bis(2-Methoxyethyl) ether (Dimethoxydiglycol)
Listed by the Saudi Food and Drug Authority as prohibited in cosmetic products.
Regulatorische Entscheidung und vollständige Bedingungen
- Status
- Prohibited
- Rechtsrolle
- Binding rule
- Regulatorische Zusammenfassung
- Listed by the Saudi Food and Drug Authority as prohibited in cosmetic products.
- Bedingungen und Beschränkungen
- A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Öffnen Sie die zitierte Quelle und wenden Sie die unten genannten marktweiten Anforderungen an.
Stoffidentität
- Name in der amtlichen Quelle
- bis(2-Methoxyethyl) ether (Dimethoxydiglycol)
- CAS
- 111-96-6
- EC
- 203-924-4
- Identitätszuordnung
- cas_number
- Verknüpfter Inhaltsstoff
- DIMETHOXYDIGLYCOL
Verknüpfte CosIng-Identitätsdaten
Namen und Aliase
Beschränkungshinweis aus dem EU-Verzeichnis: II/676
Erfasste kosmetische Funktion: SOLVENT
Funktionsseiten:SOLVENT
Das vollständige Inhaltsstoffprofil ansehenMarktübergreifende Übersicht zu dieser Identität
Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.
European Union
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenGreat Britain
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenNew Zealand
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenASEAN
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenChina
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSouth Korea
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnenBrazil
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenIndia
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSaudi Arabia
Aktueller Eintrag1 verknüpfter Eintrag
Unterstützenden Eintrag öffnen
Verifizierte Chemie für CAS 111-96-6
Diglyme
Diglyme is a polyether that is the dimethyl ether derivative of diethylene glycol. It has a role as a xenobiotic, a solvent and an environmental contaminant. It is functionally related to a diethylene glycol. — ChEBI
- IUPAC-Name
- 1-methoxy-2-(2-methoxyethoxy)ethane
- Summenformel
- C6H14O3
- Molekulargewicht
- 134.17 g/mol
- Exakte Masse
- 134.094294304 Da
- Monoisotopische Masse
- 134.094294304 Da
- XLogP3
- -0,4
- Topologische polare Oberfläche
- 27,7 Ų
- Molekulare Komplexität
- 41,0
- Formale Ladung
- 0
- Wasserstoffbrücken-Donoren
- 0
- Wasserstoffbrücken-Akzeptoren
- 3
- Drehbare Bindungen
- 6
- Schweratome
- 9
- Kovalente Einheiten
- 1
An PubChem gemeldete Namen und Synonyme
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:46784
- ChEMBL:CHEMBL1234162
- EPA DTXSID:DTXSID1024621
- PubMed:22731510
- PubMed:22668072
- PubMed:22667984
- PubMed:22655237
- PubMed:22568515
- PubMed:22524204
- PubMed:22423271
- PubMed:22215139
- PubMed:22193947
- PubMed:22134711
- PubMed:22080539
- PubMed:21957120
Erweiterte Strukturstatistik
- Definierte Atom-Stereozentren
- 0
- Nicht definierte Atom-Stereozentren
- 0
- Definierte Bindungs-Stereozentren
- 0
- Nicht definierte Bindungs-Stereozentren
- 0
- 3D-Pharmakophormerkmale
- 3
- 3D-Ringe
- 0
- 3D-Hydrophobe
- 0
- 3D-Akzeptormerkmale
- 3
- 3D-Donormerkmale
- 0
- 3D-Anionenzentren
- 0
- 3D-Kationenzentren
- 0
- 3D-Konformere
- 10
- Effektive 3D-Rotoren
- 6,0
Maschinenlesbare Strukturkennungen
- SMILES
COCCOCCOC- InChI
InChI=1S/C6H14O3/c1-7-3-5-9-6-4-8-2/h3-6H2,1-2H3- InChIKey
SBZXBUIDTXKZTM-UHFFFAOYSA-N
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 190 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 321 to 324 °F at 760 mmHg ; 241 °F at 200 mmHg; 167 °F at 35 mmHg; 68 °F at 3 mmHg (NTP, 1992) Quelle: CAMEO Chemicals
- Boiling Point: boiling point equals 321 to 324 °F Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Boiling Point: 162 °C at 760 mm Hg; 116 °C at 200 mm Hg; 75 °C at 35 mm Hg; 20 dg C at 3 mm Hg Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 162 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 162 °C @760 [mm Hg] Quelle: PAC Chemical Database, U.S. Department of Energy
- Color/Form: Colorless liquid Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 0.945 at 68 °F (USCG, 1999) - Less dense than water; will float Quelle: CAMEO Chemicals
- Density: Sp gr: 0.9451 at 20 °C/20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 0.95 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 0.9451 @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 153 to 158 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Flash Point: Flash point equals 153 to 158 °F Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 153 °F (67 °C) (CLOSED CUP) Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 51 °C c.c. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- LogP: log Kow = -0.36 Quelle: Hazardous Substances Data Bank (HSDB)
- LogP: -0.36 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -90 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Melting Point: -68 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: -68 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -68 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Odor: Mild odor Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Diethylene glycol dimethyl ether is a colorless watery liquid with a pleasant odor. Floats and mixes with water. (USCG, 1999) Quelle: CAMEO Chemicals
- Physical Description: Liquid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Clear liquid with a pleasant odor; [CAMEO] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Refractive Index: Index of refraction: 1.4097 at 20 °C/D Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible (NTP, 1992) Quelle: CAMEO Chemicals
- Solubility: Miscible with alcohol, ether, hydrocarbon solvents Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in benzene Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, miscible Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: miscible Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 2.96 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: Vapor pressure, kPa at 20 °C: 0.33 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Viscosity: 1.089 cP at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by inhalation of its vapour, by ingestion and through the skin. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
- Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P318, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H226 (93%): Flammable liquid and vapor [Warning Flammable liquids]; H360 (90.8%): May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P318, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 811 reports by companies from 16 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H360: May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Warning Quelle: NITE-CMC
- GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Quelle: NITE-CMC
- NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol dimethyl ether(SRC), using a log Kow of -0.36(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a log Kow of -0.36(2) and a regression-derived equation(3), indicates that diethylene glycol dimethyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol dimethyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 5.2X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 2.96 mm Hg(4), and assigned value for water solubility of 1X10+6 mg/L (miscible)(5). Diethylene glycol dimethyl ether is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). Diethylene glycol dimethyl ether was degraded 33% after 25 days and a 7 day lag period using an activated sludge from an industry producing the chemical(6), indicating that biodegradation may be an important environmental fate process in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a log Kow of -0.36(2) and a regression-derived equation(3), indicates that diethylene glycol dimethyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 5.2X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 2.96 mm Hg(4), and assigned value for water solubility of 1X10+6 mg/L (miscible)(5). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Diethylene glycol dimethyl ether was biodegraded 33% after 25 days and a 7 day lag period using an activated sludge from an industry producing the chemical(8), indicating that biodegradation may be an important environmental fate process in water(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol dimethyl ether, which has a vapor pressure of 2.96 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol dimethyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 hours(SRC), calculated from its rate constant of 1.75X10-11 cu cm/molecule-sec at 25 °C(3). Diethylene glycol dimethyl ether does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight(4). Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Plasticizer; Monomers Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Solvent; Intermediate; Plasticizer; Not Known or Reasonably Ascertainable Quelle: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as a solvent and chemical intermediate; [Merck Index] Used in the coating industry and in photolithography to make semiconductor chips; Also used in adhesives, sealants, and automotive care products; [Reference #1] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Semiconductor Manufacturing [Category: Industry]; Painting (Solvents) [Category: Paint]; Working with Glues and Adhesives [Category: Other] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Solvent; reaction medium for Grignard and similar syntheses. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Diethylene glycol dimethyl ether is used as a solvent in chemical reactions involving metals and organometallic compounds. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Solubilizer Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Used in production of plastics. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Amtliche Quelle und Herkunft
- Registrierte Quelle
- Saudi SFDA prohibited and restricted ingredient lists
- Quellenverweis
- SFDA prohibited list, page 68, row 6
- Eintrags-ID der Quelle
prohibited-67-6- Quellenversion
- live-snapshot-2026-08-30
- Quellsprache
- English
- Übersetzungsstatus
- Original is English
- Stand geprüft
- 2026-08-30 05:18 UTC
- Validierungsmethode
- complete SFDA paginated HTML snapshot; strict page/row counts
- SHA-256
ceb6cc636e6b1f4b3013f88ce0297217b49d6194342c6ece5c03b1e04256d71a
Hinweise zum registrierten Datensatz
- Datensatzabdeckung
- Prohibited and restricted substances with CAS, EC and conditions
- Hinweis zur Behörde
- Official SFDA dated lists; version and hash each release
Wie dieser Eintrag in den Marktdatensatz passt
Statusverteilung
Bedingungstext ist bei 0 von 2090 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.
Saudi Arabia Marktkontext
Complete official list index
Abdeckungsversion: SFDA live prohibited/restricted lists, snapshot 30 August 2026
Every page and entry in the public SFDA prohibited and restricted ingredient indexes; restricted detail pages remain the source for conditions.
Verifizierungs-Checkliste
- Search names and CAS across both SFDA lists.
- Open the cited restricted-entry detail and apply every condition.
- Check current SFDA/GSO technical regulations and updates.
- Complete eCosma notification, label and responsible-party requirements.
Amtliche Marktquellen
- Saudi SFDA prohibited and restricted ingredient listsOfficial SFDA dated lists; version and hash each release
Verifizierungsablauf und Vollständigkeit des Eintrags
Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden
- Bestätigen Sie, dass „bis(2-Methoxyethyl) ether (Dimethoxydiglycol)“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
- Search names and CAS across both SFDA lists.
- Open the cited restricted-entry detail and apply every condition.
- Check current SFDA/GSO technical regulations and updates.
- Complete eCosma notification, label and responsible-party requirements.
- Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.
In diesem Eintrag verfügbare Felder
- Amtlicher StoffnameVerfügbar
- CASVerfügbar
- ECVerfügbar
- Gesonderter BedingungstextIn der Quellzeile nicht vorhanden
- Datum des InkrafttretensNicht angegeben
- Snapshot-Hash und MethodeVerfügbar
Fragen, die diese Seite beantwortet
Dauerhafte Zitierweise
bis(2-Methoxyethyl) ether (Dimethoxydiglycol). SFDA prohibited list, page 68, row 6. Saudi Arabia. Source version live-snapshot-2026-08-30. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/sa/records/10275/
Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.
Auslegung und Grenzen für Saudi Arabia
This official record identifies the substance as prohibited for cosmetic use in the stated market scope.
Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.
Wie die Rechtsrolle auszulegen ist
The cited row forms part of a binding rule or legally incorporated list for this market.
Belege auf dieser Seite
- Erfasstes Ergebnis: Prohibited
- Rechtsrolle: Binding rule
- Quellenversion: live-snapshot-2026-08-30
Was es nicht beweist
No list match is not permission; Gulf/SFDA product, claim, notification and technical requirements still apply.
Weitere maßgebliche Stoffrecherche
Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Diese Identität bei der Quelle recherchierenFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Diese Identität bei der Quelle recherchierenILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Diese Identität bei der Quelle recherchierenJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Diese Identität bei der Quelle recherchierenNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Diese Identität bei der Quelle recherchierenOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Diese Identität bei der Quelle recherchierenUS EPA CompTox CTX APIs
Für den Import ist ein API-Schlüssel erforderlichDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Diese Identität bei der Quelle recherchieren