Zum Hauptinhalt springen
CAS 1 Eintrag

CAS 122-99-6

CAS 122-99-6 entspricht 1 EU-Anhangseintrag in den Anhängen II–VI der Verordnung (EG) Nr. 1223/2009.

Einträge zu CAS 122-99-6

1 insgesamt

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 122-99-6
CAS 122-99-6PubChem CID 31236

Phenoxyethanol

2-phenoxyethanol is an aromatic ether that is phenol substituted on oxygen by a 2-hydroxyethyl group. It has a role as an antiinfective agent and a central nervous system depressant. It is a primary alcohol, a glycol ether and an aromatic ether. It is functionally related to a phenol. — ChEBI

IUPAC-Name
2-phenoxyethanol
Summenformel
C8H10O2
Molekulargewicht
138.16 g/mol
Exakte Masse
138.068079557 Da
XLogP3
1,2
Topologische polare Oberfläche
29,5 Ų
Wasserstoffbrücken-Donoren
1
Wasserstoffbrücken-Akzeptoren
2
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

Ethylene glycol monophenyl etherPhenyl cellosolvePhenoxetholPhenoxytolEthanol, 2-phenoxy-2-Phenoxyethan-1-OlPhenoxetolEthylene glycol phenyl ether
16 weitere gemeldete Namen
Rose etherPhenoxyethyl alcohol1-Hydroxy-2-phenoxyethaneArosolPhenylmonoglycol ether2-Phenoxyethyl alcoholDowanol EPDowanol EPHGlycol monophenyl ether2-Hydroxyethyl phenyl etherEmeressence 1160Fenyl-cellosolve2-FenoxyethanolFenylcelosolvEmery 6705beta-Hydroxyethyl phenyl ether
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer31236

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P261, P264, P264+P265, P270, P271, P280, P301+P317, P304+P340, P305+P354+P338, P317, P319, P330, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 4299) of reports. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (99.8%): Harmful if swallowed [Warning Acute toxicity, oral]; H318 (13%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H319 (87%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (13%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P264, P264+P265, P270, P271, P280, P301+P317, P304+P340, P305+P351+P338, P305+P354+P338, P317, P319, P330, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 4299 reports by companies from 38 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 4299 reports by companies.; There are 37 notifications provided by 4298 of 4299 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation] Quelle: NITE-CMC
  • Precautionary Statement Codes: P264, P264+P265, P270, P280, P301+P317, P305+P354+P338, P317, P330, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Signal: Warning Quelle: NITE-CMC
  • NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Quelle: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: 2-Phenoxyethanol is a glycol ether. Glycol ethers can produce toxicity following oxidation to the corresponding aldehyde and alkoxyacetic acid by alcohol dehydrogenase (ADH; EC 1.1.1.1) and aldehyde dehydrogenase (ALDH; EC 1.2.1.3), respectively. (A15201) 2-Phenoxyethanol causes reduction of NMDA-induced membrane currents, indicating a neurotoxic potential for 2-phenoxyethanol. (A15202) Quelle: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: An estimated BCF of 1.5 was calculated in fish for 2-phenoxyethanol(SRC), using a log Kow of 1.16(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a structure estimation method(2), indicates that 2-phenoxyethanol is expected to have very high mobility in soil(SRC). Volatilization of 2-phenoxyethanol from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 4.9X10-8 atm-cu m/mole(SRC), based upon its vapor pressure, 0.007 mm Hg at 25 °C(3), and water solubility, 2.6X10+4 mg/L(4). One biodegradation study reported theoretical 2-phenoxyethanol BODs of 2% (5-day), 71% (10-day), and 80% (20-day)(3); a theoretical 20-day BOD of 50%(3) indicates biodegrdaation may be an important environmnetal fate process in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a structure estimation method(2), indicates that 2-phenoxyethanol is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 4.9X10-8 atm-cu m/mole(SRC), derived from its vapor pressure, 0.007 mm Hg at 25 °C(4), and water solubility, 2.6X10+4 mg/L(5). According to a classification scheme(6), an estimated BCF of 1.5(SRC), from its log Kow of 1.16(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is low. One biodegradation study reported theoretical 2-phenoxyethanol BODs of 2% (5-day), 71% (10-day), and 80% (20-day)(4); a theoretical 20-day BOD of 50% indicates a compound will largely be removed during biological waste treatment(4). 2-Phenoxyethanol is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2-phenoxyethanol, which has a estimated vapor pressure of 0.007 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2-phenoxyethanol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 11.8 hours(SRC), calculated from its rate constant of 3.27X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Monitoring data have shown that 2-phenoxyethanol can be removed from the atmosphere via precipitation such as snow(4). 2-Phenoxyethanol does not absorb at wavelengths >290 nm(5), and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Consumer Uses: Solvent; Other; Processing aids not otherwise specified; Surfactant (surface active agent); Fragrance; Cleaning agent; Preservative; Not Known or Reasonably Ascertainable; Soil amendments (fertilizers) Quelle: EPA Chemical Data Reporting (CDR)
  • Industry Uses: Etching agent; Preservative; Not Known or Reasonably Ascertainable; Waterproofing agent; Fragrance; Fixing agent (mordant); Cleaning agent; Plasticizer; Processing aids not otherwise specified; Surfactant (surface active agent); Other; Solvent Quelle: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: Phenoxyethanol Quelle: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used in perfumes, insect repellants, and antiseptics and to produce other organic chemicals; [Merck Index, 7257] Used as a solvent for inks, dyes, and cleaners; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Metal Degreasing [Category: Clean]; Using Disinfectants or Biocides [Category: Clean]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Fixative for perfumes, in organic synthesis; as a bactericide in conjunction with quaternary ammonium compounds Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Solvent for cellulose acetate, dyes; inks, resins; perfume fixative; bactericidal agent; organic synthesis of plasticizers, germicides, pharmaceuticals; insect repellents Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: MEDICATION Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Use (kg; approx.) in Germany (2009): >25000; Consumption (g per capita; approx.) in Germany (2009): 0.305; Calculated removal (%): 92.1 Quelle: NORMAN Suspect List Exchange
  • Uses: 2-Phenoxyethanol is used in many applications such as cosmetics, vaccines and pharmaceuticals as a preservative. It is also used as a fixative for perfumes, an insect repellent, a topical antiseptic, a solvent for cellulose acetate, some dyes, inks, and resins, in preservatives, pharmaceuticals, and in organic synthesis. Quelle: Toxin and Toxin Target Database (T3DB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Wie CAS 122-99-6 auf dieser Website verwendet wird

CAS 122-99-6 ist die Kennung des Chemical Abstracts Service, mit der diese Seite einem bestimmten Stoff zugeordnet wird. Im aktuellen Datenbestand hat 1 EU-Anhangseintrag diese Kennung; so können Sie gegenprüfen, ob derselbe Stoff in einem oder in mehreren regulatorischen Zusammenhängen auftaucht.

Nutzen Sie diese Seite, wenn eine Lieferantenspezifikation, ein Sicherheitsdatenblatt oder ein Rohstoffdossier CAS 122-99-6 nennt und Sie alle verknüpften Einträge der Anhänge II–VI an einem Ort sehen möchten. Die Eintragskarten oben sind der schnellste Weg zu Konzentrationsgrenzen, Warnhinweisen, Anhangszuordnung und Produktartbedingungen.

Häufig gestellte Fragen

Ein durch CAS 122-99-6 identifizierter Stoff kann in mehreren Anhängen der EU-Kosmetikverordnung vorkommen, wenn er in unterschiedlichen Zusammenhängen unterschiedlichen Bedingungen unterliegt. Ein Stoff kann beispielsweise nach Anhang III mit bestimmten Bedingungen beschränkt sein, und dieselbe CAS-Nummer kann auch in Anhang IV als zugelassener Farbstoff unter eigenen Eintragsbedingungen erscheinen. Jeder Eintrag muss einzeln geprüft werden.

Gleichen Sie die CAS-Nummer mit den Spezifikationsblättern und Analysenzertifikaten Ihrer Rohstoffe ab. Erscheint eine CAS-Nummer in Anhang II, prüfen Sie die Abwesenheit des Stoffs. Erscheint sie in Anhang III, prüfen Sie, ob Konzentrationsgrenzen und Produktartbedingungen in Ihrer Rezeptur eingehalten werden. Alle Anhangseinträge mit dieser CAS-Nummer sind oben aufgeführt.

Eine CAS-Nummer wird vom Chemical Abstracts Service (USA) vergeben und ist weltweit anerkannt. Eine EC-Nummer ist eine Kennung der Europäischen Kommission aus Verzeichnissen wie EINECS, ELINCS oder der NLP-Liste. Beide Kennungen können in Einträgen der EU-Kosmetikanhänge vorkommen. Manche Stoffe haben beide, manche nur eine, und einige ältere Einträge haben möglicherweise keine von beiden.

Der INCI-Checker akzeptiert Inhaltsstoffnamen, CAS-Nummern und EC-Nummern. Prüfen Sie diese CAS-Nummer direkt und gleichen Sie das Ergebnis anschließend mit den Spezifikationsblättern der Lieferanten und allen verknüpften Anhangsbedingungen ab.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Eine vollständige INCI-Liste prüfen und anschließend mit CAS 122-99-6 Lieferantendokumente zu den gefundenen Stoffen gegenprüfen.

INCI-Checker

Anhänge durchsuchen

Alle Anhänge der EU-Kosmetikverordnung nach Kategorie durchsuchen.

Alle Anhänge

Nach Name suchen

Nach INCI-Namen, Aliasen oder verwandten Kennungen suchen, die in Ihrer Dokumentation neben CAS 122-99-6 stehen.

Suche