Zum Hauptinhalt springen
ProhibitedBinding ruleINOriginal is EnglishImport aus amtlicher Quelle geprüft

-tetramethyl- - methylenedianiline (CAS No. 101-61-1) N,N,N’,N’ 4,4’

IS 4707 Part 2:2025 Annex A lists this ingredient as one that must not form part of a cosmetic product in India.

Regulatorische Entscheidung und vollständige Bedingungen

Status
Prohibited
Rechtsrolle
Binding rule
Regulatorische Zusammenfassung
IS 4707 Part 2:2025 Annex A lists this ingredient as one that must not form part of a cosmetic product in India.
Bedingungen und Beschränkungen

Must not form part of the composition of cosmetic products. Apply the general trace and safety notes published after Annex A.

Stoffidentität

Name in der amtlichen Quelle
-tetramethyl- - methylenedianiline (CAS No. 101-61-1) N,N,N’,N’ 4,4’
CAS
101-61-1
EC
Not supplied in this source row
Identitätszuordnung
standalone:official_bis_record

Marktübergreifende Übersicht zu dieser Identität

Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.

8 Marktdatensätze
Chemische 2D-Struktur aus PubChem für CAS 101-61-1
CAS 101-61-1PubChem CID 7567

Verifizierte Chemie für CAS 101-61-1

Bis(p-(dimethylamino)phenyl)methane

4,4'-Methylenebis(N,N-dimethylaniline) is a diarylmethane. — ChEBI

IUPAC-Name
4-[[4-(dimethylamino)phenyl]methyl]-N,N-dimethylaniline
Summenformel
C17H22N2
Molekulargewicht
254.37 g/mol
Exakte Masse
254.178298710 Da
Monoisotopische Masse
254.178298710 Da
XLogP3
3,9
Topologische polare Oberfläche
6,5 Ų
Molekulare Komplexität
220,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
2
Drehbare Bindungen
4
Schweratome
19
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

4,4'-Methylenebis(N,N-dimethylaniline)Michler's baseMethane baseBis[4-(dimethylamino)phenyl]methaneMichler's hydrideMethylene baseMichler's methaneReduced michler'S ketone
16 weitere gemeldete Namen
4,4'-Bis(dimethylamino)diphenylmethaneArnold's baseTetramethyldiaminodiphenylmethaneBis(4-(N,N-dimethylamino)phenyl)methane4,4'-TetramethyldiaminodiphenylmethaneBaze michlerova4,4'-Methylenebis(N,N-dimethyl)benzenamine4,4'-(Dimethylamino)diphenylmethanep,p-Dimethylaminodiphenylmethanep,p'-Bis(dimethylamino)diphenylmethaneNCI-C01990Diphenylmethane, tetramethyldiamino-p,p-TetramethyldiaminodiphenylmethaneN,N'-Tetramethyldiaminodiphenylmethane4,4'-Methylenebis(N,N-dimethylbenzenamine)BAZE michlerova [Czech]
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
4
3D-Ringe
2
3D-Hydrophobe
0
3D-Akzeptormerkmale
0
3D-Donormerkmale
0
3D-Anionenzentren
0
3D-Kationenzentren
2
3D-Konformere
7
Effektive 3D-Rotoren
4,0
Maschinenlesbare Strukturkennungen
SMILES
CN(C)C1=CC=C(C=C1)CC2=CC=C(C=C2)N(C)C
InChI
InChI=1S/C17H22N2/c1-18(2)16-9-5-14(6-10-16)13-15-7-11-17(12-8-15)19(3)4/h5-12H,13H2,1-4H3
InChIKey
JNRLEMMIVRBKJE-UHFFFAOYSA-N

Belege aus weiteren wissenschaftlichen Datenbanken

EMBL-EBI ChEBI
Exakter KennungstrefferCHEBI:34370

4,4'-Methylenebis(N,N-dimethylaniline)

Rezeptur
C17H22N2
Durchschnittsmasse
254.377 g/mol
Monoisotopische Masse
254.17830 Da
Formale Ladung
0
  • diarylmethane — is a (CHEBI:51614)
  • diarylmethane — is a (CHEBI:51614)
Weitere kuratierte Namen
4,4'-Methylenebis(N,N-dimethylaniline)Michler's base
Querverweise aus dieser Quelle
  • CAS: 101-61-1 — KEGG COMPOUND
  • MANUAL_X_REF: C14135 — KEGG COMPOUND

Zugeordnet durch: Exact CAS cross-reference in the ChEBI compound record. Quelle aktualisiert: 2014-07-28. Abgerufen: 2026-08-31. Quelleneintrag öffnen

NIH PubChem PUG-View
Exakter Kennungstreffer7567

Attributed physical-property, hazard, environmental and use annotations.

  • Density: 1.14 at 68 °F (NTP, 1992) - Denser than water; will sink Quelle: CAMEO Chemicals
  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Quelle: CAMEO Chemicals
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H350 (100%): May cause cancer [Danger Carcinogenicity]; H400 (100%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (100%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P273, P280, P318, P391, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 46 reports by companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H350: May cause cancer [Danger Carcinogenicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P280, P318, P319, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Signal: Warning Quelle: NITE-CMC
  • GHS Hazard Statements: H303: May be harmful if swallowed [Warning Acute toxicity, oral]; H351: Suspected of causing cancer [Warning Carcinogenicity] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P280, P301+P317, P318, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Environmental Bioconcentration: Bis(p-(dimethylamino)phenyl)methane, present at 0.50 and 0.050 mg/L resulted in BCF of 629 and 423, respectively, in fish using carp (Cyprinus carpio) which were exposed over an 4-week period(1). According to a classification scheme(2), these BCF values suggest that bioconcentration in aquatic organisms is high(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), a log Koc of 3.26(2) (Koc of 9,100(SRC)), determined from a structure estimation method(2), indicates that bis(p-(dimethylamino)phenyl)methane is expected to be immobile in soil(SRC). Volatilization of bis(p-(dimethylamino)phenyl)methane from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.2X10-7 atm-cu m/mole(SRC), using a fragment constant estimation method(3). Bis(p-(dimethylamino)phenyl)methane is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 3.3X10-6 mm Hg at 25 °C(SRC), determined from a fragment constant method(4). A 0% of theoretical BOD using activated sludge in the Japanese MITI test(5) suggests that biodegradation is not an important environmental fate process in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), a log Koc of 3.26(2) (Koc of 9,100(SRC)), determined from a structure estimation method(2), indicates that bis(p-(dimethylamino)phenyl)methane is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 1.2X10-7 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(5), BCF values of 423 and 629(8), suggest that bioconcentration in aquatic organisms is high(SRC). A 0% of theoretical BOD using activated sludge in the Japanese MITI test(6) suggests that biodegradation is not an important environmental fate process in water(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), bis(p-(dimethylamino)phenyl)methane, which has an estimated vapor pressure of 3.3X10-6 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase bis(p-(dimethylamino)phenyl)methane is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 1 hour(SRC), calculated from its rate constant of 2.1X10-10 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase bis(p-dimethylamino)phenyl)methane may be removed from the air by wet or dry deposition(SRC). Bis(p-dimethylamino)phenyl)methane does not contain chromophores that absorb at wavelengths >290 nm(4), and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
EMBL-EBI ChEBIExakter Treffer2026-08-31
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Amtliche Quelle und Herkunft

Registrierte Quelle
India BIS IS 4707 cosmetic ingredient standards
Quellenverweis
IS 4707 (Part 2):2025 Annex A, entry 1138
Eintrags-ID der Quelle
annex-a:1138
Quellenversion
IS 4707 (Part 2):2025, fifth revision
Quellsprache
English
Übersetzungsstatus
Original is English
Datum des Inkrafttretens
2025-08-09
Quelle aktualisiert
2025-08-09
Stand geprüft
2026-08-31 15:30 UTC
Validierungsmethode
206 text layers; Annex A 1-1614 and Annex B 1-313 with seven lettered source rows
SHA-256
905dd0326361c53da8a354b948331946951ac3ae27d60d8e2474efb051239603

Hinweise zum registrierten Datensatz

Datensatzabdeckung
Complete current Part 2:2025 Annex A prohibited and Annex B restricted rows; Parts 1, 3 and 4 remain linked official checks
Hinweis zur Behörde
Indian Standards referenced by the cosmetics regulatory framework; use the controlled current editions

Wie dieser Eintrag in den Marktdatensatz passt

1931
aktuelle Einträge für India
1614
Einträge mit dem Status Prohibited
1931
Einträge aus dieser Quellenversion
1836
Markteinträge mit CAS-Identität

Statusverteilung

Bedingungstext ist bei 1931 von 1931 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.

India Marktkontext

Complete current Part 2 dataset plus official workflow for Parts 1, 3 and 4

Abdeckungsversion: Cosmetics Rules 2020 plus current BIS IS 4707 parts (1:2020, 2:2025, 3:2025, 4:2022)

All 1,614 prohibited Annex A rows and 317 numbered/lettered restricted Annex B rows from IS 4707 Part 2:2025; official checks remain for colourants, preservatives and UV filters in Parts 1, 3 and 4.

Verifizierungs-Checkliste

  1. Confirm product class and current Cosmetics Rules/gazette amendments.
  2. Check all applicable parts of IS 4707 by exact identity.
  3. Apply Schedule S/other finished-product standards where relevant.
  4. Verify licence/import registration, labelling and testing requirements.

Amtliche Marktquellen

Verifizierungsablauf und Vollständigkeit des Eintrags

Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden

  1. Bestätigen Sie, dass „-tetramethyl- - methylenedianiline (CAS No. 101-61-1) N,N,N’,N’ 4,4’“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
  2. Confirm product class and current Cosmetics Rules/gazette amendments.
  3. Check all applicable parts of IS 4707 by exact identity.
  4. Apply Schedule S/other finished-product standards where relevant.
  5. Verify licence/import registration, labelling and testing requirements.
  6. Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.

In diesem Eintrag verfügbare Felder

  • Amtlicher StoffnameVerfügbar
  • CASVerfügbar
  • ECNicht angegeben
  • Gesonderter BedingungstextVerfügbar
  • Datum des InkrafttretensVerfügbar
  • Snapshot-Hash und MethodeVerfügbar

Fragen, die diese Seite beantwortet

This official record identifies the substance as prohibited for cosmetic use in the stated market scope. Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. The standards are separate controlled publications; absence from a locally indexed excerpt is not permission.

Der Eintrag zitiert IS 4707 (Part 2):2025 Annex A, entry 1138, Quellenversion IS 4707 (Part 2):2025, fifth revision. Die amtliche Quelle öffnen.

Nein. CAS hilft bei der Klärung der Identität, aber Rechtsordnungen können denselben Stoff unterschiedlich einstufen und unterschiedliche Produktbereiche, Grenzwerte, Warnhinweise und Übergangsfristen anwenden.

Dauerhafte Zitierweise

-tetramethyl- - methylenedianiline (CAS No. 101-61-1) N,N,N’,N’ 4,4’. IS 4707 (Part 2):2025 Annex A, entry 1138. India. Source version IS 4707 (Part 2):2025, fifth revision. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/in/records/15732/

Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.

Auslegung und Grenzen für India

This official record identifies the substance as prohibited for cosmetic use in the stated market scope.

Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

Wie die Rechtsrolle auszulegen ist

The cited row forms part of a binding rule or legally incorporated list for this market.

Belege auf dieser Seite

  • Erfasstes Ergebnis: Prohibited
  • Rechtsrolle: Binding rule
  • Quellenversion: IS 4707 (Part 2):2025, fifth revision
  • Datum des Inkrafttretens: 2025-08-09

Was es nicht beweist

The standards are separate controlled publications; absence from a locally indexed excerpt is not permission.

Weitere maßgebliche Stoffrecherche

Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Diese Identität bei der Quelle recherchieren

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Diese Identität bei der Quelle recherchieren

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Diese Identität bei der Quelle recherchieren

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Diese Identität bei der Quelle recherchieren

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Diese Identität bei der Quelle recherchieren

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Diese Identität bei der Quelle recherchieren

US EPA CompTox CTX APIs

Für den Import ist ein API-Schlüssel erforderlich

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Diese Identität bei der Quelle recherchieren