DIBUTYL SEBACATE
Dibutyl sebacate
DIBUTYL SEBACATE ist im EU-CosIng-Verzeichnis aufgeführt, aber auf dieser Seite sind noch keine direkten Anhangseinträge verknüpft.
Auf einen Blick
- Funktion
- Film forming, fragrance, hair conditioning, plasticiser, skin conditioning, skin conditioning - emollient, solvent
- CAS
- 109-43-3
- EC
- 203-672-5
- EU-Anhänge
- Nicht aufgeführtEs ist kein EU-Anhangseintrag verknüpft. Das ist keine Zulassung.
Regulatorische Belege nach Markt
Für keinen der hier erfassten 13 Märkte wurde eine Vorschrift zu diesem Inhaltsstoff importiert.
Das beschreibt dieses Verzeichnis, nicht das Recht. Eine fehlende importierte Vorschrift ist kein Beleg dafür, dass ein Inhaltsstoff zulässig ist: Eine Vorschrift kann unter einem anderen Namen oder einer anderen Kennung oder in einem hier noch nicht importierten Datensatz existieren.
Verzeichnisangaben zu DIBUTYL SEBACATE
INCI-Name
DIBUTYL SEBACATE
Beschreibung
Dibutyl sebacate
Herkunft des Eintrags
- Verzeichnisverweis
- 75653
- Importierte Identität
- DIBUTYL SEBACATE
- Quellenaktualisierung
- 15/10/2010
Anhangseinträge für DIBUTYL SEBACATE
Kerndaten
- FILM FORMING
Producing (upon application) a continuous film on the skin, hair or nails.
- FRAGRANCE
Imparting an odour or taste. Creating a perceivable pleasant smell and/or masking a bad smell.
- HAIR CONDITIONING
Enhancing the appearance and feel of hair. Leaving the hair easy to comb, supple, soft and shiny and/or imparting volume, lightness, gloss, texture, etc.
- PLASTICISER
Softening and making supple synthetic polymers that otherwise could not be easily deformed, spread or worked out.
- SKIN CONDITIONING
Maintaining the skin in good condition.
- SKIN CONDITIONING - EMOLLIENT
Acting as lubricants on the skin surface providing the skin with a soft and smooth appearance.
- SOLVENT
Dissolving other components of cosmetics. Solvents are usually liquids (aqueous and nonaqueous).
Chemische Identität und Eigenschaften

- IUPAC-Name
- dibutyl decanedioate
- Summenformel
- C18H34O4
- Molekulargewicht
- 314.5 g/mol
- Exakte Masse
- 314.24570956 Da
- XLogP3
- 5,3
- Topologische polare Oberfläche
- 52,6 Ų
- Wasserstoffbrücken-Donoren
- 0
- Wasserstoffbrücken-Akzeptoren
- 4
- Kovalente Einheiten
- 1
- Definierte Stereozentren
- 0
Auch bekannt als
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:165632
- ChEMBL:CHEMBL2106225
- EPA DTXSID:DTXSID1041847
- PubMed:22224401
- PubMed:22171316
- PubMed:22163795
- PubMed:22139757
- PubMed:22125769
- PubMed:21946490
- PubMed:21753876
- PubMed:21698780
- PubMed:21254067
- PubMed:21181509
- PubMed:21095223
- PubMed:20800682
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 690 °F (365 °C) Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 344.5 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 211.00 to 212.00 °C. @ 11.00 mm Hg Quelle: Human Metabolome Database (HMDB)
- Boiling Point: 344-345 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 345-349 °C; 211-212 °C (11 mm Hg) Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Color/Form: Colorless liquid Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 0.9405 @ 15 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 0.9 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 0.936-0.940 (20 °C) Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Flash Point: 353 °F (178 °C) (OPEN CUP) Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 167 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -10 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: 12 °C Quelle: Human Metabolome Database (HMDB)
- Melting Point: -10 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Odor: Odorless Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: CBI; Liquid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless oily liquid; [ICSC] Odorless; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Liquid Quelle: Human Metabolome Database (HMDB)
- Physical Description: COLOURLESS OILY LIQUID. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: colourless to oily liquid; fruity but very mild odour with a very faint fruity oily taste Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Refractive Index: Index of refraction: 1.4433 @ 15 °C/D Quelle: Hazardous Substances Data Bank (HSDB)
- Refractive Index: 1.439-1.444 Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: Soluble in ethyl ether Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: water solubility = 40 mg/l @ 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 0.04 mg/mL at 20 °C Quelle: Human Metabolome Database (HMDB)
- Solubility: Solubility in water: none Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: insoluble in water; soluble in alcohol; miscible in oil Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: (in ethanol) Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Vapor Pressure: 0.00000469 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 4.69X10-6 mm Hg @ 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Carcinogen Classification: No indication of carcinogenicity to humans (not listed by IARC). Quelle: Toxin and Toxin Target Database (T3DB)
- Note: This chemical does not meet GHS hazard criteria for 82.8% (410 of 495) of all reports. Quelle: European Chemicals Agency (ECHA)
- Signal: Warning Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H315 (16.8%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (16.8%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (16.6%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 495 reports by companies from 14 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 410 of 495 reports by companies.; There are 12 notifications provided by 85 of 495 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Quelle: Cosmetic Ingredient Review (CIR)
- Environmental Bioconcentration: An estimated BCF of 77 was calculated for dibutyl sebacate(SRC), using a water solubility of 40 mg/l(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 575(SRC), determined from a water solubility of 40 mg/l(2) and a regression-derived equation(3), indicates that dibutyl sebacate is expected to have low mobility in soil(SRC). Volatilization of dibutyl sebacate from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 4.8X10-8 atm-cu m/mole(SRC), calculated from a vapor pressure of 4.7X10-6 mm Hg(4) and water solubility of 40 mg/l(2). Dibutyl sebacate is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). Dibutyl sebacate and other plasticizers were readily biodegraded by pure bacterial and fungal cultures(5,6). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 575(SRC), determined from a water solubility of 40 mg/l(2) and a regression-derived equation(3), indicates that dibutyl sebacate is expected to adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is not expected to be an important fate process(3) based upon an estimated Henry's Law constant of 4.8X10-8 atm-cu m/mole(SRC), calculated from a vapor pressure of 4.7X10-6 mm Hg(4) and water solubility of 40 mg/l(2). A base-catalyzed second-order hydrolysis rate constant of 0.05 L/mole-sec(SRC) was estimated using a structure estimation method(5); this corresponds to half-lives of 4.5 years and 166 days at pH values of 7 and 8, respectively(5). Dibutyl sebacate and other plasticizers were readily biodegraded by pure bacterial and fungal cultures(6,7). According to a classification scheme(8),an estimated BCF of 77(SRC), from its water solubility(2) and a regression-derived equation(3), suggests the potential for bioconcentration in aquatic organisms is moderate(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dibutyl sebacate, which has a vapor pressure of 4.7X10-6 mm Hg at 25 °C(2), is expected to exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase dibutyl sebacate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 21 hours(SRC), calculated from its estimated rate constant of 1.8X10-11 cu cm/molecule-sec at 25 °C(SRC) determined using a structure estimation method(3). Particulate-phase dibutyl sebacate may be removed from the air by wet and dry deposition(SRC). Dibutyl sebacate may also undergo direct photolysis in the environment since this compound contains functional groups that can absorb light greater than 290 nm(4). Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Pigment; Not Known or Reasonably Ascertainable; Plasticizer Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Pigment; Not Known or Reasonably Ascertainable; Plasticizer Quelle: EPA Chemical Data Reporting (CDR)
- Cosmetic Ingredient Review Link: CIR ingredient: Dibutyl Sebacate Quelle: Cosmetic Ingredient Review (CIR)
- Sources/Uses: Used as plasticizer, rubber softener, dielectric liquid, flavoring ingredient, and additive to cosmetics and perfumes; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: SYNTHETIC FLAVORING ADJUVANT Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Plasticizer, rubber softener, dielectric liquid, cosmetic and perfumes, flavoring ingredient Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Plastics -> Typical concentration range in plastic materials -> 10.0 - 35.0% Quelle: NORMAN Suspect List Exchange
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Belege zum amtlichen EU-Inhaltsstoffnamen
Der Inhaltsstoffname stimmt exakt mit dem amtlichen EU-Glossar 2025 der gebräuchlichen Inhaltsstoffnamen überein.
Verwandte Belege aus dem Verzeichnis
Inhaltsstoffe mit sich überschneidenden Rezepturfunktionen
Weitere amtliche und wissenschaftliche Quellen
11 externe Datenbanken zur Prüfung dieser Identität
Jeder Link durchsucht die jeweilige Quelle nach dieser Identität. Was jede Quelle ist und welches rechtliche Gewicht sie hat
Wie DIBUTYL SEBACATE im CosIng-Verzeichnis erscheint
Das CosIng-Verzeichnis führt DIBUTYL SEBACATE als kosmetischen Inhaltsstoff, und diese Seite verknüpft ihn mit 0 Anhangseinträgen. Der Verzeichniseintrag erfasst Namen und Kennungen, während die Anhangseinträge zeigen, wo der Stoff im EU-Kosmetikrecht verboten, beschränkt oder positiv gelistet ist.
DIBUTYL SEBACATE ist in den amtlichen Daten außerdem mit 7 kosmetischen Funktionen gekennzeichnet. Funktionsbezeichnungen beschreiben die beabsichtigte Verwendung, ersetzen aber nicht die regulatorische Prüfung verknüpfter Anhangseinträge vor der Rezeptierung oder Kennzeichnung.
Häufig gestellte Fragen
Quellenhinweis zu DIBUTYL SEBACATE
Diese Seite gibt den CosIng-Verzeichniseintrag für DIBUTYL SEBACATE aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Inhaltsstoffen wieder und zeigt verknüpfte Kennungen auch dann, wenn derzeit kein direkter Anhangstreffer zugeordnet ist.
Nutzen Sie diese Verzeichnisseite, um DIBUTYL SEBACATE zu recherchieren und verknüpfte Einträge zu vergleichen; verifizieren Sie Beschränkungen und Rechtsstatus jedoch anhand des aktuellen amtlichen Quellentextes und Rechts, bevor Sie regulatorische Entscheidungen treffen.
Werkzeuge und nächste Schritte
Rezeptur prüfen
Eine vollständige INCI-Liste prüfen, um DIBUTYL SEBACATE und etwaige verknüpfte EU-Anhangsbeschränkungen oder Allergenmarkierungen zu erkennen.
INCI-CheckerÄhnliche Inhaltsstoffe suchen
Weitere Inhaltsstoffe aus dem Verzeichnis und Anhangseinträge finden, die mit DIBUTYL SEBACATE, seinen Kennungen oder nahen Namensvarianten zusammenhängen.
Suche