Zum Hauptinhalt springen
CAS 1 Eintrag

CAS 110-85-0

CAS 110-85-0 entspricht 1 EU-Anhangseintrag in den Anhängen II–VI der Verordnung (EG) Nr. 1223/2009.

Einträge zu CAS 110-85-0

1 insgesamt

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 110-85-0
CAS 110-85-0PubChem CID 4837

Piperazine

Needle-like white or colorless crystals. Shipped as a solid or suspended in a liquid medium. Very corrosive to skin, eyes and mucous membranes. Solid turns dark when exposed to light. Flash point 190 °F. Used as a corrosion inhibitor and as an insecticide. — CAMEO Chemicals

IUPAC-Name
piperazine
Summenformel
C4H10N2
Molekulargewicht
86.14 g/mol
Exakte Masse
86.084398327 Da
XLogP3
-1,5
Topologische polare Oberfläche
24,1 Ų
Wasserstoffbrücken-Donoren
2
Wasserstoffbrücken-Akzeptoren
2
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

Diethylenediamine1,4-DiazacyclohexaneHexahydropyrazinePiperazinAntirenPiperazidineDiethyleneimineDispermine
16 weitere gemeldete Namen
LumbricalPipersolEraverm1,4-PiperazineWurmirazinUvilonPiperazine, anhydrousWorm-A-Ton1,4-DiethylenediaminePyrazine hexahydrideHexahydro-1,4-diazinePyrazine, hexahydro-Piperazine (USP)NSC-4741RTM4PAL0VPiperazine [USP]
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer4837

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • ERG2024, Guide 153 (Piperazine): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H361fd: Suspected of damaging fertility; Suspected of damaging the unborn child [Warning Reproductive toxicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P271, P272, P280, P284, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P318, P321, P333+P317, P342+P316, P362+P364, P363, P403, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for 0.1% (1 of 768) of reports. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H228 (34.6%): Flammable solid [Danger Flammable solids]; H314 (99.9%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317 (99.7%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H318 (39.7%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H334 (99.7%): May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H361 (77.3%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H361fd (23.4%): Suspected of damaging fertility; Suspected of damaging the unborn child [Warning Reproductive toxicity] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P260, P261, P264, P264+P265, P271, P272, P280, P284, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P318, P321, P333+P317, P342+P316, P362+P364, P363, P370+P378, P403, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 768 reports by companies from 32 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 768 reports by companies.; There are 31 notifications provided by 767 of 768 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P264+P265, P270, P271, P272, P273, P280, P284, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P308+P316, P316, P317, P318, P319, P321, P333+P317, P342+P316, P362+P364, P363, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: BCF values less than 0.3 to 0.9 and less than 3.9 were measured using orange-red killifish (Oryzias latipes) which were exposed to 1 and 0.1 ppm, respectively, over an 8-week period(1). According to a classification scheme(2), these BCF values suggest the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 3.6(SRC), determined from a log Kow of -1.50(2) and a regression-derived equation(3), indicates that piperazine is expected to have very high mobility in soil(SRC). Measured pKa values of 9.73 (first nitrogen) and 5.33 (second nitrogen)(4) indicate that piperazine will exist primarily in cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5). Volatilization of piperazine from moist soil surfaces is not expected to be an important fate process(SRC) since cations do not volatilize. Piperazine is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.16 mm Hg(6). Piperazine may biodegrade in soil based on greater than 51% biodegradation measured after 28 days in a artificial river water total organic carbon (TOC) die-away test; however, only 1.4% degradation occurred after 14 days during a MITI screening test(7,8). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 3.6(SRC), determined from a log Kow of -1.50(2) and a regression-derived equation(3), indicates that piperazine is not expected to adsorb to suspended solids and sediment(SRC). However, measured pKa values of 9.73 (first nitrogen) and 5.33 (second nitrogen)(4) indicate piperazine will exist almost entirely in the cation form at pH values of 5 to 9 and cations adsorb to suspended solids and sediment more strongly than their neutral counterparts(5). Volatilization of piperazine from water surfaces is not expected to be an important fate process since cations do not volatilize. According to a classification scheme(6), a BCF range of less than 0.3-0.9(7) suggests the potential for bioconcentration in aquatic organisms is low(SRC). Piperazine may biodegrade in water based on greater than 51% biodegradation measured after 28 days in a artificial river water total organic carbon (TOC) die-away test; however, only 1.4% degradation occurred after 14 days during a MITI screening test(7,8). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), piperazine, which has a vapor pressure of 0.16 mm Hg at 20 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase piperazine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 2.3 hours(SRC), calculated from its rate constant of 1.7X10-10 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Piperazine does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight(4). Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Wie CAS 110-85-0 auf dieser Website verwendet wird

CAS 110-85-0 ist die Kennung des Chemical Abstracts Service, mit der diese Seite einem bestimmten Stoff zugeordnet wird. Im aktuellen Datenbestand hat 1 EU-Anhangseintrag diese Kennung; so können Sie gegenprüfen, ob derselbe Stoff in einem oder in mehreren regulatorischen Zusammenhängen auftaucht.

Nutzen Sie diese Seite, wenn eine Lieferantenspezifikation, ein Sicherheitsdatenblatt oder ein Rohstoffdossier CAS 110-85-0 nennt und Sie alle verknüpften Einträge der Anhänge II–VI an einem Ort sehen möchten. Die Eintragskarten oben sind der schnellste Weg zu Konzentrationsgrenzen, Warnhinweisen, Anhangszuordnung und Produktartbedingungen.

Häufig gestellte Fragen

Ein durch CAS 110-85-0 identifizierter Stoff kann in mehreren Anhängen der EU-Kosmetikverordnung vorkommen, wenn er in unterschiedlichen Zusammenhängen unterschiedlichen Bedingungen unterliegt. Ein Stoff kann beispielsweise nach Anhang III mit bestimmten Bedingungen beschränkt sein, und dieselbe CAS-Nummer kann auch in Anhang IV als zugelassener Farbstoff unter eigenen Eintragsbedingungen erscheinen. Jeder Eintrag muss einzeln geprüft werden.

Gleichen Sie die CAS-Nummer mit den Spezifikationsblättern und Analysenzertifikaten Ihrer Rohstoffe ab. Erscheint eine CAS-Nummer in Anhang II, prüfen Sie die Abwesenheit des Stoffs. Erscheint sie in Anhang III, prüfen Sie, ob Konzentrationsgrenzen und Produktartbedingungen in Ihrer Rezeptur eingehalten werden. Alle Anhangseinträge mit dieser CAS-Nummer sind oben aufgeführt.

Eine CAS-Nummer wird vom Chemical Abstracts Service (USA) vergeben und ist weltweit anerkannt. Eine EC-Nummer ist eine Kennung der Europäischen Kommission aus Verzeichnissen wie EINECS, ELINCS oder der NLP-Liste. Beide Kennungen können in Einträgen der EU-Kosmetikanhänge vorkommen. Manche Stoffe haben beide, manche nur eine, und einige ältere Einträge haben möglicherweise keine von beiden.

Der INCI-Checker akzeptiert Inhaltsstoffnamen, CAS-Nummern und EC-Nummern. Prüfen Sie diese CAS-Nummer direkt und gleichen Sie das Ergebnis anschließend mit den Spezifikationsblättern der Lieferanten und allen verknüpften Anhangsbedingungen ab.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Eine vollständige INCI-Liste prüfen und anschließend mit CAS 110-85-0 Lieferantendokumente zu den gefundenen Stoffen gegenprüfen.

INCI-Checker

Anhänge durchsuchen

Alle Anhänge der EU-Kosmetikverordnung nach Kategorie durchsuchen.

Alle Anhänge

Nach Name suchen

Nach INCI-Namen, Aliasen oder verwandten Kennungen suchen, die in Ihrer Dokumentation neben CAS 110-85-0 stehen.

Suche