Zum Hauptinhalt springen
CAS 0 Einträge

CAS 123-38-6

CAS 123-38-6 entspricht 0 EU-Anhangseinträgen in den Anhängen II–VI der Verordnung (EG) Nr. 1223/2009.

Einträge zu CAS 123-38-6

0 insgesamt
Für diese CAS-Nummer wurden keine Einträge gefunden.

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 123-38-6
CAS 123-38-6PubChem CID 527

Propanal

Propanal is an aldehyde that consists of ethane bearing a formyl substituent. The parent of the class of propanals. It has a role as an Escherichia coli metabolite. It is a member of propanals and an alpha-CH2-containing aldehyde. — ChEBI

IUPAC-Name
propanal
Summenformel
C3H6O
Molekulargewicht
58.08 g/mol
Exakte Masse
58.041864811 Da
XLogP3
0,6
Topologische polare Oberfläche
17,1 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
1
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

PropionaldehydePropanaldehydePropylaldehydePropaldehydeMethylacetaldehyden-PropanalPropionalPropionic aldehyde
16 weitere gemeldete Namen
1-PropanalPropylic aldehyden-PropionaldehydePropyl aldehydeAldehyde propionique1-PropanoneFEMA No. 2923FEMA Number 2923NCI-C61029AMJ2B4M67VNSC-6493CHEBI:17153RefChem:6675204-623-0ProponalPropanalaldehyde
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer527

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whene Quelle: CAMEO Chemicals
  • ERG2024, Guide 129P (Propionaldehyde): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H225 (100%): Highly Flammable liquid and vapor [Danger Flammable liquids]; H302 (19.9%): Harmful if swallowed [Warning Acute toxicity, oral]; H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (91.5%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (19.6%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (100%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P317, P319, P321, P330, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2074 reports by companies from 31 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H302: Harmful if swallowed [Warning Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard] Quelle: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P273, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P317, P319, P321, P330, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H302: Harmful if swallowed [Warning Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P317, P321, P330, P332+P317, P337+P317, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 2 - Materials that readily undergo violent chemical changes at elevated temperatures and pressures. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Specific Notice: W - No water: Materials that react violently or explosively with water. Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for propionaldehyde(SRC), using a log Kow of 0.59(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 50(SRC), determined from a log Kow of 0.59(2) and a regression-derived equation(3), indicates that propionaldehyde is expected to have very high mobility in soil(SRC). Volatilization of propionaldehyde from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 7.34X10-5 atm-cu m/mole(4). Propionaldehyde is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 317 mm Hg(5). Propionaldehyde reached 94% of its theoretical BOD in 4 weeks using an activated sludge inoculum in the Japanese MITI test, suggesting that biodegradation may be an important environmental fate process in soil(SRC). Propionaldehyde degrades by anaerobic biological treatment with 26% utilization being reported in a system with a 20 day hydraulic retention time(7). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 50(SRC), determined from a log Kow of 0.59(2) and a regression-derived equation(3), indicates that propionaldehyde is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 7.34X10-5 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 11 hrs and 5.8 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Propionaldehyde reached 94% of its theoretical BOD in 4 weeks using an activated sludge inoculum in the Japanese MITI test(7), suggesting that biodegradation may be an important environmental fate process in water(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), propionaldehyde, which has a vapor pressure of 317 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase propionaldehyde is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 18 or 20 hrs(SRC), calculated from rate constants of 2.11X10-11 cu cm/molecule-sec(3) and 1.96X10-11 cu cm/molecule-sec(4), respectively. The rate constant for the vapor-phase reaction of propionaldehyde with nitrate radical has been experimentally determined to be 6.0X10-13 cu cm/sec(3). This corresponds to an atmospheric half-life of about 1.3 hrs(SRC). The direct photolysis rate constant for propionaldehyde in air is about 4X10-5 sec-1(5), which corresponds to a half-life of about 4.8 hrs(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Propionaldehyde is used in the manufacture of plastics, in the synthesis of rubber chemicals, and as a disinfectant and preservative. Quelle: EPA Hazardous Air Pollutants
  • Sources/Uses: Used to make propionic acid, trimethylolethane, polyvinyl and other plastics, and rubber, medicinal, and agricultural chemicals; Also used as a disinfectant, preservative, and flavoring agent; [HSDB] Used as a chemical intermediate in closed systems and not contained in consumer products; [AIHA] Used almost exclusively (thought to be >99%) as a closed system intermediate and transported by bulk carrier; [OECD SIDS] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Using Disinfectants or Biocides [Category: Clean] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For Propionaldehyde (USEPA/OPP Pesticide Code: 202400) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Intermediate in the mfr of trimethylolethane for use in alkyd resin systems and, in certain cases, it is oxidized to propionic acid and reduced to propyl alcohol; in medicinal and agricultural chemical preparations. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Manufacture of propionic acid, polyvinyl and other plastics; synthesis of rubber chemicals; disinfectant; preservative Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Reported uses (ppm): (FEMA, 2005); Table: Reported uses (ppm): (FEMA, 2005) [Table#2979] Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Used as a synthetic flavoring... Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Wie CAS 123-38-6 auf dieser Website verwendet wird

CAS 123-38-6 ist die Kennung des Chemical Abstracts Service, mit der diese Seite einem bestimmten Stoff zugeordnet wird. Im aktuellen Datenbestand haben 0 EU-Anhangseinträge diese Kennung; so können Sie gegenprüfen, ob derselbe Stoff in einem oder in mehreren regulatorischen Zusammenhängen auftaucht.

Nutzen Sie diese Seite, wenn eine Lieferantenspezifikation, ein Sicherheitsdatenblatt oder ein Rohstoffdossier CAS 123-38-6 nennt und Sie alle verknüpften Einträge der Anhänge II–VI an einem Ort sehen möchten. Die Eintragskarten oben sind der schnellste Weg zu Konzentrationsgrenzen, Warnhinweisen, Anhangszuordnung und Produktartbedingungen.