Zum Hauptinhalt springen
Permitted list with conditionsBinding ruleASEANOriginal is EnglishImport aus amtlicher Quelle geprüft

Hexamethylenetetramine (methenamine) (INN) CAS No. 100-97-0

ASEAN Annex VI lists this record among preservatives allowed for cosmetic use. Member-state transition rules and deviations still require local verification.

Regulatorische Entscheidung und vollständige Bedingungen

Status
Permitted list with conditions
Rechtsrolle
Binding rule
Regulatorische Zusammenfassung
ASEAN Annex VI lists this record among preservatives allowed for cosmetic use. Member-state transition rules and deviations still require local verification.
Bedingungen und Beschränkungen

0.15%

Stoffidentität

Name in der amtlichen Quelle
Hexamethylenetetramine (methenamine) (INN) CAS No. 100-97-0
CAS
100-97-0
EC
202-905-8
Identitätszuordnung
cas_number
Verknüpfter Inhaltsstoff
METHENAMINE

Verknüpfte CosIng-Identitätsdaten

Namen und Aliase

METHENAMINEmethenamine

CosIng-Beschreibung: 1,3,5,7-Tetraazatricyclo[3.3.1.1(3,7)]decane

Beschränkungshinweis aus dem EU-Verzeichnis: V/30

Erfasste kosmetische Funktion: ANTIMICROBIAL, PRESERVATIVE

Funktionsseiten:ANTIMICROBIAL, PRESERVATIVE

Das vollständige Inhaltsstoffprofil ansehen

Marktübergreifende Übersicht zu dieser Identität

Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.

7 Marktdatensätze
Chemische 2D-Struktur aus PubChem für CAS 100-97-0
CAS 100-97-0PubChem CID 4101

Verifizierte Chemie für CAS 100-97-0

Hexamethylenetetramine

Hexamethylenetetramine is a polycyclic cage that is adamantane in which the carbon atoms at positions 1, 3, 5 and 7 are replaced by nitrogen atoms. It has a role as an antibacterial drug. It is a polycyclic cage, a tetramine and a polyazaalkane. — ChEBI

IUPAC-Name
1,3,5,7-tetrazatricyclo[3.3.1.13,7]decane
Summenformel
C6H12N4
Molekulargewicht
140.19 g/mol
Exakte Masse
140.106196400 Da
Monoisotopische Masse
140.106196400 Da
XLogP3
0,3
Topologische polare Oberfläche
13,0 Ų
Molekulare Komplexität
84,0
Formale Ladung
0
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
4
Drehbare Bindungen
0
Schweratome
10
Kovalente Einheiten
1

An PubChem gemeldete Namen und Synonyme

methenamineHexamineUrotropineUrotropin1,3,5,7-TetraazaadamantaneUritoneHMTAHexamethylenamine
16 weitere gemeldete Namen
FormamineHexamethylene tetramineMethenaminAmmoformCystaminCystogenAmmonioformaldehydeForminAceto HMTHexamethylenetetraamineAminoformaldehydePreparation AFAntihydralDuirexolHexaformMetenamina
Kennungen in externen Datenbanken
Erweiterte Strukturstatistik
Definierte Atom-Stereozentren
0
Nicht definierte Atom-Stereozentren
0
Definierte Bindungs-Stereozentren
0
Nicht definierte Bindungs-Stereozentren
0
3D-Pharmakophormerkmale
8
3D-Ringe
4
3D-Hydrophobe
0
3D-Akzeptormerkmale
0
3D-Donormerkmale
0
3D-Anionenzentren
0
3D-Kationenzentren
4
3D-Konformere
1
Effektive 3D-Rotoren
1,2
Maschinenlesbare Strukturkennungen
SMILES
C1N2CN3CN1CN(C2)C3
InChI
InChI=1S/C6H12N4/c1-7-2-9-4-8(1)5-10(3-7)6-9/h1-6H2
InChIKey
VKYKSIONXSXAKP-UHFFFAOYSA-N

Belege aus weiteren wissenschaftlichen Datenbanken

EMBL-EBI ChEBI
Exakter KennungstrefferCHEBI:6824

hexamethylenetetramine

A polycyclic cage that is adamantane in which the carbon atoms at positions 1, 3, 5 and 7 are replaced by nitrogen atoms.

Rezeptur
C6H12N4
Durchschnittsmasse
140.190 g/mol
Monoisotopische Masse
140.10620 Da
Formale Ladung
0
  • polycyclic cage — is a (CHEBI:33640)
  • polyazaalkane — is a (CHEBI:39474)
  • tetramine — is a (CHEBI:39166)
  • antibacterial drug — has role (CHEBI:36047)
  • antibacterial agent — has role (CHEBI:33282)
  • antibacterial drug — has role (CHEBI:36047)
  • antibacterial agent — has role (CHEBI:33282)
  • polycyclic cage — is a (CHEBI:33640)
  • polyazaalkane — is a (CHEBI:39474)
  • tetramine — is a (CHEBI:39166)
Weitere kuratierte Namen
1,3,5,7-tetraazaadamantane1,3,5,7-tetraazatricyclo[3.3.1.1(3,7)]decaneAminoformE-239E239hexamethylenaminehexamethylene tetraminehexamethylenetetramineHexamethylentetraminhexamethylentetraminumhexaminehexaminumHMTHMTAINS-239INS NO.239methenamineNSC-26346NSC-403347
Querverweise aus dieser Quelle
  • CAS: 100-97-0 — ChemIDplus
  • CAS: 100-97-0 — NIST Chemistry WebBook
  • REGISTRY_NUMBER: 2018 — Reaxys
  • REGISTRY_NUMBER: 26964 — Gmelin
  • MANUAL_X_REF: 3344 — DrugCentral
  • MANUAL_X_REF: D00393 — KEGG DRUG
  • MANUAL_X_REF: HMDB0029598 — HMDB
  • MANUAL_X_REF: LSM-5440 — LINCS
  • MANUAL_X_REF: Methenamine — Wikipedia
  • MANUAL_X_REF: US2762799 — Patent
  • MANUAL_X_REF: US2762800 — Patent

Zugeordnet durch: Exact CAS cross-reference in the ChEBI compound record. Quelle aktualisiert: 2017-02-22. Abgerufen: 2026-08-31. Quelleneintrag öffnen

NIH PubChem PUG-View
Exakter Kennungstreffer4101

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • ERG2024, Guide 133 (Hexamethylenetetramine): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • Signal: Warning Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P210, P240, P241, P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, P370+P378, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H228 (100%): Flammable solid [Danger Flammable solids]; H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P240, P241, P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, P370+P378, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1051 reports by companies from 19 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H334 (100%): May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H351 (100%): Suspected of causing cancer [Warning Carcinogenicity] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P270, P271, P272, P280, P284, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P318, P321, P330, P333+P317, P342+P316, P362+P364, P363, P403, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 39 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Cosmetic Ingredient Review Conclusion: On the basis of the animal and clinical data presented in this report, the CIR Expert Panel concludes that Methenamine is safe for cosmetic use at concentrations not to exceed 0.16% in formulation. It cannot be concluded that Methenamine is safe for use in cosmetic products intended to be aerosolized. Quelle: Cosmetic Ingredient Review (CIR)
  • Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Quelle: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: IDENTIFICATION AND USE: Methenamine is a white or colorless crystalline solid. It is an anti-infective agent. Methenamine hippurate tablets, USP are indicated for prophylactic or suppressive treatment of frequently recurring urinary tract infections when long-term therapy is considered necessary. Non-medical uses include the following: in adhesives, coatings, and sealing compounds; as cross-linking agent for hardening phenol-formaldehyde resin and vulcanizing rubber; as corrosion inhibitor for steel; as fuel tablets for camping stoves; as stabilizer for lubricating and insulating oils; in the chemical detection of metals; in the preservation of hides; as dye fixative; for the manufacture of explosive compounds; antimicrobial food additive. HUMAN EXPOSURE AND TOXICITY: GI distress frequently is caused by doses >500 mg four times a day, even with enteric coated tablets. Painful and frequent micturition, albuminuria, hematuria, and rashes may result from doses of 4 to 8 g/day given for longer than 3-4 weeks. Inhalation may cause asthma-like reactions in previously sensitized individuals. Vapors or solutions have produced skin irritation. Methenamine does not appear to be linked to con Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for methenamine(SRC), using a log Kow of -2.18(1) and a regression-derived equation(2). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that methenamine is expected to have very high mobility in soil(SRC). The pKa of methenamine is 4.89(3), indicating that this compound will exist partially in cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of methenamine from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.7X10-10 atm-cu m/mole(SRC), derived from its vapor pressure, 6.1X10-4 mm Hg(5), and water solubility, 3.02X10+5 mg/L(6). Methenamine is not expected to volatilize from dry soil surfaces based on its vapor pressure(SRC). Various biolodegradation screening studies have observed between 28-100% degradation of methenamine(7) suggesting that biodegradation is an important environmental fate process in soil(SRC). However, part (or most) of the degradation may be explained by hydrolysis to form formaldehyde and ammonia followed by biodegradation with the degradation rate increasing wi Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that methenamine is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 3.7X10-10 atm-cu m/mole(SRC), derived from its vapor pressure, 6.1X10-4 mm Hg(4), and water solubility, 3.02X10+5 mg/L(5). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow of -2.18(7) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Various biolodegradation screening studies have observed between 28-100% degradation of methenamine(8) suggesting that biodegradation is an important environmental fate process in soil(SRC). However, part (or most) of the degradation may be explained by hydrolysis to form formaldehyde and ammonia followed by biodegradation with the degradation rate increasing with acidity(8). Aqueous hydrolysis half-lives of 13.8 hours and 1.6 hours have been measured at 37.5 °C and pH 5.8 and pH 2 respectively(9). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), methenamine, which has a vapor pressure of 6.1X10-4 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase methenamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 45 minutes(SRC), calculated from its rate constant of 5.1X10-10 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase methenamine may be removed from the air by wet and dry deposition(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Chemical reaction regulator; Monomers; Processing aids not otherwise specified; Binder; Other; Energy Releasers (explosives, motive propellant); Polymerization promoter; Terminator/Blocker; Processing aids, specific to petroleum production; Intermediate; Hardener; Adhesion/cohesion promoter; Not Known or Reasonably Ascertainable; Catalyst Quelle: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: Methenamine Quelle: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used in adhesives, coatings, sealants, and leather preservatives; also used as an anticorrosion agent, antibiotic, dye fixative, chemical stabilizer, and curing agent for formaldehyde resins and rubber; [HSDB] Used as a drug (methenamine) taken by mouth to prevent recurrent urinary tract infections; [Medscape DrugInfo] Used as a hardener for epoxy resins of the bisphenol A type; Used in the tire, rubber, foundry, and phenol-formaldehyde resin industries; Sometimes used in topical drugs and cosmetics; [Kanerva, p. 1811] Used as a formaldehyde releaser for photographic film development. [Kanerva, p. 1054-5] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Molding and Core Making [Category: Foundry]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Plastic Composites Manufacturing [Category: Industry]; Leather Tanning and Processing [Category: Industry]; Photographic Processing [Category: Other] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Anti-Infective Agents, Urinary Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: For methenamine (USEPA/OPP Pesticide Code: 045501) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: HMTA is used in the rubber industry to prevent vulcanized rubber from blocking and as a accelerator, as a curing agent for thermosetting resins (particularly phenyl-formaldehyde and urea-formaldehyde resins; in foundry mold castings as part of binder resins, in the production of nitrilotriacetic acid; in the manufacture of adhesives and coatings; in firelogs and briquettes for camping; and in flame-retardent materials. Because of its unique ability to hydrolyze to formaldehyde and ammonia under acidic conditions, it is also used in pharmaceuticals, for intestinal infection, and as a preservative in the food industry. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: In adhesives, coatings, and sealing compounds; as cross-linking agent for hardening phenol-formaldehyde resin and vulcanizing rubber; as corrosion inhibitor for steel; as fuel tablets for camping stoves; as stabilizer for lubricating and insulating oils; in the chemical detection of metals; in the preservation of hides; as dye fixative; for the manufacture of explosive compounds; antimicrobial food additive; detection of metals. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for METHENAMINE (9 total), please visit the HSDB record page. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Use (kg; approx.) in Germany (2009): >500; Use (kg; exact) in Germany (2009): 670; Consumption (g per capita; approx.) in Germany (2009): 0.00611; Consumption (g per capita; exact) in Germany (2009): 0.00818; Calculated removal (%): 8.8 Quelle: NORMAN Suspect List Exchange

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
EMBL-EBI ChEBIExakter Treffer2026-08-31
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Amtliche Quelle und Herkunft

Registrierte Quelle
ASEAN Cosmetic Directive annexes
Quellenverweis
ASEAN Annex VI, reference 30
Eintrags-ID der Quelle
VI-30
Quellenversion
2026-1
Quellsprache
English
Übersetzungsstatus
Original is English
Quelle aktualisiert
2026-06-22
Stand geprüft
2026-08-30 04:44 UTC
Validierungsmethode
pdfplumber ruled-table extraction with per-annex reviewed counts
SHA-256
ffad59f6c01a92c82042c54203ee14969425c2a82bd04c2f4012ff82513e69f1

Hinweise zum registrierten Datensatz

Datensatzabdeckung
Banned, restricted and positive-list substances under the harmonised ASEAN framework
Hinweis zur Behörde
Regional directive; member-state transitions and deviations still require local verification

Wie dieser Eintrag in den Marktdatensatz passt

2224
aktuelle Einträge für ASEAN
247
Einträge mit dem Status Permitted list with conditions
2224
Einträge aus dieser Quellenversion
1930
Markteinträge mit CAS-Identität

Statusverteilung

Bedingungstext ist bei 462 von 2224 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.

ASEAN Marktkontext

Complete regional annex dataset

Abdeckungsversion: ASEAN Cosmetic Directive annexes 2026-1, 22 June 2026

Annexes II, III, IV, VI and VII covering prohibited, restricted and positive-list substances.

Verifizierungs-Checkliste

  1. Search all ACD annexes by name and identifiers.
  2. Apply product type, maximum level and warning conditions.
  3. Confirm the target member state's adoption and transition date.
  4. Complete the local notification and responsible-company requirements.

Amtliche Marktquellen

Verifizierungsablauf und Vollständigkeit des Eintrags

Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden

  1. Bestätigen Sie, dass „Hexamethylenetetramine (methenamine) (INN) CAS No. 100-97-0“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
  2. Search all ACD annexes by name and identifiers.
  3. Apply product type, maximum level and warning conditions.
  4. Confirm the target member state's adoption and transition date.
  5. Complete the local notification and responsible-company requirements.
  6. Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.

In diesem Eintrag verfügbare Felder

  • Amtlicher StoffnameVerfügbar
  • CASVerfügbar
  • ECVerfügbar
  • Gesonderter BedingungstextVerfügbar
  • Datum des InkrafttretensNicht angegeben
  • Snapshot-Hash und MethodeVerfügbar

Fragen, die diese Seite beantwortet

This identity appears on a market positive list for the list function represented by the source record. Confirm that the intended function and product use fall within the list scope and every stated condition.

Positive-list presence is purpose-specific and is not blanket approval for every cosmetic use. Regional annex coverage does not replace member-state implementation dates, notifications or national deviations.

Der Eintrag zitiert ASEAN Annex VI, reference 30, Quellenversion 2026-1. Die amtliche Quelle öffnen.

Nein. CAS hilft bei der Klärung der Identität, aber Rechtsordnungen können denselben Stoff unterschiedlich einstufen und unterschiedliche Produktbereiche, Grenzwerte, Warnhinweise und Übergangsfristen anwenden.

Dauerhafte Zitierweise

Hexamethylenetetramine (methenamine) (INN) CAS No. 100-97-0. ASEAN Annex VI, reference 30. ASEAN. Source version 2026-1. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/asean/records/4289/

Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.

Auslegung und Grenzen für ASEAN

This identity appears on a market positive list for the list function represented by the source record.

Confirm that the intended function and product use fall within the list scope and every stated condition.

Wie die Rechtsrolle auszulegen ist

The cited row forms part of a binding rule or legally incorporated list for this market.

Belege auf dieser Seite

  • Erfasstes Ergebnis: Permitted list with conditions
  • Rechtsrolle: Binding rule
  • Quellenversion: 2026-1

Was es nicht beweist

Regional annex coverage does not replace member-state implementation dates, notifications or national deviations.

Weitere maßgebliche Stoffrecherche

Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Diese Identität bei der Quelle recherchieren

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Diese Identität bei der Quelle recherchieren

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Diese Identität bei der Quelle recherchieren

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Diese Identität bei der Quelle recherchieren

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Diese Identität bei der Quelle recherchieren

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Diese Identität bei der Quelle recherchieren

US EPA CompTox CTX APIs

Für den Import ist ein API-Schlüssel erforderlich

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Diese Identität bei der Quelle recherchieren