2-(ethoxyethoxy)-ethanol Diethylene glycol monoethyl ether (DEGEE) Ethoxydiglycol CAS No 111-90-0
ASEAN Annex III lists this record among substances allowed only under restrictions and conditions. Member-state transition rules and deviations still require local verification.
Regulatorische Entscheidung und vollständige Bedingungen
- Status
- Restricted
- Rechtsrolle
- Binding rule
- Regulatorische Zusammenfassung
- ASEAN Annex III lists this record among substances allowed only under restrictions and conditions. Member-state transition rules and deviations still require local verification.
- Bedingungen und Beschränkungen
(a) Oxidative hair dye products (b) Non-oxidative hair dye products (c) Rinse-off products other than hair dye products (d) Other non-spray cosmetic products (e) The following spray products: fine fragrances, hairsprays, anti-perspirants and deodorants. · (a) 7% (b) 5% (c) 10% (d) 2.6% (e) 2.6% · (a) to (e): The level of ethylene glycol impurity in Ethoxydiglycol must be ≤0.1% Not to be used in eye products and oral products.
Stoffidentität
- Name in der amtlichen Quelle
- 2-(ethoxyethoxy)-ethanol Diethylene glycol monoethyl ether (DEGEE) Ethoxydiglycol CAS No 111-90-0
- CAS
- 111-90-0
- EC
- 203-919-7
- Identitätszuordnung
- cas_number
- Verknüpfter Inhaltsstoff
- ETHOXYDIGLYCOL
Verknüpfte CosIng-Identitätsdaten
Namen und Aliase
CosIng-Beschreibung: 2-(2-Ethoxyethoxy)ethanol; Carbitol; Diethylene glycol monoethyl ether; DEGEE
Beschränkungshinweis aus dem EU-Verzeichnis: III/297
Erfasste kosmetische Funktion: HUMECTANT, PERFUMING, SOLVENT
Funktionsseiten:HUMECTANT, PERFUMING, SOLVENT
Das vollständige Inhaltsstoffprofil ansehenMarktübergreifende Übersicht zu dieser Identität
Exakte verknüpfte Einträge, die derzeit auf dieser Website vorhanden sind. Ein fehlender Markt bedeutet, dass kein exakter Treffer importiert wurde, nicht dass der Stoff verwendet werden darf.
European Union
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenGreat Britain
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenNew Zealand
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenASEAN
Aktueller Eintrag1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenIndia
1 verknüpfter Eintrag · 1 mit besonderen Bedingungen
Unterstützenden Eintrag öffnenSaudi Arabia
1 verknüpfter Eintrag
Unterstützenden Eintrag öffnen
Verifizierte Chemie für CAS 111-90-0
Diethylene Glycol Monoethyl Ether
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a primary alcohol, a glycol ether, a diether and a hydroxypolyether. It is functionally related to a diethylene glycol. — ChEBI
- IUPAC-Name
- 2-(2-ethoxyethoxy)ethanol
- Summenformel
- C6H14O3
- Molekulargewicht
- 134.17 g/mol
- Exakte Masse
- 134.094294304 Da
- Monoisotopische Masse
- 134.094294304 Da
- XLogP3
- -0,5
- Topologische polare Oberfläche
- 38,7 Ų
- Molekulare Komplexität
- 47,0
- Formale Ladung
- 0
- Wasserstoffbrücken-Donoren
- 1
- Wasserstoffbrücken-Akzeptoren
- 3
- Drehbare Bindungen
- 6
- Schweratome
- 9
- Kovalente Einheiten
- 1
An PubChem gemeldete Namen und Synonyme
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:40572
- ChEMBL:CHEMBL1230841
- EPA DTXSID:DTXSID2021941
- PubMed:33358762
- PubMed:25959454
- PubMed:22218002
- PubMed:22026377
- PubMed:21330095
- PubMed:20521179
- PubMed:19589377
- PubMed:19333469
- PubMed:19152165
- PubMed:18563577
- PubMed:18205921
- PubMed:18068919
Erweiterte Strukturstatistik
- Definierte Atom-Stereozentren
- 0
- Nicht definierte Atom-Stereozentren
- 0
- Definierte Bindungs-Stereozentren
- 0
- Nicht definierte Bindungs-Stereozentren
- 0
- 3D-Pharmakophormerkmale
- 4
- 3D-Ringe
- 0
- 3D-Hydrophobe
- 0
- 3D-Akzeptormerkmale
- 3
- 3D-Donormerkmale
- 1
- 3D-Anionenzentren
- 0
- 3D-Kationenzentren
- 0
- 3D-Konformere
- 10
- Effektive 3D-Rotoren
- 6,0
Maschinenlesbare Strukturkennungen
- SMILES
CCOCCOCCO- InChI
InChI=1S/C6H14O3/c1-2-8-5-6-9-4-3-7/h7H,2-6H2,1H3- InChIKey
XXJWXESWEXIICW-UHFFFAOYSA-N
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 400 °F (USCG, 1999) Quelle: CAMEO Chemicals
- Autoignition Temperature: 400 °F (204 °C) Quelle: Hazardous Substances Data Bank (HSDB)
- Autoignition Temperature: 204 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 396 °F at 760 mmHg (NTP, 1992) Quelle: CAMEO Chemicals
- Boiling Point: boiling point equals 396 °F Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Boiling Point: 196 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 196-202 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 396 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Boiling Point: 196 °C @760 [mm Hg] Quelle: PAC Chemical Database, U.S. Department of Energy
- Color/Form: Colorless liquid Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 0.99 at 68 °F (USCG, 1999) - Less dense than water; will float Quelle: CAMEO Chemicals
- Density: 0.9885 g/cu cm at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 0.99 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 0.99 Quelle: Occupational Safety and Health Administration (OSHA)
- Density: 0.986 @ 20°C Quelle: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 205 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Flash Point: Flash point equals 205 °F Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 196 °F (91 °C) (CLOSED CUP) Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 96 °C o.c. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Flash Point: 205 °F Quelle: Occupational Safety and Health Administration (OSHA)
- LogP: log Kow = -0.54 Quelle: Hazardous Substances Data Bank (HSDB)
- LogP: -0.15 (estimated) Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -108 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Melting Point: Freezing point = -54.0 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: -76 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -108 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Odor: Mild, pleasant odor Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190 °F. Used to make soaps, dyes, and other chemicals. Quelle: CAMEO Chemicals
- Physical Description: Liquid; CBI; Other Solid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: A clear slightly viscous liquid with a mild pleasant odor; [CAMEO] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS HYGROSCOPIC LIQUID. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: A colorless, slightly viscous liquid with a mildly sweet odor. Quelle: Occupational Safety and Health Administration (OSHA)
- Refractive Index: Index of refraction: 1.4273 at 20 °C/D Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: greater than or equal to 100 mg/mL at 68 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Solubility: Miscible with ether, pyridine, chloroform Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible with the common organic solvents. Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible with ethanol, acetone, benzene; very soluble in ethyl ether Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, miscible at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: very good Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.13 mmHg at 77 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Vapor Pressure: 0.12 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: Vapor pressure, Pa at 25 °C: 19 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.13 mmHg Quelle: Occupational Safety and Health Administration (OSHA)
- Vapor Pressure: 0.126 [mm Hg] @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Viscosity: 3.85 mPa.s (=cPs) at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
- Note: This chemical does not meet GHS hazard criteria for 90.4% (4397 of 4862) of all reports. Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: Not Classified; Reported as not meeting GHS hazard criteria by 4397 of 4862 companies (only 9.6% companies provided GHS information). For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 4862 reports by companies from 13 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 4397 of 4862 reports by companies.; There are 11 notifications provided by 465 of 4862 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- Precautionary Statement Codes: P210, P260, P264, P264+P265, P270, P280, P305+P351+P338, P319, P337+P317, P370+P378, P403, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Quelle: Cosmetic Ingredient Review (CIR)
- Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol monoethyl ether(SRC), using a log Kow of -0.54(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 12(SRC), determined from a log Kow of -0.54(2) and a regression-derived equation(3), indicates that diethylene glycol monoethyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol monoethyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.2X10-8 atm-cu m/mole(SRC), derived from its vapor pressure, 0.126 mm Hg(4), and assigned value for water solubility of 1X10+6 mg/L (miscible)(5). Diethylene glycol monoethyl ether is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). Aerobic screening test data(6-11) indicate that rapid aerobic biodegradation is likely to be the most important mechanism for the removal of diethylene glycol monoethyl ether from soil. Biodegradation of 48%(6) to 87%(7) were reported in non-acclimated cultures incubated for 20 days. Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 12(SRC), determined from a log Kow of -0.54(2) and a regression-derived equation(3), indicates that diethylene glycol monoethyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 2.2X10-8 atm-cu m/mole(SRC), derived from its vapor pressure, 0.126 mm Hg(4), and assigned value for water solubility of 1X10+6 mg/L (5)(miscible). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Diethylene glycol monoethyl ether is not expected to undergo hydrolysis or direct photolysis in aquatic environments(SRC). Alcohols and ethers are generally resistant to hydrolysis(3). They do not absorb UV light in the environmental range of >290 nm and are commonly used as solvents for obtaining UV spectra(14). Aerobic screening test data(8-13) indicate that rapid aerobic biodegradation is likely to be the most important mechanism for the removal of diethylene gl Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol monoethyl ether, which has a vapor pressure of 0.126 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol monoethyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 6.7 hours(SRC), calculated from its rate constant of 5.72X10-11 cu cm/molecule-sec at 23 °C(3). Diethylene glycol monoethyl ether does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight(4). Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Solvent; Cleaning agent; Fragrance; Not Known or Reasonably Ascertainable Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Cleaning agent; Not Known or Reasonably Ascertainable; Coalescing agent; Laboratory chemicals; Solvent; Other; Solubility enhancer Quelle: EPA Chemical Data Reporting (CDR)
- Cosmetic Ingredient Review Link: CIR ingredient: Ethoxydiglycol Quelle: Cosmetic Ingredient Review (CIR)
- Sources/Uses: Used in lubricating oil and braking fluid; [ChemIDplus] Used as a solvent for cellulose esters, lacquers, varnishes, enamels, dyestuffs, wood stains, gums, and resins; [Merck Index, 1800] Used in textile printing; [CHEMINFO] Used in photography (solvent for color processing); [www.ci.tucson.az.us/arthazards/medium.html] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Painting (Solvents) [Category: Paint]; Photographic Processing [Category: Other]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: AS SOLVENT FOR CELLULOSE ESTERS, IN LACQUER & THINNER FORMULATIONS; IN QUICK DRYING VARNISHES AND ENAMELS, FOR DYESTUFFS AND WOOD STAINS. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: A DILUENT FOR HYDRAULIC BRAKE FLUIDS; SOLVENT IN PROTECTIVE COATINGS, TEXTILE DYEING & PRINTING; SOLVENT IN COSMETICS, TOILETRIES Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Used as a chemical intermediate for the synthesis of 2-(2-ethoxyethoxy)ethyl acrylate. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Solvent for dyes, nitrocellulose, and resins; mutual solvent for mineral-oil-soap and mineral-oil-sulfonated-oil mixtures; nonaqueous stains for wood, for setting the twist and conditioning yarns and cloth; textile printing, textile soaps, lacquers, organic synthesis; brake fluid diluent. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Inert ingredient in pesticide products. Diethylene glycol monoethyl ether is found on List 2: potentially toxic other ingredients/high priority for testing inerts. ... List 2 inert ingredients are structurally similar to chemicals known to be toxic; some have data suggesting a concern. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Amtliche Quelle und Herkunft
- Registrierte Quelle
- ASEAN Cosmetic Directive annexes
- Quellenverweis
- ASEAN Annex III, reference 312
- Eintrags-ID der Quelle
III-312- Quellenversion
- 2026-1
- Quellsprache
- English
- Übersetzungsstatus
- Original is English
- Quelle aktualisiert
- 2026-06-22
- Stand geprüft
- 2026-08-30 04:44 UTC
- Validierungsmethode
- pdfplumber ruled-table extraction with per-annex reviewed counts
- SHA-256
ffad59f6c01a92c82042c54203ee14969425c2a82bd04c2f4012ff82513e69f1
Hinweise zum registrierten Datensatz
- Datensatzabdeckung
- Banned, restricted and positive-list substances under the harmonised ASEAN framework
- Hinweis zur Behörde
- Regional directive; member-state transitions and deviations still require local verification
Wie dieser Eintrag in den Marktdatensatz passt
Statusverteilung
Bedingungstext ist bei 462 von 2224 aktuellen Einträgen vorhanden. Ein leeres Bedingungsfeld wird entsprechend der oben genannten Eintragsart interpretiert; es wird niemals in die Aussage einer uneingeschränkten Verwendung umgedeutet.
ASEAN Marktkontext
Complete regional annex dataset
Abdeckungsversion: ASEAN Cosmetic Directive annexes 2026-1, 22 June 2026
Annexes II, III, IV, VI and VII covering prohibited, restricted and positive-list substances.
Verifizierungs-Checkliste
- Search all ACD annexes by name and identifiers.
- Apply product type, maximum level and warning conditions.
- Confirm the target member state's adoption and transition date.
- Complete the local notification and responsible-company requirements.
Amtliche Marktquellen
- ASEAN Cosmetic Directive annexesRegional directive; member-state transitions and deviations still require local verification
Verifizierungsablauf und Vollständigkeit des Eintrags
Bevor Sie dieses Ergebnis für eine Compliance-Entscheidung verwenden
- Bestätigen Sie, dass „2-(ethoxyethoxy)-ethanol Diethylene glycol monoethyl ether (DEGEE) Ethoxydiglycol CAS No 111-90-0“ und jede CAS-/EC-Kennung sich auf das Material in Ihrer Lieferantenspezifikation beziehen.
- Search all ACD annexes by name and identifiers.
- Apply product type, maximum level and warning conditions.
- Confirm the target member state's adoption and transition date.
- Complete the local notification and responsible-company requirements.
- Dokumentieren Sie die Quellenversion und prüfen Sie die Behörde vor Herstellung, Notifizierung oder Inverkehrbringen erneut.
In diesem Eintrag verfügbare Felder
- Amtlicher StoffnameVerfügbar
- CASVerfügbar
- ECVerfügbar
- Gesonderter BedingungstextVerfügbar
- Datum des InkrafttretensNicht angegeben
- Snapshot-Hash und MethodeVerfügbar
Fragen, die diese Seite beantwortet
Dauerhafte Zitierweise
2-(ethoxyethoxy)-ethanol Diethylene glycol monoethyl ether (DEGEE) Ethoxydiglycol CAS No 111-90-0. ASEAN Annex III, reference 312. ASEAN. Source version 2026-1. CosIng Checker regulatory record: https://cosingchecker.com/de/regulations/asean/records/4068/
Zitieren Sie die Aufsichtsbehörde als rechtliche Autorität. Diese Seite ist ein strukturierter Belegindex und eine Verifizierungshilfe, kein Ersatz für den amtlichen Text oder eine fachkundige rechtliche Bewertung.
Auslegung und Grenzen für ASEAN
This substance is not unrestricted: cosmetic use is subject to the conditions in the cited official record.
Check product type, body area, concentration, purity and warning requirements before deciding whether a formulation is compliant.
Wie die Rechtsrolle auszulegen ist
The cited row forms part of a binding rule or legally incorporated list for this market.
Belege auf dieser Seite
- Erfasstes Ergebnis: Restricted
- Rechtsrolle: Binding rule
- Quellenversion: 2026-1
Was es nicht beweist
Regional annex coverage does not replace member-state implementation dates, notifications or national deviations.
Weitere maßgebliche Stoffrecherche
Keine dieser Quellen hebt die oben genannte Marktentscheidung auf.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Diese Identität bei der Quelle recherchierenFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Diese Identität bei der Quelle recherchierenILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Diese Identität bei der Quelle recherchierenJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Diese Identität bei der Quelle recherchierenNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Diese Identität bei der Quelle recherchierenOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Diese Identität bei der Quelle recherchierenUS EPA CompTox CTX APIs
Für den Import ist ein API-Schlüssel erforderlichDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Diese Identität bei der Quelle recherchieren