Zum Hauptinhalt springen
ProhibitedBinding ruleINOriginal is EnglishImport aus amtlicher Quelle geprüft

Dimethylamine (CAS No. 124-40-3)

IS 4707 Part 2:2025 Annex A lists this ingredient as one that must not form part of a cosmetic product in India.

Regulatorische Entscheidung und vollständige Bedingungen

Status
Prohibited
Rechtsrolle
Binding rule
Regulatorische Zusammenfassung
IS 4707 Part 2:2025 Annex A lists this ingredient as one that must not form part of a cosmetic product in India.
Bedingungen und Beschränkungen

Must not form part of the composition of cosmetic products. Apply the general trace and safety notes published after Annex A.

Stoffidentität

Name in der amtlichen Quelle
Dimethylamine (CAS No. 124-40-3)
CAS
124-40-3
EC
Not supplied in this source row
Identitätszuordnung
standalone:official_bis_record

Marktübergreifende Übersicht zu dieser Identität

Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.

10 Marktdatensätze
Chemische 2D-Struktur aus PubChem für CAS 124-40-3
CAS 124-40-3PubChem CID 674

Verifizierte Chemie für CAS 124-40-3

Dimethylamine

Dimethylamine is a secondary aliphatic amine where both N-substituents are methyl. It has a role as a metabolite. It is a member of methylamines and a secondary aliphatic amine. It is a conjugate base of a dimethylaminium. — ChEBI

IUPAC-Name
N-methylmethanamine
Summenformel
C2H7N
Molekulargewicht
45.08 g/mol
Exakte Masse
45.057849228 Da
Monoisotopische Masse
45.057849228 Da
XLogP3
-0,2
Topologische polare Oberfläche
12,0 Ų
Molekulare Komplexität
2,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
1
Wasserstoffbrücken-Akzeptoren
1
Drehbare Bindungen
0
Schweratome
3
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

N,N-DimethylamineMethanamine, N-methyl-Dimethylamine (anhydrous)RCRA waste number U092Ai3-15638-XARQ8157E0QDimethylamine, anhydrousNSC-8650
16 weitere gemeldete Namen
CHEBI:17170methanamine, N-methylRefChem:5765204-697-4Dimethylamine anhydrousDIMETHYLAMINE-N-D1(CH3)2NHDimethylamine aqNSC 8650HNMe2Me2NHDimethylamine (40% aq.)Dimethylamine (~2.0 M in THF)Dimethylamine, 40% aqueous solutiondimethyl amine917-72-6
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
2
3D-Ringe
0
3D-Hydrophobe
0
3D-Akzeptormerkmale
0
3D-Donormerkmale
1
3D-Anionenzentren
0
3D-Kationenzentren
1
3D-Konformere
1
Effektive 3D-Rotoren
0,0
Maschinenlesbare Strukturkennungen
SMILES
CNC
InChI
InChI=1S/C2H7N/c1-3-2/h3H,1-2H3
InChIKey
ROSDSFDQCJNGOL-UHFFFAOYSA-N

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer674

Attributed physical-property, hazard, environmental and use annotations.

  • Physical Description: Dimethylamine, anhydrous appears as a colorless gas smelling of fish at low concentrations and of ammonia at higher concentrations. Shipped as a liquid under its vapor pressure. Contact with the unconfined liquid can cause frostbite by evaporative cooling and chemical type burns. The gas, which is corrosive, dissolves readily in water to form flammable corrosive solutions. The gas is heavier than air and can asphyxiate by the displacement of air. Gas is easily ignited and produces toxic oxides of nitrogen when burned. Long-term inhalation of low concentrations or short-term inhalation of low concentrations has adverse health effects. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. Used to make other chemicals and as a solvent. Quelle: CAMEO Chemicals
  • Physical Description: Dimethylamine, aqueous solution appears as a solution of a gas in water. Odor ranging from a fishlike to ammonia-like depending on vapor concentration. Corrosive to skin and eyes. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Quelle: CAMEO Chemicals
  • Physical Description: Gas Vapor; Liquid; Liquid Quelle: EPA Chemical Data Reporting (CDR)
  • Physical Description: Colorless gas with an ammonia- or fish-like odor; Note: A liquid below 44 degrees F. Shipped as a liquefied compressed gas; [NIOSH] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Physical Description: Liquid Quelle: Human Metabolome Database (HMDB)
  • Physical Description: COLOURLESS COMPRESSED LIQUEFIED GAS WITH PUNGENT ODOUR. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
  • Physical Description: SOLUTION IN WATER WITH PUNGENT ODOUR. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
  • Physical Description: Colorless gas with an ammonia- or fish-like odor. Quelle: Occupational Safety and Health Administration (OSHA)
  • Physical Description: Colorless gas with an ammonia- or fish-like odor. [Note: A liquid below 44 °F. Shipped as a liquefied compressed gas.] Quelle: The National Institute for Occupational Safety and Health (NIOSH)
  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: CAUTION: Exposure of skin to compressed gases may result in freezing of the skin. Treatment for frostbite may be necessary. Remove the victim from the source of contamination. IMMEDIATELY wash affected areas gently with COLD water (and soap, if necessary) while removing and isolating all contaminated clothing. Dry carefully with clean, soft towels. If symptoms such as inflammation or irritation develop, IMMEDIATELY call a physician or go to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a ho Quelle: CAMEO Chemicals
  • First Aid: Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]:; Refer to the "General First Aid" section. Specific First Aid: For corrosives, in case of contact, immediately flush skin or eyes with running water for at least 30 minutes. Additional flushing may be required. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. (ERG, 2024) Quelle: CAMEO Chemicals
  • ERG2024, Guide 132 (Dimethylamine, aqueous solution; Dimethylamine, solution): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • ERG2024, Guide 118 (Dimethylamine, anhydrous): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately (liquid)/Frostbite; Skin: Water flush immediately (liquid)/Frostbite; Breathing: Respiratory support Quelle: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H220: Extremely flammable gas [Danger Flammable gases]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P222, P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P354+P338, P317, P319, P321, P332+P317, P362+P364, P377, P381, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H224: Extremely flammable liquid and vapor [Danger Flammable liquids]; H302: Harmful if swallowed [Warning Acute toxicity, oral]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+P317, P301+P330+P331, P302+P361+P354, P303+P361+P353, P304+P340, P305+P354+P338, P316, P317, P321, P330, P363, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H220 (65.5%): Extremely flammable gas [Danger Flammable gases]; H224 (47.3%): Extremely flammable liquid and vapor [Danger Flammable liquids]; H280 (30.1%): Contains gas under pressure; may explode if heated [Warning Gases under pressure]; H302 (47.1%): Harmful if swallowed [Warning Acute toxicity, oral]; H314 (47.1%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H315 (66.1%): Causes skin irritation [Warning Skin corrosion/irritation]; H318 (88.7%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H332 (99.4%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (92.5%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H411 (12.8%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard]; H412 (33.3%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P222, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P273, P280, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P303+P361+P353, P304+P340, P305+P354+P338, P316, P317, P319, P321, P330, P332+P317, P362+P364, P363, P370+P378, P377, P381, P391, P403, P403+P233, P403+P235, P405, P410+P403, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 3043 reports by companies from 43 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H220: Extremely flammable gas [Danger Flammable gases]; H280: Contains gas under pressure; may explode if heated [Warning Gases under pressure]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P222, P260, P261, P264, P264+P265, P270, P271, P272, P273, P280, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P308+P316, P316, P317, P319, P321, P333+P317, P362+P364, P363, P377, P381, P403, P403+P233, P405, P410+P403, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Health Effects: Chronic exposure to uremic toxins can lead to a number of conditions including renal damage, chronic kidney disease and cardiovascular disease. Quelle: Toxin and Toxin Target Database (T3DB)
  • Toxicity Summary: IDENTIFICATION AND USE: Dimethylamine (DMA) is a colorless gas. It is used as acid-gas absorbent, solvent antioxidants, manufacture of dimethylformamide and dimethylacetamide, dyes, flotation agent, gasoline stabilizers, pharmaceuticals, textile chemicals, rubber accelerators, electroplating, dehairing agent, missile fuels, pesticide propellant, rocket propellants, surfactants, reagent for magnesium. HUMAN STUDIES: Workers in a foundry complaining of breathlessness and choking were found to be exposed to 1-46 mg/cu m DMA in the air. Vision has become misty and halos have appeared several hours after workmen have been exposed to the vapors of DMA at concentration too low to cause discomfort or disability during several hours of exposure. The edema of the corneal epithelium, which is principally responsible for the disturbance of vision, clears spontaneously by the next day, but after exceptionally intense exposures the edema and blurring have taken several days to clear and have been accompanied by photophobia and discomfort from roughness of the corneal surface. ANIMAL STUDIES: A 6% solution of DMA, when applied to the skin of rabbits, caused reddening, then thickening and ulcerati Quelle: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Uremic toxins such as dimethylamine are actively transported into the kidneys via organic ion transporters (especially OAT3). Increased levels of uremic toxins can stimulate the production of reactive oxygen species. This seems to be mediated by the direct binding or inhibition by uremic toxins of the enzyme NADPH oxidase (especially NOX4 which is abundant in the kidneys and heart) (A7868). Reactive oxygen species can induce several different DNA methyltransferases (DNMTs) which are involved in the silencing of a protein known as KLOTHO. KLOTHO has been identified as having important roles in anti-aging, mineral metabolism, and vitamin D metabolism. A number of studies have indicated that KLOTHO mRNA and protein levels are reduced during acute or chronic kidney diseases in response to high local levels of reactive oxygen species (A7869) Quelle: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for dimethylamine(SRC), using a log Kow of -0.38(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), a mean Koc value of 434.9 measured in 5 soils(2), indicates that dimethylamine is expected to have moderate mobility in soil(SRC). The pKa of dimethylamine is 10.73(3), indicating that this compound will exist almost entirely in cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of the cation from moist soil is not expected because cations do not volatilize(SRC). Dimethylamine is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1520 mm Hg at 25 °C(5). Dimethylamine was biodegraded 69-89% in three Saskatchewan soils during a 7 day incubation period(6), suggesting that biodegradation may be an important environmental fate process in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), a measured Koc value of 508 in lake sediment(2), indicates that dimethylamine is expected to adsorb to suspended solids and sediment(SRC). A pKa of 10.73(3) indicates dimethylamine will exist almost entirely in the cation form at pH values of 5 to 9 and, therefore, volatilization from water surfaces is not expected to be an important fate process(SRC). Dimethylamine is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(4). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow of -0.38(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low. Dimethylamine is expected to biodegrade in water based on a half-life of 1.6 days in Vistula River water (Warsaw, Poland) following a 0.3 day lag period(8). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dimethylamine, which has a vapor pressure of 1520 mm Hg at 25 °C(2), is expected to exist solely as a gas in the ambient atmosphere. Gas-phase dimethylamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 6 hours(SRC), calculated from its rate constant of 6.54X10-11 cu cm/molecule-sec at 25 °C(3). Dimethylamine does not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Binder; Not Known or Reasonably Ascertainable; Soil amendments (fertilizers); pH regulating agent; Intermediate Quelle: EPA Chemical Data Reporting (CDR)
  • Sources/Uses: Used as an accelerator in the manufacturing of rubber, detergents, and pesticides; Used in leather tanning; Urinary excretion in humans increased after eating certain fish, meat, dairy, and grains containing DMA; [ACGIH] Used in electroplating, epoxy resin curing, textile manufacturing, photographic processing, hide dehairing, and pharmaceutical production; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Electroplating [Category: Plate]; Textiles (Fiber & Fabric Manufacturing) [Category: Industry]; Plastic Composites Manufacturing [Category: Industry]; Leather Tanning and Processing [Category: Industry]; Photographic Processing [Category: Other] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: It is used ... for the production of the solvents dimethylformamide (DMF) and dimethylacetamide (DMAC), for water-treating agents, surfactants, rubber-processing compounds, and a range of agrochemicals. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: As accelerator in vulcanizing rubber, tanning, manufacturing detergent soaps, or attracting boll weevils to exterminate them /former use/. As reagent for magnesium. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Acid-gas absorbent, solvent antioxidants, manufacture of dimethylformamide and dimethylacetamide, dyes, flotation agent, gasoline stabilizers, pharmaceuticals, textile chemicals, rubber accelerators, electroplating, dehairing agent, missile fuels, pesticide propellant, rocket propellants, surfactants, reagent for magnesium. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Use as an antiknock agent in fuels. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Chemical intermediate in pesticide production, solvents, surfactants, rubber processing, and epoxy resin accelerators. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Naturally produced by the body (endogenous). Quelle: Toxin and Toxin Target Database (T3DB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Amtliche Quelle und Herkunft

Registrierte Quelle
India BIS IS 4707 cosmetic ingredient standards
Quellenverweis
IS 4707 (Part 2):2025 Annex A, entry 140
Eintrags-ID der Quelle
annex-a:140
Quellenversion
IS 4707 (Part 2):2025, fifth revision
Quellsprache
English
Übersetzungsstatus
Original is English
Datum des Inkrafttretens
2025-08-09
Quelle aktualisiert
2025-08-09
Stand geprüft
2026-08-31 15:30 UTC
Validierungsmethode
206 text layers; Annex A 1-1614 and Annex B 1-313 with seven lettered source rows
SHA-256
905dd0326361c53da8a354b948331946951ac3ae27d60d8e2474efb051239603

Hinweise zum registrierten Datensatz

Datensatzabdeckung
Complete current Part 2:2025 Annex A prohibited and Annex B restricted rows; Parts 1, 3 and 4 remain linked official checks
Hinweis zur Behörde
Indian Standards referenced by the cosmetics regulatory framework; use the controlled current editions

Wie dieser Eintrag in den Marktdatensatz passt

1931
aktuelle Einträge für India
1614
Einträge mit dem Status Prohibited
1931
Einträge aus dieser Quellenversion
1836
Markteinträge mit CAS-Identität

Statusverteilung

Bedingungstext ist bei 1931 von 1931 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.

India Marktkontext

Complete current Part 2 dataset plus official workflow for Parts 1, 3 and 4

Abdeckungsversion: Cosmetics Rules 2020 plus current BIS IS 4707 parts (1:2020, 2:2025, 3:2025, 4:2022)

All 1,614 prohibited Annex A rows and 317 numbered/lettered restricted Annex B rows from IS 4707 Part 2:2025; official checks remain for colourants, preservatives and UV filters in Parts 1, 3 and 4.

Verifizierungs-Checkliste

  1. Confirm product class and current Cosmetics Rules/gazette amendments.
  2. Check all applicable parts of IS 4707 by exact identity.
  3. Apply Schedule S/other finished-product standards where relevant.
  4. Verify licence/import registration, labelling and testing requirements.

Amtliche Marktquellen

Verifizierungsablauf und Vollständigkeit des Eintrags

Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden

  1. Bestätigen Sie, dass „Dimethylamine (CAS No. 124-40-3)“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
  2. Confirm product class and current Cosmetics Rules/gazette amendments.
  3. Check all applicable parts of IS 4707 by exact identity.
  4. Apply Schedule S/other finished-product standards where relevant.
  5. Verify licence/import registration, labelling and testing requirements.
  6. Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.

In diesem Eintrag verfügbare Felder

  • Amtlicher StoffnameVerfügbar
  • CASVerfügbar
  • ECNicht angegeben
  • Gesonderter BedingungstextVerfügbar
  • Datum des InkrafttretensVerfügbar
  • Snapshot-Hash und MethodeVerfügbar

Fragen, die diese Seite beantwortet

This official record identifies the substance as prohibited for cosmetic use in the stated market scope. Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. The standards are separate controlled publications; absence from a locally indexed excerpt is not permission.

Der Eintrag zitiert IS 4707 (Part 2):2025 Annex A, entry 140, Quellenversion IS 4707 (Part 2):2025, fifth revision. Die amtliche Quelle öffnen.

Nein. CAS hilft bei der Klärung der Identität, aber Rechtsordnungen können denselben Stoff unterschiedlich einstufen und unterschiedliche Produktbereiche, Grenzwerte, Warnhinweise und Übergangsfristen anwenden.

Dauerhafte Zitierweise

Dimethylamine (CAS No. 124-40-3). IS 4707 (Part 2):2025 Annex A, entry 140. India. Source version IS 4707 (Part 2):2025, fifth revision. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/in/records/14734/

Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.

Auslegung und Grenzen für India

This official record identifies the substance as prohibited for cosmetic use in the stated market scope.

Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

Wie die Rechtsrolle auszulegen ist

The cited row forms part of a binding rule or legally incorporated list for this market.

Belege auf dieser Seite

  • Erfasstes Ergebnis: Prohibited
  • Rechtsrolle: Binding rule
  • Quellenversion: IS 4707 (Part 2):2025, fifth revision
  • Datum des Inkrafttretens: 2025-08-09

Was es nicht beweist

The standards are separate controlled publications; absence from a locally indexed excerpt is not permission.

Weitere maßgebliche Stoffrecherche

Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Diese Identität bei der Quelle recherchieren

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Diese Identität bei der Quelle recherchieren

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Diese Identität bei der Quelle recherchieren

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Diese Identität bei der Quelle recherchieren

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Diese Identität bei der Quelle recherchieren

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Diese Identität bei der Quelle recherchieren

US EPA CompTox CTX APIs

Für den Import ist ein API-Schlüssel erforderlich

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Diese Identität bei der Quelle recherchieren