanateAS00FWT3DM2,2'-methylenedi(phenyl isocyanate)1,1'-Methylenebis(2-isocyanatobenzene)Benzene, 1,1'-methylenebis(2-isocyanato-2,2'-diisocyanatodiphenylmethaneEINECS 219-799-4DIPHENYLMETHANE 2,2'-DIISOCYANATE
11 weitere gemeldete Namen
Benzene, 1,1'-methylenebis[2-isocyanato-EC 219-799-4ISOCYANIC ACID, METHYLENEDI-O-PHENYLENE ESTERRefChem:588919bis(2-isocyanatophenyl)methaneUNII-AS00FWT3DMMethylene diphenyldiisocyanatemethylene-bis-phenylisocyanateMethylene-diphenyl diisocyanateAS-62089EN300-22130347
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
4
3D-Ringe
2
3D-Hydrophobe
0
3D-Akzeptormerkmale
2
3D-Donormerkmale
0
3D-Anionenzentren
0
3D-Kationenzentren
0
3D-Konformere
10
Effektive 3D-Rotoren
4,0
Maschinenlesbare Strukturkennungen
SMILES
C1=CC=C(C(=C1)CC2=CC=CC=C2N=C=O)N=C=O
InChI
InChI=1S/C15H10N2O2/c18-10-16-14-7-3-1-5-12(14)9-13-6-2-4-8-15(13)17-11-19/h1-8H,9H2
InChIKey
JIABEENURMZTTI-UHFFFAOYSA-N

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Chemische 2D-Struktur aus PubChem für CAS 5873-54-1
CAS 5873-54-1PubChem CID 62593

Verifizierte Chemie für CAS 5873-54-1

2,4'-Diphenylmethane diisocyanate

IUPAC-Name
1-isocyanato-2-[(4-isocyanatophenyl)methyl]benzene
Summenformel
C15H10N2O2
Molekulargewicht
250.25 g/mol
Exakte Masse
250.074227566 Da
Monoisotopische Masse
250.074227566 Da
XLogP3
5,4
Topologische polare Oberfläche
58,9 Ų
Molekulare Komplexität
376,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
4
Drehbare Bindungen
4
Schweratome
19
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

o-(p-Isocyanatobenzyl)phenyl isocyanateBenzene, 1-isocyanato-2-[(4-isocyanatophenyl)methyl]-2,4'-DiisocyanatodiphenylmethaneDiphenylmethane-2,4'-diisocyanate2,4'-DiphenylmethanediisocyanteYVQ6NX5H3YEINECS 227-534-9CCRIS 8159
16 weitere gemeldete Namen
Benzene, 1-isocyanato-2-((4-isocyanatophenyl)methyl)-Isocyanic acid, diester with 2,4'-methylenediphenoldiphenylmethane-2,4-diisocyanateEC 227-534-9DIPHENYLMETHANE 2,4'-DIISOCYANATE1-ISOCYANATO-2-((4-ISOCYANATOPHENYL)METHYL)BENZENERefChem:442666Benzene, 1-isocyanato-2-(4-isocyanatophenyl)methyl-1-isocyanato-2-(4-isocyanatobenzyl)benzene2,4'-methylenediphenyl diisocyanate1-isocyanato-4-[(2-isocyanatophenyl)methyl]benzene2 4'-METHYLENEBIS(PHENYL ISOCYANATE)UNII-YVQ6NX5H3Y1-Isocyanato-2-[(4-isocyanatophenyl)methyl]-benzene;2,4'-methylenebis(phenyl isocyanate)diphenylmethan-2,4'-diisocyanat
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
4
3D-Ringe
2
3D-Hydrophobe
0
3D-Akzeptormerkmale
2
3D-Donormerkmale
0
3D-Anionenzentren
0
3D-Kationenzentren
0
3D-Konformere
10
Effektive 3D-Rotoren
4,0
Maschinenlesbare Strukturkennungen
SMILES
C1=CC=C(C(=C1)CC2=CC=C(C=C2)N=C=O)N=C=O
InChI
InChI=1S/C15H10N2O2/c18-10-16-14-7-5-12(6-8-14)9-13-3-1-2-4-15(13)17-11-19/h1-8H,9H2
InChIKey
LFSYUSUFCBOHGU-UHFFFAOYSA-N

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Amtliche Quelle und Herkunft

Registrierte Quelle
Saudi SFDA prohibited and restricted ingredient lists
Quellenverweis
SFDA prohibited list, page 153, row 8
Eintrags-ID der Quelle
prohibited-152-8
Quellenversion
live-snapshot-2026-08-30
Quellsprache
English
Übersetzungsstatus
Original is English
Stand geprüft
2026-08-30 05:18 UTC
Validierungsmethode
complete SFDA paginated HTML snapshot; strict page/row counts
SHA-256
ceb6cc636e6b1f4b3013f88ce0297217b49d6194342c6ece5c03b1e04256d71a

Hinweise zum registrierten Datensatz

Datensatzabdeckung
Prohibited and restricted substances with CAS, EC and conditions
Hinweis zur Behörde
Official SFDA dated lists; version and hash each release

Wie dieser Eintrag in den Marktdatensatz passt

2090
aktuelle Einträge für Saudi Arabia
1726
Einträge mit dem Status Prohibited
2090
Einträge aus dieser Quellenversion
1991
Markteinträge mit CAS-Identität

Statusverteilung

Bedingungstext ist bei 0 von 2090 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.

Saudi Arabia Marktkontext

Complete official list index

Abdeckungsversion: SFDA live prohibited/restricted lists, snapshot 30 August 2026

Every page and entry in the public SFDA prohibited and restricted ingredient indexes; restricted detail pages remain the source for conditions.

Verifizierungs-Checkliste

  1. Search names and CAS across both SFDA lists.
  2. Open the cited restricted-entry detail and apply every condition.
  3. Check current SFDA/GSO technical regulations and updates.
  4. Complete eCosma notification, label and responsible-party requirements.

Amtliche Marktquellen

Verifizierungsablauf und Vollständigkeit des Eintrags

Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden

  1. Bestätigen Sie, dass „4,4'-Methylenediphenyl diisocyanate; diphenylmethane-4,4'-diisocyanate [1]; 2,2'-Methylenediphenyl diisocyanate; diphenylmethane-2,2'-diisocyanate [2]; o-(p-Isocyanatobenzyl)phenyl isocyanate; diphenylmethane-2,4'-diisocyanate [3]; Methylenediphenyl diisocyanate [4]“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
  2. Search names and CAS across both SFDA lists.
  3. Open the cited restricted-entry detail and apply every condition.
  4. Check current SFDA/GSO technical regulations and updates.
  5. Complete eCosma notification, label and responsible-party requirements.
  6. Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.

In diesem Eintrag verfügbare Felder

  • Amtlicher StoffnameVerfügbar
  • CASVerfügbar
  • ECVerfügbar
  • Gesonderter BedingungstextIn der Quellzeile nicht vorhanden
  • Datum des InkrafttretensNicht angegeben
  • Snapshot-Hash und MethodeVerfügbar

Fragen, die diese Seite beantwortet

This official record identifies the substance as prohibited for cosmetic use in the stated market scope. Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. No list match is not permission; Gulf/SFDA product, claim, notification and technical requirements still apply.

Der Eintrag zitiert SFDA prohibited list, page 153, row 8, Quellenversion live-snapshot-2026-08-30. Die amtliche Quelle öffnen.

Nein. CAS hilft bei der Klärung der Identität, aber Rechtsordnungen können denselben Stoff unterschiedlich einstufen und unterschiedliche Produktbereiche, Grenzwerte, Warnhinweise und Übergangsfristen anwenden.

Dauerhafte Zitierweise

4,4'-Methylenediphenyl diisocyanate; diphenylmethane-4,4'-diisocyanate [1]; 2,2'-Methylenediphenyl diisocyanate; diphenylmethane-2,2'-diisocyanate [2]; o-(p-Isocyanatobenzyl)phenyl isocyanate; diphenylmethane-2,4'-diisocyanate [3]; Methylenediphenyl diisocyanate [4]. SFDA prohibited list, page 153, row 8. Saudi Arabia. Source version live-snapshot-2026-08-30. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/sa/records/11107/

Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.

Auslegung und Grenzen für Saudi Arabia

This official record identifies the substance as prohibited for cosmetic use in the stated market scope.

Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

Wie die Rechtsrolle auszulegen ist

The cited row forms part of a binding rule or legally incorporated list for this market.

Belege auf dieser Seite

  • Erfasstes Ergebnis: Prohibited
  • Rechtsrolle: Binding rule
  • Quellenversion: live-snapshot-2026-08-30

Was es nicht beweist

No list match is not permission; Gulf/SFDA product, claim, notification and technical requirements still apply.

Weitere maßgebliche Stoffrecherche

Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Diese Identität bei der Quelle recherchieren

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Diese Identität bei der Quelle recherchieren

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Diese Identität bei der Quelle recherchieren

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Diese Identität bei der Quelle recherchieren

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Diese Identität bei der Quelle recherchieren

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Diese Identität bei der Quelle recherchieren

US EPA CompTox CTX APIs

Für den Import ist ein API-Schlüssel erforderlich

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Diese Identität bei der Quelle recherchieren