Zum Hauptinhalt springen
ProhibitedBinding ruleSAOriginal is EnglishImport aus amtlicher Quelle geprüft

2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2]

Listed by the Saudi Food and Drug Authority as prohibited in cosmetic products.

Regulatorische Entscheidung und vollständige Bedingungen

Status
Prohibited
Rechtsrolle
Binding rule
Regulatorische Zusammenfassung
Listed by the Saudi Food and Drug Authority as prohibited in cosmetic products.
Bedingungen und Beschränkungen
A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Öffnen Sie die zitierte Quelle und wenden Sie die unten genannten marktweiten Anforderungen an.

Stoffidentität

Name in der amtlichen Quelle
2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2]
CAS
109-86-4; 110-49-6
EC
203-713-7
Identitätszuordnung
cas_number
Verknüpfter Inhaltsstoff
METHOXYETHANOL

Verknüpfte CosIng-Identitätsdaten

Namen und Aliase

METHOXYETHANOL

CosIng-Beschreibung: Ethylene Glycol Monomethyl Ether Ethanol, 2-Methoxy- Ethylene glycol methyl ether Ethylene Glycol Monomethyl Ether

Beschränkungshinweis aus dem EU-Verzeichnis: II/665 CMR1b (Reprotoxic 1B)

Erfasste kosmetische Funktion: SOLVENT, VISCOSITY CONTROLLING

Funktionsseiten:SOLVENT, VISCOSITY CONTROLLING

Das vollständige Inhaltsstoffprofil ansehen

Marktübergreifende Übersicht zu dieser Identität

Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.

10 Marktdatensätze
Chemische 2D-Struktur aus PubChem für CAS 109-86-4
CAS 109-86-4PubChem CID 8019

Verifizierte Chemie für CAS 109-86-4

2-Methoxyethanol

2-methoxyethanol is a hydroxyether that is ethanol substituted by a methoxy group at position 2. It has a role as a solvent and a protic solvent. — ChEBI

IUPAC-Name
2-methoxyethanol
Summenformel
C3H8O2
Molekulargewicht
76.09 g/mol
Exakte Masse
76.052429494 Da
Monoisotopische Masse
76.052429494 Da
XLogP3
-0,8
Topologische polare Oberfläche
29,5 Ų
Molekulare Komplexität
14,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
1
Wasserstoffbrücken-Akzeptoren
2
Drehbare Bindungen
2
Schweratome
5
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

Methyl cellosolveEthylene glycol monomethyl etherEthanol, 2-methoxy-Methyl oxitol2-Methoxy-1-ethanolDowanol EMMethylglykolEGME
16 weitere gemeldete Namen
Methoxyhydroxyethane3-Oxa-1-butanolMonomethyl glycolGlycol ether EMPristGlycol monomethyl ether1-Hydroxy-2-methoxyethaneJeffersol EMMECSMetil cellosolve2-MetossietanoloAmsco-Solv EE2-Methoxy-aethanolMethylcelosolvmethylcellosolveMetoksyetylowy alkohol
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
3
3D-Ringe
0
3D-Hydrophobe
0
3D-Akzeptormerkmale
2
3D-Donormerkmale
1
3D-Anionenzentren
0
3D-Kationenzentren
0
3D-Konformere
8
Effektive 3D-Rotoren
2,0
Maschinenlesbare Strukturkennungen
SMILES
COCCO
InChI
InChI=1S/C3H8O2/c1-5-3-2-4/h4H,2-3H2,1H3
InChIKey
XNWFRZJHXBZDAG-UHFFFAOYSA-N

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer8019

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • ERG2024, Guide 127 (Ethylene glycol monomethyl ether): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H302: Harmful if swallowed [Warning Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P261, P264, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P317, P318, P321, P330, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (97%): Flammable liquid and vapor [Warning Flammable liquids]; H302+H312+H332 (41.2%): Harmful if swallowed, in contact with skin or if inhaled [Warning Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H302 (96.9%): Harmful if swallowed [Warning Acute toxicity, oral]; H312 (97%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H332 (94.5%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H360 (93.8%): May damage fertility or the unborn child [Danger Reproductive toxicity]; H370 (10.6%): Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373 (14.1%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P308+P316, P317, P318, P319, P321, P330, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1202 reports by companies from 34 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P302+P352, P303+P361+P353, P304+P340, P308+P316, P317, P318, P319, P321, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P302+P352, P303+P361+P353, P304+P340, P308+P316, P316, P317, P318, P319, P321, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Toxicity Summary: IDENTIFICATION AND USE: 2-Methoxyethanol (2-ME) is a colorless liquid with ether-like odor. It is used as a solvent for cellulose acetate, natural and synthetic resins, some alcohol-soluble dyes; in nail polishes, quick-drying varnishes and enamels, and wood stains. It is also used as a as a jet fuel de-icer. HUMAN EXPOSURE AND TOXICITY: The substance is mildly irritating to the eyes and respiratory tract and may cause effects on the central nervous system, blood, bone marrow, kidneys and liver. Exposure at high levels could cause unconsciousness. The liquid defats the skin. Two non-fatal cases of poisoning by consuming 100 mL 2-ME in men aged 41 and 23 were reported. In addition to agitation and confusion, the predominant clinical features were nausea, cyanosis, hyperventilation, slight tachycardia, and metabolic acidosis. In one patient there were suggestions of moderate kidney failure. No evidence of liver damage was found and both patients recovered within 4 weeks. Chronic poisonings from vapors lead to toxic encephalopathy and evidence of bone marrow depression without hemolysis. Lung, kidney and liver changes have been observed. It was found that individuals exposed in utero Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for 2-methyoxyethanol(SRC), using a log Kow of -0.77(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a log Kow of -0.77(2) and a regression-derived equation(3), indicates that 2-methoxyethanol is expected to have very high mobility in soil(SRC). Volatilization of 2-methoxyethanol from moist soil surfaces is expected to be an environmental fate process(SRC) given a Henry's Law constant of 3.3X10-7 atm-cu m/mole(4). The potential for volatilization of 2-methoxyethanol from dry soil surfaces may exist(SRC) based upon a vapor pressure of 9.5 mm Hg(5). Utilizing the Japanese MITI test, 83% of the Theoretical BOD was reached in 2 weeks(6) indicating that biodegradation is an important environmental fate process in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a log Kow of -0.77(2) and a regression-derived equation(3), indicates that 2-methoxyethanol is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces may occur(4) based upon a Henry's Law constant of 3.3X10-7 atm-cu m/mole(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 97 days and 700 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(3), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Utilizing the Japanese MITI test, 83% of the Theoretical BOD was reached in 2 weeks(7) indicating that biodegradation is an important environmental fate process in water(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2-methoxyethanol, which has a vapor pressure of 9.5 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2-methoxyethanol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 31 hours(SRC), calculated from its rate constant of 1.25X10-11 cu cm/molecule-sec at 25 °C(3). 2-Methoxyethanol does not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Solvent; Absorbent; Humectant; Fuel agents; Processing aids not otherwise specified; Adhesion/cohesion promoter; Intermediate Quelle: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: 2-Methoxyethanol Quelle: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used as a solvent for many different purposes, (e.g., varnishes, dyes, and resins) and as a jet deicing additive; [ACGIH] Used in the Asian microelectronics industry in photoresist formulations and in manufacturing copper-laminate circuit boards; [JOEM 2004;46:707-713] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Semiconductor Manufacturing [Category: Industry]; Painting (Solvents) [Category: Paint]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For 2-methoxyethanol (USEPA/OPP Pesticide Code: 042202) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: The active ingredient is no longer contained in any registered products ... "cancelled." Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Solvent for nitrocellulose, ... solvent mixtures, lacquers, ... perfume fixative, ... jet fuel deicing additive. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Solvent for low viscosity cellulose acetate, natural resins, some synthetic resins and some alc-sol dyes; in dyeing leather; sealing moisture-proof cellophane; in nail polishes, quick drying varnishes and enamels, wood stains. In modified Karl Fischer reagent. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for 2-METHOXYETHANOL (8 total), please visit the HSDB record page. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Methyl cellosolve, is a clear and colorless liquid at room temperature mainly used as a solvent. It is used for many purposes including varnishes, dyes, resins, printing, finishing textile, and semiconductor manufacturing. Quelle: Toxin and Toxin Target Database (T3DB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Chemische 2D-Struktur aus PubChem für CAS 110-49-6
CAS 110-49-6PubChem CID 8054

Verifizierte Chemie für CAS 110-49-6

Ethylene glycol monomethyl ether acetate

Ethylene Glycol Monomethyl Ether Acetate can cause developmental toxicity and male reproductive toxicity according to The National Institute for Occupational Safety and Health (NIOSH). — California Office of Environmental Health Hazard Assessment (OEHHA)

IUPAC-Name
2-methoxyethyl acetate
Summenformel
C5H10O3
Molekulargewicht
118.13 g/mol
Exakte Masse
118.062994177 Da
Monoisotopische Masse
118.062994177 Da
XLogP3
0,0
Topologische polare Oberfläche
35,5 Ų
Molekulare Komplexität
70,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
3
Drehbare Bindungen
4
Schweratome
8
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

Methyl glycol acetateMeCsac2-Methoxyethanol acetateMETHYL CELLOSOLVE ACETATEAcetic acid 2-methoxyethyl esterEthanol, 2-methoxy-, acetateMethylglykolacetatAcetyl methyl cellosolve
16 weitere gemeldete Namen
MethylglycolacetateMethylcelosolvacetatMethyl glycol monoacetateEthylene glycol methyl ether acetateGlycol monomethyl ether acetate2-Methoxyethanol, acetate2-Metossietilacetato2-MethoxyaethylacetatEGMEAmethoxyethanol acetateMethylcellosolveacetate2-Methyoxyethylacetate2-Methoxy-ethyl acetaatbeta-Methoxyethyl acetateMethyl cellosolye acetaatAcetate de methyle glycol
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
2
3D-Ringe
0
3D-Hydrophobe
0
3D-Akzeptormerkmale
2
3D-Donormerkmale
0
3D-Anionenzentren
0
3D-Kationenzentren
0
3D-Konformere
10
Effektive 3D-Rotoren
4,0
Maschinenlesbare Strukturkennungen
SMILES
CC(=O)OCCOC
InChI
InChI=1S/C5H10O3/c1-5(6)8-4-3-7-2/h3-4H2,1-2H3
InChIKey
XLLIQLLCWZCATF-UHFFFAOYSA-N

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer8054

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • ERG2024, Guide 129 (Ethylene glycol monomethyl ether acetate): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P261, P264, P270, P271, P280, P301+P317, P302+P352, P304+P340, P317, P318, P321, P330, P362+P364, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (39.6%): Flammable liquid and vapor [Warning Flammable liquids]; H302+H312+H332 (38.6%): Harmful if swallowed, in contact with skin or if inhaled [Warning Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H312 (100%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H332 (100%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H360 (99%): May damage fertility or the unborn child [Danger Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P261, P264, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P317, P318, P321, P330, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 101 reports by companies from 8 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P318, P319, P321, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P273, P280, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P316, P318, P319, P321, P337+P317, P370+P378, P391, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: ... The methyl and ethyl ethers of ethylene glycol, ie 2- methoxyethanol (2-ME) esters, 2-methoxyethyl acetate (2-MEA) and 2-ethoxyethyl acetate (2- EEA) ... are all stable, and are all miscible with (or in the case of 2-EEA very soluble in) water and miscible with a large number of organic solvents. ... The solubility of these glycol ethers in water and their relatively low vapor pressure could result in their build-up in water in the absence of degradation. However, degradation by microorganisms in soil, sewage sludge, and water appears to prevent this possibility. Atmospheric emissions resulting from the use of glycol ethers as evaporative solvents result in the greatest environmental exposure.... Effects on Organisms in the Environment: The toxicity of 2-ME and 2-EE to microorganisms and aquatic animals appears to be low. ... The glycol ether acetates (2-MEA and 2-EEA) are far more toxic to fish. The LC50 of 2-EEA for fathead minnows is 46 mg/L and that of 2-MEA for tidewater silverfish and bluegills is 45 mg/L. ... Effects on Experimental Animals and In Vitro Test Systems: Systemic toxicity: The toxicity of 2-ME and 2-EE to experimental animals has been much more widely studie Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3.2 was calculated for methyl cellosolve acetate(SRC), using an estimated log Kow of 0.10(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests that bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 30(SRC), determined from an estimated log Kow of 0.10(2) and a regression-derived equation(3), indicates that methyl cellosolve acetate is expected to have very high mobility in soil(SRC). Volatilization of methyl cellosolve acetate from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.1X10-6 atm-cu m/mole(SRC) derived from its vapor pressure, 7.0 mm Hg at 20 °C(4), and assigned value for water solubility of 1.0X10+6 mg/L (miscible)(5). The potential for volatilization of methyl cellosolve acetate from dry soil surfaces may exist(SRC) based on its vapor pressure(4). Using aqueous screening tests methyl cellosolve acetate reached 30 to 86.9% of its theoretical BOD over a period of 5 to 14 days(6,7), suggesting that biodegradation may be an important environmental fate process in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 30(SRC), determined from an estimated log Kow of 0.10(2) and a regression-derived equation(3), indicates that methyl cellosolve acetate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 1.1X10-6 atm-cu m/mole(SRC) derived from its vapor pressure, 7.0 mm Hg(4), and assigned value for water solubility of 1.0X10+6 mg/L (miscible)(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 24 days and 270 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3.2(3), from an estimated log Kow(2), and a regression derived equation(7) suggests that bioconcentration in aquatic organisms is low(SRC). Hydrolysis half-lives of 140 and 14 days at pH values of 7 and 8, respectively(10), suggest that hydrolysis is not expected to be an important process except under basic conditions(SRC). Using aqueous screening tests, methyl cellosolve acetate reached 30 to 86.9% of its theoretical BOD over a period of 5 to 14 Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), methyl cellosolve acetate, which has a measured vapor pressure of 7.0 mm Hg at 20 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase methyl cellosolve acetate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 1.1 days(SRC) calculated from its rate constant of 9.7X10-12 cu cm/molecule-sec at 25 °C(SRC)that was derived using a structure estimation method(3). Methyl cellosolve acetate does not contain chromophores that absorb at wavelengths >290 nm(4) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Amtliche Quelle und Herkunft

Registrierte Quelle
Saudi SFDA prohibited and restricted ingredient lists
Quellenverweis
SFDA prohibited list, page 67, row 5
Eintrags-ID der Quelle
prohibited-66-5
Quellenversion
live-snapshot-2026-08-30
Quellsprache
English
Übersetzungsstatus
Original is English
Stand geprüft
2026-08-30 05:18 UTC
Validierungsmethode
complete SFDA paginated HTML snapshot; strict page/row counts
SHA-256
ceb6cc636e6b1f4b3013f88ce0297217b49d6194342c6ece5c03b1e04256d71a

Hinweise zum registrierten Datensatz

Datensatzabdeckung
Prohibited and restricted substances with CAS, EC and conditions
Hinweis zur Behörde
Official SFDA dated lists; version and hash each release

Wie dieser Eintrag in den Marktdatensatz passt

2090
aktuelle Einträge für Saudi Arabia
1726
Einträge mit dem Status Prohibited
2090
Einträge aus dieser Quellenversion
1991
Markteinträge mit CAS-Identität

Statusverteilung

Bedingungstext ist bei 0 von 2090 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.

Saudi Arabia Marktkontext

Complete official list index

Abdeckungsversion: SFDA live prohibited/restricted lists, snapshot 30 August 2026

Every page and entry in the public SFDA prohibited and restricted ingredient indexes; restricted detail pages remain the source for conditions.

Verifizierungs-Checkliste

  1. Search names and CAS across both SFDA lists.
  2. Open the cited restricted-entry detail and apply every condition.
  3. Check current SFDA/GSO technical regulations and updates.
  4. Complete eCosma notification, label and responsible-party requirements.

Amtliche Marktquellen

Verifizierungsablauf und Vollständigkeit des Eintrags

Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden

  1. Bestätigen Sie, dass „2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2]“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
  2. Search names and CAS across both SFDA lists.
  3. Open the cited restricted-entry detail and apply every condition.
  4. Check current SFDA/GSO technical regulations and updates.
  5. Complete eCosma notification, label and responsible-party requirements.
  6. Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.

In diesem Eintrag verfügbare Felder

  • Amtlicher StoffnameVerfügbar
  • CASVerfügbar
  • ECVerfügbar
  • Gesonderter BedingungstextIn der Quellzeile nicht vorhanden
  • Datum des InkrafttretensNicht angegeben
  • Snapshot-Hash und MethodeVerfügbar

Fragen, die diese Seite beantwortet

This official record identifies the substance as prohibited for cosmetic use in the stated market scope. Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. No list match is not permission; Gulf/SFDA product, claim, notification and technical requirements still apply.

Der Eintrag zitiert SFDA prohibited list, page 67, row 5, Quellenversion live-snapshot-2026-08-30. Die amtliche Quelle öffnen.

Nein. CAS hilft bei der Klärung der Identität, aber Rechtsordnungen können denselben Stoff unterschiedlich einstufen und unterschiedliche Produktbereiche, Grenzwerte, Warnhinweise und Übergangsfristen anwenden.

Dauerhafte Zitierweise

2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2]. SFDA prohibited list, page 67, row 5. Saudi Arabia. Source version live-snapshot-2026-08-30. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/sa/records/10264/

Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.

Auslegung und Grenzen für Saudi Arabia

This official record identifies the substance as prohibited for cosmetic use in the stated market scope.

Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

Wie die Rechtsrolle auszulegen ist

The cited row forms part of a binding rule or legally incorporated list for this market.

Belege auf dieser Seite

  • Erfasstes Ergebnis: Prohibited
  • Rechtsrolle: Binding rule
  • Quellenversion: live-snapshot-2026-08-30

Was es nicht beweist

No list match is not permission; Gulf/SFDA product, claim, notification and technical requirements still apply.

Weitere maßgebliche Stoffrecherche

Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Diese Identität bei der Quelle recherchieren

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Diese Identität bei der Quelle recherchieren

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Diese Identität bei der Quelle recherchieren

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Diese Identität bei der Quelle recherchieren

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Diese Identität bei der Quelle recherchieren

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Diese Identität bei der Quelle recherchieren

US EPA CompTox CTX APIs

Für den Import ist ein API-Schlüssel erforderlich

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Diese Identität bei der Quelle recherchieren