BENZOPHENONE-3
2-Hydroxy-4-methoxybenzophenone / Oxybenzone
BENZOPHENONE-3 steht in Anhang VI als Eintrag der Positivliste für UV-Filter in kosmetischen Mitteln der EU. Höchstkonzentration in diesem Eintrag: a) 6% b) 2,2% c) 0,5% Footnote 1: However, cosmetic products containing '2-Hydroxy-4-methoxy-benzophenone/Oxybenzone' and complying with the restrictions set out in Regulation (EC) No 1223/2009 as applicable on 27 July 2022 may be placed on the Union market until 28 January 2023 and be made available on the Union market until 28 July 2023..
Diesen Eintrag lesen
Benzophenone-3 has two jobs in a formula — UV filter and protector of the formulation itself — and this entry sets different ceilings depending on which one it is doing.
- Face, hand and lip products (excluding sprays): 6%. Body products including sprays: 2.2%. Other products: 0.5%.
- Used at 0.5% to protect the formulation, the UV-filter content must not exceed 5.5% in group (a) or 1.7% in group (b).
- 'Contains Benzophenone-3' must appear on the label, unless the concentration is 0.5% or less and it is there only to protect the product.
- The current limits arrived with Regulation (EU) 2022/1176; the transition ended 28 January 2023.
This entry is harder to read than most because a single ingredient is doing two things. Benzophenone-3 absorbs UV, which is why it is in Annex VI at all, and it also protects a formulation from degrading in light. The regulation treats those uses separately: the 0.5% figure is the protective use, and the 5.5% and 1.7% ceilings limit how much UV-filter content may sit alongside it in each product group.
The labelling rule follows the same logic. 'Contains Benzophenone-3' is required for face, hand, lip and body products — but not when the substance is present at 0.5% or less and only to protect the product. The label is telling a reader about a UV filter, so it is not required when the substance is not acting as one.
The limits here are the ones Regulation (EU) 2022/1176 set after the SCCS reassessed the substance. Products meeting the previous conditions could be placed on the market until 28 January 2023, so a formula written against older guidance is not merely out of date — it is outside a transition that has closed.
Geprüft anhand von
Eintragsdetails
Höchstkonzentration
a) 6% b) 2,2% c) 0,5% Footnote 1: However, cosmetic products containing '2-Hydroxy-4-methoxy-benzophenone/Oxybenzone' and complying with the restrictions set out in Regulation (EC) No 1223/2009 as applicable on 27 July 2022 may be placed on the Union market until 28 January 2023 and be made available on the Union market until 28 July 2023.
Produktart
Sonstige Beschränkungen
a) If used at 0,5 % to protect product formulation, the levels used as UV filter must not exceed 5,5 %.
b) If used at 0,5 % to protect product formulation, the levels used as UV filter must not exceed 1,7 %.
Warnhinweise
For a) and b): Contains Benzophenone-3 (*)
Footnote (*): Not required if concentration is 0,5 % or less and when it is used only for product protection purposes.
INCI-Glossarname
BENZOPHENONE-3
Chemische Bezeichnung
2-Hydroxy-4-methoxybenzophenone / Oxybenzone
Chemische / IUPAC-Bezeichnung
2-Hydroxy-4-methoxybenzophenone / Oxybenzone
Regulatorische Informationen
SCCS-Gutachten
Identifizierte Inhaltsstoffe
Kerndaten
Chemische Identität und Eigenschaften

2-Hydroxy-4-methoxybenzophenone
Oxybenzone is a hydroxybenzophenone that is benzophenone which is substituted at the 2- and 4-positions of one of the benzene rings by hydroxy and methoxy groups respectively. It has a role as a xenobiotic, a dermatologic drug, a protective agent, an ultraviolet filter and an environmental contaminant. It is a hydroxybenzophenone and a monomethoxybenzene. — ChEBI
- IUPAC-Name
- (2-hydroxy-4-methoxyphenyl)-phenylmethanone
- Summenformel
- C14H12O3
- Molekulargewicht
- 228.24 g/mol
- Exakte Masse
- 228.078644241 Da
- XLogP3
- 3,6
- Topologische polare Oberfläche
- 46,5 Ų
- Wasserstoffbrücken-Donoren
- 1
- Wasserstoffbrücken-Akzeptoren
- 3
- Kovalente Einheiten
- 1
- Definierte Stereozentren
- 0
Auch bekannt als
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:34283
- ChEMBL:CHEMBL1625
- EPA DTXSID:DTXSID3022405
- PubMed:23124194
- PubMed:23064701
- PubMed:23062433
- PubMed:23037998
- PubMed:23035447
- PubMed:22960327
- PubMed:22884209
- PubMed:22803593
- PubMed:22790701
- PubMed:22749456
- PubMed:22738849
- PubMed:22721600
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 302 to 320 °F at 5 mmHg (NTP, 1992) Quelle: CAMEO Chemicals
- Boiling Point: 155 °C at 5.00E+00 mm Hg Quelle: DrugBank
- Color/Form: Colorless crystals Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Crystals from isopropanol Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: White yellowish, cream colored powder Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Pale yellow powder Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.32 at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 100 °C (212 °F) - closed cup Quelle: Hazardous Substances Data Bank (HSDB)
- LogP: 3.79 Quelle: DrugBank
- LogP: log Kow = 3.79 Quelle: Hazardous Substances Data Bank (HSDB)
- LogP: 3.79 Quelle: Human Metabolome Database (HMDB)
- Melting Point: 151 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Melting Point: 65.5 °C Quelle: DrugBank
- Melting Point: 65.5 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: 65.5 °C Quelle: Human Metabolome Database (HMDB)
- Odor: Weak odor Quelle: Hazardous Substances Data Bank (HSDB)
- Odor: Almost odorless or faint characteristic Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: 2-hydroxy-4-methoxybenzophenone appears as white to off-white or light yellow powder. (NTP, 1992) Quelle: CAMEO Chemicals
- Physical Description: Liquid; Dry Powder Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless solid; [Hawley] Pale yellow powder; [MSDSonline] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Solid Quelle: Human Metabolome Database (HMDB)
- Solubility: less than 1 mg/mL at 68 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Solubility: In water, 3.7 mg/L at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Readily soluble in most organic solvents; freely soluble in alcohol and toluene; practically insoluble in water Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in carbon tetrachloride Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in various solvents (in percent): ethanol, 6%; acetone, >20%; chloroform, >20%; glycerin,<0.01%; isopropyl stearate, 9%; olive oil, 9%; peanut oil, 9% Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 1.28e-01 g/L Quelle: Human Metabolome Database (HMDB)
- Vapor Pressure: 0.00000142 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Substance: 2-Hydroxy-4-methoxybenzophenone Quelle: NTP Technical Reports
- NTP Technical Report: TR-597: Toxicology and Carcinogenesis Studies of 2-Hydroxy-4- methoxybenzophenone (CASRN 131-57-7) Administered in Feed to Sprague Dawley (Hsd:Sprague Dawley SD) Rats and B6C3F1/N Mice (2020 ) Quelle: NTP Technical Reports
- Peer Review Date: 12/12/19 Quelle: NTP Technical Reports
- Conclusion for Male Rat: Equivocal Evidence Quelle: NTP Technical Reports
- Conclusion for Female Rat: Equivocal Evidence Quelle: NTP Technical Reports
- Conclusion for Male Mice: No Evidence Quelle: NTP Technical Reports
- Conclusion for Female Mice: No Evidence Quelle: NTP Technical Reports
- Summary: Under the conditions of these 2-year studies, there was equivocal evidence of carcinogenic activity of 2H4MBP exposure in male Hsd:Sprague Dawley SD rats based on the occurrence of malignant meningiomas in the brain. There was equivocal evidence of carcinogenic activity in female Hsd:Sprague Dawley SD rats based on the increased incidence of thyroid C-cell adenomas and the increased incidence of uterine stromal polyps. There was no evidence of carcinogenic activity in male or female B6C3F1/N mice at exposure concentrations of 1,000, 3,000, and 10,000 ppm.; Increases in the incidences of nonneoplastic lesions of the testis in male rats and of the uterus and adrenal cortex in female rats occurred with exposure to 2H4MBP. Increases in the incidences of nonneoplastic lesions of the bone marrow (males and females), spleen (males and females), kidney (males and females), and liver (males) in mice occurred with exposure to 2H4MBP. Quelle: NTP Technical Reports
- Carcinogen Classification: No indication of carcinogenicity to humans (not listed by IARC). Quelle: Toxin and Toxin Target Database (T3DB)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
- Note: This chemical does not meet GHS hazard criteria for 6% (116 of 1945) of reports. Quelle: European Chemicals Agency (ECHA)
- Signal: Warning Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H315 (70.2%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (70.2%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (69.3%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H400 (14.3%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H411 (24.3%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P264, P264+P265, P271, P273, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 1945 reports by companies from 26 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 116 of 1945 reports by companies.; There are 24 notifications provided by 1829 of 1945 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Warning Quelle: NITE-CMC
- GHS Hazard Statements: H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P273, P280, P318, P391, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- GHS Hazard Statements: H317: May cause an allergic skin reaction [Warning Sensitization, Skin] Quelle: NITE-CMC
- Precautionary Statement Codes: P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Warning Quelle: Hazardous Substances Data Bank (HSDB)
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: Hazardous Substances Data Bank (HSDB)
- Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Quelle: Cosmetic Ingredient Review (CIR)
- Toxicity Summary: IDENTIFICATION AND USE: 2-Hydroxy-4-methoxybenzophenone (Benzophenone-3; BP-3) forms crystals or powder. It is used as an ultraviolet light absorber and stabilizer, especially in plastics and paints. It is also used as a broad-band UV filter in concentrations of up to 10% in sunscreen products alone or in combination with other UV filters. It serves not only to prevent sunburn but also to protect against the photodynamic, photosensitizing, and phototoxic effects of various drugs. HUMAN STUDIES: Photosensitivity to the UV-blocking agent benzophenone-3 has been reported. ANIMAL STUDIES: Benzophenone-3 was not a skin sensitizer in mice. Mice received benzophenone-3 in concentrations of 0; 3,125; 6,250; 12,500; 25,000 and 50,000 ppm in the diet for 13 weeks. The following effects were noted: 554 mg/kg bw/day: no adverse effects noted. 1,246 mg/kg bw/day: increased liver weight. 2,860 mg/kg bw/day: increased liver weight. 6,780 mg/kg bw/day: decreased body weight gain in males and females; increased liver weight; minimal cytoplasmic vacuolisation of hepatocytes. 16,238 mg/kg bw/day: decreased body weight gain in males and females; minimal renal lesions in males; increased liver weight; Quelle: Hazardous Substances Data Bank (HSDB)
- Toxicity Summary: Oxybenzone absorbs UV-A ultraviolet rays, preventing them from reaching the skin. Quelle: Toxin and Toxin Target Database (T3DB)
- Environmental Bioconcentration: BCFs of 39-160 and 33-156 were reported in fish for 2-hydroxy-4-methoxybenzophenone, using carp (Cyprinus carpio) which were exposed over an 10-week period at respective concentrations of 0.1 and 0.01 mg/L(1). According to a classification scheme(2), this BCF range suggests the bioconcentration in aquatic organisms is moderate to high. Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: Bioaccumulation and trophic transfer in ecosystems is an important criterion for assessing environmental risks of contaminants. This study investigated bioaccumulation and biomagnification of 13 organic ultraviolet absorbents (UVAs) in marine wildlife organisms in the Pearl River Estuary, South China Sea. The UVAs could accumulate in the organisms with biota - sediment accumulation factors (BSAF) of 0.003-2.152. UV531 was the most abundant and showed the highest tendency to accumulate in the organisms with a median BSAF of 1.105. The UVAs demonstrated species - and compound-specific accumulation in the marine organism. Fishes showed significantly higher capability than the cephalopods and crustaceans in accumulation of the UVAs. Habitat did not demonstrate obvious impact on accumulation of the UVA. On the other hand, benzophenone-3, UV328, and UV234 showed significantly higher concentration in the detritus feeding fishes than carnivorous and planktivorous fishes, suggesting governing effect of dietary habits of the organisms on bioaccumulation of these UVAs. Direct uptake from growth media was a significant exposure pathway of the organisms to the UVAs. The estimated trophic magnif Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 950(SRC), determined from a structure estimation method(2), indicates that 2-hydroxy-4-methoxybenzophenone is expected to have low mobility in soil(SRC). The estimated pKa of 2-hydroxy-4-methoxybenzophenone is 7.1(3), indicating that this compound will exist partially in anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of the anion from moist soil is not expected because anions do not volatilize(SRC). Volatilization of neutral 2-hydroxy-4-methoxybenzophenone from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.5X10-8 atm-cu m/mole(SRC), using a fragment constant estimation method(5). 2-Hydroxy-4-methoxybenzophenone is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 6.6X10-6 mm Hg at 25 °C(SRC), determined from a fragment constant method(2). A 4% of Theoretical BOD using activated sludge in the Japanese MITI test suggests that 2-hydroxy-4-methoxybenzophenone is no Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 950(SRC), determined from a structure estimation method(2), indicates that 2-hydroxy-4-methoxybenzophenone is expected to adsorb to suspended solids and sediment(SRC). An estimated pKa of 7.1(3) indicates 2-hydroxy-4-methoxybenzophenone will exist partially in the anion form at pH values of 5 to 9 and, therefore, volatilization from water surfaces of the anion is not expected to be an important fate process(SRC). Volatilization from water surfaces of neutral 2-hydroxy-4-methoxybenzophenone is not expected(4) based upon an estimated Henry's Law constant of 1.5X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(5). 2-Hydroxy-4-methoxybenzophenone did not undergo hydrolysis or volatilization in sterile controls incubated at 25 °C for 42 days(6). According to a classification scheme(7), BCFs of 33-160, reported for 2-hydroxy-4-methoxybenzophenone in carp (Cyprinus carpio), exposed over an 10-week period(8), suggest bioconcentration in aquatic organisms is moderate to high. 2-Hydroxy-4-methoxybenzophenone may biodegrade, based on half-lives of 10.7 and 4.2-8.7 days under aerobic and Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2-hydroxy-4-methoxybenzophenone, which has an estimated vapor pressure of 6.6X10-6 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase 2-hydroxy-4-methoxybenzophenone is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 1.9 hours(SRC), calculated from its rate constant of 2.0X10-10 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(2). Particulate-phase 2-hydroxy-4-methoxybenzophenone may be removed from the air by wet and dry deposition(SRC). 2-Hydroxy-4-methoxybenzophenone absorbs light at maximum of 287 nm with absorption extending to 400 nm(3) and, therefore, may be susceptible to direct photolysis by sunlight. Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: UV stabilizer; Fragrance Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: UV stabilizer Quelle: EPA Chemical Data Reporting (CDR)
- Cosmetic Ingredient Review Link: CIR ingredient: Benzophenone-3 Quelle: Cosmetic Ingredient Review (CIR)
- Sources/Uses: Used as an ultraviolet light absorber and stabilizer (especially in plastics), photostabilizer for synthetic resins, and topical sunscreen agent; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Plastic Composites Manufacturing [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Sunscreening Agents. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: For 2-hydroxy-4-methoxybenzophenone (USEPA/OPP Pesticide Code: 000691) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: An ultraviolet light absorber and stabilizer, especially in plastics and paints. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Benzophenone-3 (BZ-3) is one of the UV-absorbing agents that has been used in industry and medicine for more than 30 years. Millions of consumers are exposed to benzophenones on a daily basis owing to the widespread use of these compounds in many of the products on the market, such as lipsticks, hair sprays, hair dyes, shampoo and detergent bars and sunscreen lotions. ... Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for 2-Hydroxy-4-methoxybenzophenone (7 total), please visit the HSDB record page. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Used as an ingredient in sunscreen and other cosmetics. Quelle: Toxin and Toxin Target Database (T3DB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Verzeichnisverknüpfungen für BENZOPHENONE-3
Verwandte Einträge zu BENZOPHENONE-3
POTASSIUM CHLORATE / SODIUM CHLORATE
ISOEUGENOL
Alpha-Damascone/cis-Rose ketone 1/trans-Rose ketone 1; Rose ketone 4 (Damascone); Rose ketone 3 (de…
Was Anhang VI für BENZOPHENONE-3 bedeutet
BENZOPHENONE-3 ist ein zugelassener UV-Filter, der in Anhang VI der EU-Kosmetikverordnung (EG) Nr. 1223/2009 aufgeführt ist. Nur UV-Filter dieser Positivliste dürfen für den UV-Schutz in kosmetischen Mitteln der EU verwendet werden.
Die in diesem Eintrag festgelegte zulässige Höchstkonzentration gilt für das gebrauchsfertige Produkt. Einige UV-Filter sind auf bestimmte Anwendungsarten beschränkt oder erfordern Warnhinweise auf dem Etikett.
Dieser Eintrag ist zum Abgleich von Namen und Kennungen mit 1 Inhaltsstoff des CosIng-Verzeichnisses verknüpft. Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.
Compliance-Checkliste
- Die Konzentration im gebrauchsfertigen Produkt darf nicht überschreiten: a) 6% b) 2,2% c) 0,5% Footnote 1: However, cosmetic products containing '2-Hydroxy-4-methoxy-benzophenone/Oxybenzone' and complying with the restrictions set out in Regulation (EC) No 1223/2009 as applicable on 27 July 2022 may be placed on the Union market until 28 January 2023 and be made available on the Union market until 28 July 2023.
- Prüfen Sie, ob der UV-Filter sowohl für Produkte, die auf der Haut verbleiben, als auch für abzuspülende Produkte zugelassen ist.
- Geben Sie, soweit erforderlich, Lichtschutzfaktor- oder UV-Schutz-Warnhinweise an.
Häufig gestellte Fragen
Quellenhinweis zu Anhang VI, Eintrag BENZOPHENONE-3
Diese Seite fasst einen Eintrag aus Anhang VI für BENZOPHENONE-3 aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.
Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang VI für BENZOPHENONE-3 zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.
Werkzeuge und nächste Schritte
Rezeptur prüfen
Fügen Sie eine vollständige INCI-Liste ein, um BENZOPHENONE-3 und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.
INCI-CheckerEinträge vergleichen
BENZOPHENONE-3 nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.
VergleichenDen Anhang durchsuchen
Alle Einträge in Anhang VI ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.
Anhang VI öffnen