Zum Hauptinhalt springen
ProhibitedBinding ruleINOriginal is EnglishImport aus amtlicher Quelle geprüft

Trioxymethylene (1,3,5-trioxan) (CAS No. 110-88-3)

IS 4707 Part 2:2025 Annex A lists this ingredient as one that must not form part of a cosmetic product in India.

Regulatorische Entscheidung und vollständige Bedingungen

Status
Prohibited
Rechtsrolle
Binding rule
Regulatorische Zusammenfassung
IS 4707 Part 2:2025 Annex A lists this ingredient as one that must not form part of a cosmetic product in India.
Bedingungen und Beschränkungen

Must not form part of the composition of cosmetic products. Apply the general trace and safety notes published after Annex A.

Stoffidentität

Name in der amtlichen Quelle
Trioxymethylene (1,3,5-trioxan) (CAS No. 110-88-3)
CAS
110-88-3
EC
Not supplied in this source row
Identitätszuordnung
standalone:official_bis_record

Marktübergreifende Übersicht zu dieser Identität

Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.

9 Marktdatensätze
Chemische 2D-Struktur aus PubChem für CAS 110-88-3
CAS 110-88-3PubChem CID 8081

Verifizierte Chemie für CAS 110-88-3

1,3,5-Trioxane

1,3,5-trioxane is a saturated organic heteromonocyclic parent that is cyclohexane in which the carbon atoms at positions 1, 3 and 5 are replaced by oxygen atoms. It is a saturated organic heteromonocyclic parent and a trioxane. — ChEBI

IUPAC-Name
1,3,5-trioxane
Summenformel
C3H6O3
Molekulargewicht
90.08 g/mol
Exakte Masse
90.031694049 Da
Monoisotopische Masse
90.031694049 Da
XLogP3
-0,4
Topologische polare Oberfläche
27,7 Ų
Molekulare Komplexität
21,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
3
Drehbare Bindungen
0
Schweratome
6
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

s-TrioxaneTrioxymethyleneTrioxaneMetaformaldehydeTriformolFormaldehyde, trimerTrioxansym-Trioxane
16 weitere gemeldete Namen
1,3,5-TrioxacyclohexaneAldeformMarvosans-TrixaneTriossimetileneTrioxymethyleenTrioxymethylenTrioxin1,3,5-Trioxan46BNU65YNYNSC-26347CHEBI:38043RefChem:412664CHEBI:38044203-812-5NSC 26347
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
4
3D-Ringe
1
3D-Hydrophobe
0
3D-Akzeptormerkmale
3
3D-Donormerkmale
0
3D-Anionenzentren
0
3D-Kationenzentren
0
3D-Konformere
1
Effektive 3D-Rotoren
1,2
Maschinenlesbare Strukturkennungen
SMILES
C1OCOCO1
InChI
InChI=1S/C3H6O3/c1-4-2-6-3-5-1/h1-3H2
InChIKey
BGJSXRVXTHVRSN-UHFFFAOYSA-N

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer8081

Attributed physical-property, hazard, environmental and use annotations.

  • Solubility: greater than or equal to 100 mg/mL at 68 °F (NTP, 1992) Quelle: CAMEO Chemicals
  • Solubility: SOL IN WATER: 17.2 G/100 ML @ 18 °C, 21.2 @ 25 °C; EASILY SOL IN ALC, KETONES, ETHER, ACETONE, ORG SOLVENTS, CHLORINATED & AROMATIC HYDROCARBONS; SLIGHTLY SOL IN PENTANE, PETROLEUM ETHER, LOWER PARAFFINS Quelle: Hazardous Substances Data Bank (HSDB)
  • Solubility: SOL IN BENZENE, CARBON TETRACHLORIDE, CHLOROFORM, CARBON DISULFIDE Quelle: Hazardous Substances Data Bank (HSDB)
  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H361d ***: Suspected of damaging the unborn child [Warning Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P240, P241, P261, P271, P280, P304+P340, P318, P319, P370+P378, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H228 (100%): Flammable solid [Danger Flammable solids]; H335 (100%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H361 (99.3%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P240, P241, P261, P271, P280, P304+P340, P318, P319, P370+P378, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 285 reports by companies from 14 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P210, P240, P241, P260, P264, P270, P280, P308+P316, P319, P321, P370+P378, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P271, P280, P304+P340, P318, P319, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Amtliche Quelle und Herkunft

Registrierte Quelle
India BIS IS 4707 cosmetic ingredient standards
Quellenverweis
IS 4707 (Part 2):2025 Annex A, entry 1152
Eintrags-ID der Quelle
annex-a:1152
Quellenversion
IS 4707 (Part 2):2025, fifth revision
Quellsprache
English
Übersetzungsstatus
Original is English
Datum des Inkrafttretens
2025-08-09
Quelle aktualisiert
2025-08-09
Stand geprüft
2026-08-31 15:30 UTC
Validierungsmethode
206 text layers; Annex A 1-1614 and Annex B 1-313 with seven lettered source rows
SHA-256
905dd0326361c53da8a354b948331946951ac3ae27d60d8e2474efb051239603

Hinweise zum registrierten Datensatz

Datensatzabdeckung
Complete current Part 2:2025 Annex A prohibited and Annex B restricted rows; Parts 1, 3 and 4 remain linked official checks
Hinweis zur Behörde
Indian Standards referenced by the cosmetics regulatory framework; use the controlled current editions

Wie dieser Eintrag in den Marktdatensatz passt

1931
aktuelle Einträge für India
1614
Einträge mit dem Status Prohibited
1931
Einträge aus dieser Quellenversion
1836
Markteinträge mit CAS-Identität

Statusverteilung

Bedingungstext ist bei 1931 von 1931 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.

India Marktkontext

Complete current Part 2 dataset plus official workflow for Parts 1, 3 and 4

Abdeckungsversion: Cosmetics Rules 2020 plus current BIS IS 4707 parts (1:2020, 2:2025, 3:2025, 4:2022)

All 1,614 prohibited Annex A rows and 317 numbered/lettered restricted Annex B rows from IS 4707 Part 2:2025; official checks remain for colourants, preservatives and UV filters in Parts 1, 3 and 4.

Verifizierungs-Checkliste

  1. Confirm product class and current Cosmetics Rules/gazette amendments.
  2. Check all applicable parts of IS 4707 by exact identity.
  3. Apply Schedule S/other finished-product standards where relevant.
  4. Verify licence/import registration, labelling and testing requirements.

Amtliche Marktquellen

Verifizierungsablauf und Vollständigkeit des Eintrags

Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden

  1. Bestätigen Sie, dass „Trioxymethylene (1,3,5-trioxan) (CAS No. 110-88-3)“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
  2. Confirm product class and current Cosmetics Rules/gazette amendments.
  3. Check all applicable parts of IS 4707 by exact identity.
  4. Apply Schedule S/other finished-product standards where relevant.
  5. Verify licence/import registration, labelling and testing requirements.
  6. Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.

In diesem Eintrag verfügbare Felder

  • Amtlicher StoffnameVerfügbar
  • CASVerfügbar
  • ECNicht angegeben
  • Gesonderter BedingungstextVerfügbar
  • Datum des InkrafttretensVerfügbar
  • Snapshot-Hash und MethodeVerfügbar

Fragen, die diese Seite beantwortet

This official record identifies the substance as prohibited for cosmetic use in the stated market scope. Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. The standards are separate controlled publications; absence from a locally indexed excerpt is not permission.

Der Eintrag zitiert IS 4707 (Part 2):2025 Annex A, entry 1152, Quellenversion IS 4707 (Part 2):2025, fifth revision. Die amtliche Quelle öffnen.

Nein. CAS hilft bei der Klärung der Identität, aber Rechtsordnungen können denselben Stoff unterschiedlich einstufen und unterschiedliche Produktbereiche, Grenzwerte, Warnhinweise und Übergangsfristen anwenden.

Dauerhafte Zitierweise

Trioxymethylene (1,3,5-trioxan) (CAS No. 110-88-3). IS 4707 (Part 2):2025 Annex A, entry 1152. India. Source version IS 4707 (Part 2):2025, fifth revision. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/in/records/15746/

Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.

Auslegung und Grenzen für India

This official record identifies the substance as prohibited for cosmetic use in the stated market scope.

Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

Wie die Rechtsrolle auszulegen ist

The cited row forms part of a binding rule or legally incorporated list for this market.

Belege auf dieser Seite

  • Erfasstes Ergebnis: Prohibited
  • Rechtsrolle: Binding rule
  • Quellenversion: IS 4707 (Part 2):2025, fifth revision
  • Datum des Inkrafttretens: 2025-08-09

Was es nicht beweist

The standards are separate controlled publications; absence from a locally indexed excerpt is not permission.

Weitere maßgebliche Stoffrecherche

Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Diese Identität bei der Quelle recherchieren

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Diese Identität bei der Quelle recherchieren

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Diese Identität bei der Quelle recherchieren

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Diese Identität bei der Quelle recherchieren

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Diese Identität bei der Quelle recherchieren

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Diese Identität bei der Quelle recherchieren

US EPA CompTox CTX APIs

Für den Import ist ein API-Schlüssel erforderlich

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Diese Identität bei der Quelle recherchieren