Zum Hauptinhalt springen
CAS 0 Einträge

CAS 122-20-3

CAS 122-20-3 entspricht 0 EU-Anhangseinträgen in den Anhängen II–VI der Verordnung (EG) Nr. 1223/2009.

Einträge zu CAS 122-20-3

0 insgesamt
Für diese CAS-Nummer wurden keine Einträge gefunden.

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 122-20-3
CAS 122-20-3PubChem CID 24730

Triisopropanolamine

Triisopropanolamine is a white solid with slight odor of ammonia. Denser than water. — CAMEO Chemicals

IUPAC-Name
1-[bis(2-hydroxypropyl)amino]propan-2-ol
Summenformel
C9H21NO3
Molekulargewicht
191.27 g/mol
Exakte Masse
191.15214353 Da
XLogP3
-0,5
Topologische polare Oberfläche
63,9 Ų
Wasserstoffbrücken-Donoren
3
Wasserstoffbrücken-Akzeptoren
4
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

TIPATRIS(2-HYDROXYPROPYL)AMINETri-2-propanolamineTri-iso-propanolamineTris(2-propanol)amineTris(2-hydroxy-1-propyl)amine2-Propanol, 1,1',1''-nitrilotri-2-Propanol, 1,1',1''-nitrilotris-
16 weitere gemeldete Namen
1,1',1''-Nitrilotri-2-propanolTriisopropanolaminW9EN9DLM981,1',1''-Nitrilotris(2-propanol)UNICHEM TIPANSC-40101,1',1''-Nitrilotris[2-propanol]204-528-4TiPlARefChem:1916971,1',1''-Nitrilotripropan-2-ol1,1',1''-Nitrilotris(propan-2-ol)NSC 40103,3',3''-Nitrilotri(2-propanol)Triisopropanolamine (mixture of isomers)Caswell No. 891
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer24730

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whene Quelle: CAMEO Chemicals
  • Signal: Warning Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 1735) of reports. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H319 (98.8%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H412 (66.9%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P264+P265, P273, P280, P305+P351+P338, P337+P317, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1735 reports by companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 1735 reports by companies.; There are 11 notifications provided by 1734 of 1735 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Quelle: NITE-CMC
  • Precautionary Statement Codes: P261, P264+P265, P271, P280, P304+P340, P305+P354+P338, P317, P319, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Signal: Warning Quelle: NITE-CMC
  • NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Conclusion: The Panel concludes that Diisopropanolamine, Triisopropanolamine, Isopropanolamine, and Mixed Isopropanolamines are safe as cosmetic ingredients in the present practices of use and concentration. The isopropanolamines should not be used in products containing N-nitrosating agents. Quelle: Cosmetic Ingredient Review (CIR)
  • Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Quelle: Cosmetic Ingredient Review (CIR)
  • Environmental Bioconcentration: During a 6 week period using carp fish (Cyprinus carpio), BCF values of <0.06 and <0.57 were measured for triisopropanolamine at respective concentrations of 2.5 and 0.25 mg/L(1). According to a classification scheme(2), these BCF values suggest the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that triisopropanolamine is expected to have very high mobility in soil(SRC). The pKa of triisopropanolamine is 8.06(3), indicating that this compound will partially exist in cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of triisopropanolamine from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 9.8X10-12 atm-cu m/mole(SRC), using a fragment constant estimation method(2). Triisopropanolamine is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 9.75X10-6 mm Hg at 25 °C(4). Triisopropanolamine was found to be not readily biodegradable using the Japanese MIT test where triisopropanolamine had only a 3.4% BODT after 4 weeks(5). However, the results of other ready, inherent and simulation tests have indicated that triisopropanolamine is readily susceptible to biodegradation with CO2 the dominant degradation product u Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that triisopropanolamine is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 9.8X10-12 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). According to a classification scheme(4), a BCF value of <0.57 in carp fish(5) suggests the potential for bioconcentration in aquatic organisms is low(SRC). Triisopropanolamine was found to be not readily biodegradable using the Japanese MIT test where triisopropanolamine had only a 3.4% BODT after 4 weeks(6). However, the results of other ready, inherent and simulation tests have indicated that triisopropanolamine is readily susceptible to biodegradation with CO2 the dominant degradation product under aerobic conditions(7). In a lake water-sediment batch study, triisopropanolamine had a half-life of 14.3 days with 62% mineralization to CO2(7). Triisopropanolamine is expected to be stable to aqueous hydrolysis in the environment(8). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), triisopropanolamine, which has a vapor pressure of 9.75X10-6 mm Hg at 25 °C(2), is expected to exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase triisopropanolamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 3 hours(SRC), calculated from its rate constant of 1.2X10-10 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase triisopropanolamine may be removed from the air by wet or dry deposition(SRC). Triisopropanolamine absorbs light at wavelengths >290 nm(2) and may be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Intermediate; Stabilizing agent; Not Known or Reasonably Ascertainable; pH regulating agent; Processing aids not otherwise specified; Other Quelle: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: Triisopropanolamine Quelle: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used as an emulsifying agent, rubber cross-linking agent, corrosion inhibitor in metal working fluids, and surfactant; [HSDB] Used in cyanide-free zinc plating and in the rubber industry; [CHEMINFO] Used in coatings (cross-linker and stabilizer) and pesticides (neutralizer and stabilizer); [Reference #1] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Metal Machining [Category: Heat or Machine]; Electroplating [Category: Plate]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Farming (Pesticides) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For Tris(2-hydroxypropyl)amine) (USEPA/OPP Pesticide Code: 004209) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Emulsifying agents. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Crosslinking agent (rubber); emulsifier/corrosion inhibitor (metal working fluids); surfactant/solubilising agent Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Color stabilizer for polyethylene formulations Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Triisopropanolamine is widely used as emulsifiers, stabilizers, surfactants and chemical intermediates. Major applications include: coatings as a cross-linker, acid neutralizer to improve product stability and pesticides as a neutralizer and to improve product stability. Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Wie CAS 122-20-3 auf dieser Website verwendet wird

CAS 122-20-3 ist die Kennung des Chemical Abstracts Service, mit der diese Seite einem bestimmten Stoff zugeordnet wird. Im aktuellen Datenbestand haben 0 EU-Anhangseinträge diese Kennung; so können Sie gegenprüfen, ob derselbe Stoff in einem oder in mehreren regulatorischen Zusammenhängen auftaucht.

Nutzen Sie diese Seite, wenn eine Lieferantenspezifikation, ein Sicherheitsdatenblatt oder ein Rohstoffdossier CAS 122-20-3 nennt und Sie alle verknüpften Einträge der Anhänge II–VI an einem Ort sehen möchten. Die Eintragskarten oben sind der schnellste Weg zu Konzentrationsgrenzen, Warnhinweisen, Anhangszuordnung und Produktartbedingungen.