Zum Hauptinhalt springen
Anhang III Eintrag 337 Geändert 3 Okt 2023

Linalyl Acetate

3,7-Dimethyl octa-1,6-diene-3-yl acetate

Linalyl Acetate ist in Anhang III aufgeführt und darf nur unter den in diesem Eintrag genannten Bedingungen verwendet werden.

Beschränkter Stoff— Anhang III, EU-Verordnung (EG) Nr. 1223/2009
Eintrag: 337

Eintragsdetails

Sonstige Beschränkungen

The presence of the substance shall be indicated in the list of ingredients referred to in Article 19(1), point (g), when its concentration exceeds: — 0,001 % in leave-on products — 0,01 % in rinse-off products.

INCI-Glossarname

Linalyl Acetate

Chemische Bezeichnung

3,7-Dimethyl octa-1,6-diene-3-yl acetate

Regulatorische Informationen

Verordnung

(EU) 2023/1545

Alle Einträge anzeigen, die dieser Rechtsakt festgelegt hat

Identifizierte Inhaltsstoffe

Kerndaten

Anhang
Eintragsnummer
337

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 115-95-7
CAS 115-95-7PubChem CID 8294

Linalyl Acetate

3,7-dimethylocta-1,6-dien-3-yl acetate is a monoterpenoid that is the acetate ester of linalool. It forms a principal component of the essential oils from bergamot and lavender. It is a monoterpenoid and an acetate ester. It is functionally related to a linalool. — ChEBI

IUPAC-Name
3,7-dimethylocta-1,6-dien-3-yl acetate
Summenformel
C12H20O2
Molekulargewicht
196.29 g/mol
Exakte Masse
196.146329876 Da
XLogP3
3,3
Topologische polare Oberfläche
26,3 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
2
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

Linalool acetateBergamiolBergamolLynalyl acetateLinalol acetateLicareol acetateAcetic acid linalool ester3,7-Dimethyl-1,6-octadien-3-ol acetate
16 weitere gemeldete Namen
3,7-Dimethyl-1,6-octadien-3-yl acetate1,6-Octadien-3-ol, 3,7-dimethyl-, acetate1,6-Octadien-3-ol, 3,7-dimethyl-, 3-acetateFEMA No. 26365K47SSQ51G3,7-Dimethyl-1,6-ctadien-3-ol acetateNSC-2138(1)-1,5-Dimethyl-1-vinylhex-4-enyl acetateCHEBI:78333CHEBI:6469Ex bois de roseRefChem:421711,5-Dimethyl-1-vinylhex-4-enyl acetate204-116-4254-806-4Ex bois de rose (synthetic)
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer8294

Attributed physical-property, hazard, environmental and use annotations.

  • Note: This chemical does not meet GHS hazard criteria for 13.5% (316 of 2347) of reports. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H315 (85.5%): Causes skin irritation [Warning Skin corrosion/irritation]; H317 (12.2%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (85.3%): Causes serious eye irritation [Warning Serious eye damage/eye irritation] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P264, P264+P265, P272, P280, P302+P352, P305+P351+P338, P321, P332+P317, P333+P317, P337+P317, P362+P364, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2347 reports by companies from 25 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 316 of 2347 reports by companies.; There are 24 notifications provided by 2031 of 2347 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard] Quelle: NITE-CMC
  • Precautionary Statement Codes: P210, P261, P264, P271, P272, P273, P280, P302+P352, P304+P340, P319, P321, P332+P317, P333+P317, P362+P364, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Signal: Warning Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin] Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • Precautionary Statement Codes: P261, P264, P272, P280, P302+P352, P321, P332+P317, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • Signal: Warning Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: IDENTIFICATION AND USE: Linalyl acetate is a clear, colorless, oily liquid. It is an excellent fragrance material. It can also be employed in soaps and detergents and as a food additive. It is a component of oil paint. It is used in extracts and as a substitute for petitgrain oil. HUMAN EXPOSURE AND TOXICITY: Application of linalyl acetate in acetone (33%) to the back of male volunteers without known allergies during 48 hours under occlusion did not induce signs of irritation up to 120 hours after removal of the patch. Linalyl acetate is identified as one of the constituents of lavender oil that may cause allergic reactions. Oxidized linalyl acetate could be a common fragrance contact allergen. The potential genotoxicity of linalyl acetate, was evaluated in vitro by the micronucleus test on peripheral human lymphocytes. In the range of non-toxic concentrations (0.5-100 ug/mL), linalyl acetate increased the frequency of micronuclei significantly and in concentration-dependent manner. In a chromosome aberration test with human lymphocytes, linalyl acetate did not induce aberrations, both with and without S-9 mix. ANIMAL STUDIES: Inhalation exposure of mice to 2.74 mg linalyl acetate/ Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 180 was calculated in fish for linalyl acetate(SRC), using a log Kow of 3.93(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 430(SRC), determined from a structure estimation method(2), indicates that linalyl acetate is expected to have moderate mobility in soil(SRC). Volatilization of linalyl acetate from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.7X10-4 atm-cu m/mole(SRC), using a fragment constant estimation method(2). Linalyl acetate has a reported vapor pressure of 0.111 mm Hg(3) and exists as a liquid under environmental conditions; therefore, linalyl acetate may volatilize from dry soil(SRC). A 75% of Theoretical BOD using activated sludge in the Japanese MITI test(4) suggests that biodegradation is an important environmental fate process in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 430(SRC), determined from a structure estimation method(2), indicates that linalyl acetate is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 1.7X10-3 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 4.8 hours and 5.8 days, respectively(SRC). The hydrolysis half-life is <24 hours at 20 °C, with expected end products of linalool and acetic acid(4). According to a classification scheme(5), an estimated BCF of 180(SRC), from its log Kow of 3.93(6) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is high(SRC). A 75% of Theoretical BOD using activated sludge in the Japanese MITI test(4) suggests that biodegradation is an important environmental fate process in water(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), linalyl acetate, which has a vapor pressure of 0.111 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase linalyl acetate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and ozone(SRC); the half-lives for these reactions in air are estimated to be 200 and 38 minutes, respectively(SRC), calculated from respective rate constants of 1.2X10-10 and 4.3X10-16 cu cm/molecule-sec at 25 °C(SRC) that were derived using structure estimation methods(3). Linalyl acetate may also react with nitrate radicals in the atmosphere(4). Linalyl acetate does not contain chromophores that absorb at wavelengths >290 nm(5) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Present in bergamot, lavender, and other volatile oils; [Merck Index] Used in perfumes, soaps, cleaning products, cosmetics, oil paints, and flavoring extracts; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Painting (Solvents) [Category: Paint] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Extracts, perfumery, flavoring agent, substitute for petitgrain oil. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: /In perfumery/ it is widely used as a fresh and sweet blender. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: It is an excellent fragrance material for, among others, bergamot, lilac, lavender, linden, neroli, ylang-ylang, and phantasy notes (particularly chypre). Smaller amounts are used in other citrus products. Since linalyl acetate is fairly stable toward alkali, it can also be employed in soaps and detergents. Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: Reported uses (ppm): (Flavor and Extract Manufacturers' Association, 1994); Table: Reported uses (ppm): (Flavor and Extract Manufacturers' Association, 1994) [Table#1850] Quelle: Hazardous Substances Data Bank (HSDB)
  • Uses: /Lynalyl acetate/ is used as an intermediate and found in soaps, cleaning products and cosmetics (perfume) ... . It is a component of oil paint, is used in extracts and as a substitute for petitgrain oil ... Linalyl acetate is a food additive. Foodstuffs contain between 1.9 (soft drinks) and 13 ppm (chewing gum) linalyl acetate ... . The Danish product register indicates that linalyl acetate is a constituent of several industrial products (odor agents, cleaning/washing agents, cosmetics, absorbents and adsorbents, process regulators, welding and soldering agents, non-agricultural pesticides and preservatives, surface treatment). The total amount per product of the substance was 2% or less, except in odor agents (<20%) ... . The Norwegian Product register indicates that linalyl acetate is used in car polish (wax), ordinary cleaning products and detergents (for textile). The content in the products is between 0 and 1% ... . Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Verzeichnisverknüpfungen für Linalyl Acetate

Verzeichnis Identified ingredient
Ref. 77311

LINALYL ACETATE

CAS: 115-95-7
EC: 204-116-4

Für diesen Eintrag gibt es nur wenige direkte Treffer; daher werden auch nahe liegende Einträge aus Anhang III angezeigt.

Anhang III 338
Nahe liegender Eintrag im selben Anhang

Menthol

CAS: 89-78-1 / 1490-04-6 / 2216-51-5 / 15356-60-2
EC: 201-939-0 / 216-074-4 / 218-690-9 / 239-387-8
Anhang III 335
Nahe liegender Eintrag im selben Anhang

Hexadecanolactone

CAS: 109-29-5
EC: 203-662-0
Anhang III 340
Nahe liegender Eintrag im selben Anhang

Salicylaldehyde

CAS: 90-02-8
EC: 201-961-0
Anhang III 333
Nahe liegender Eintrag im selben Anhang

Carvone

CAS: 99-49-0 / 6485-40-1 / 2244-16-8
EC: 202-759-5 / 229-352-5 / 218-827-2
Anhang III 341
Nahe liegender Eintrag im selben Anhang

Santalol

CAS: 11031-45-1 / 115-71-9 / 77-42-9
EC: 234-262-4 / 204-102-8 / 201-027-2
Anhang III 342
Nahe liegender Eintrag im selben Anhang

Sclareol

CAS: 515-03-7
EC: 208-194-0
Anhang III 331
Nahe liegender Eintrag im selben Anhang

Camphor

CAS: 76-22-2 / 21368-68-3 / 464-49-3 / 464-48-2
EC: 200-945-0 / 244-350-4 / 207-355-2 / 207-354-7
Anhang III 343
Nahe liegender Eintrag im selben Anhang

Terpineol

CAS: 8000-41-7 / 98-55-5 / 138-87-4 / 586-81-2
EC: 232-268-1 / 202-680-6 / 205-342-6 / 209-584-3

Was Anhang III für Linalyl Acetate bedeutet

Linalyl Acetate ist ein beschränkter Stoff nach Anhang III der EU-Kosmetikverordnung (EG) Nr. 1223/2009. Seine Verwendung in kosmetischen Mitteln ist nur unter den im obigen Eintrag genannten besonderen Bedingungen zulässig, einschließlich geltender Konzentrationsgrenzen, Beschränkungen der Produktart und erforderlicher Warnhinweise.

Wird dieser Stoff in einer Rezeptur verwendet, müssen alle Bedingungen – Höchstkonzentration, Produktbereich und Warnhinweise – gleichzeitig erfüllt sein. Die Einhaltung einer Bedingung hebt die anderen nicht auf.

Dieser Eintrag ist zum Abgleich von Namen und Kennungen mit 1 Inhaltsstoff des CosIng-Verzeichnisses verknüpft. Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.

Compliance-Checkliste

  • Dokumentieren Sie die Verwendungsbedingungen in der Produktinformationsdatei (PIF).

Häufig gestellte Fragen

Linalyl Acetate ist in Anhang III der Verordnung (EG) Nr. 1223/2009 als beschränkter Stoff aufgeführt. Er darf nur unter den im Eintrag festgelegten Bedingungen verwendet werden, einschließlich einer etwaigen Höchstkonzentration, Beschränkung der Produktart und der oben genannten erforderlichen Warnhinweise.

CAS 115-95-7 ist die eindeutige numerische Kennung, die der Chemical Abstracts Service Linalyl Acetate zugewiesen hat. In der Compliance-Arbeit für kosmetische Mittel dient die CAS-Nummer dazu, den Stoff über regulatorische Datenbanken, Rohstoffspezifikationen und Sicherheitsbewertungsberichte hinweg abzugleichen. Mehrere EU-Anhangseinträge können dieselbe CAS-Nummer haben, wenn derselbe Stoff unter unterschiedlichen Bedingungen oder in verschiedenen Anhängen erscheint.

Fügen Sie Ihre vollständige Inhaltsstoffliste (INCI) in den INCI-Checker auf dieser Website ein und gleichen Sie sie mit allen Einträgen der Anhänge II–VI ab. Das Werkzeug hebt alle Inhaltsstoffe hervor, die mit beschränkten, verbotenen oder als Allergen markierten Einträgen übereinstimmen. Das ist nützlich für die schnelle Compliance-Prüfung von Rezepturen fertiger Produkte oder von Rohstoffdeklarationen.

Quellenhinweis zu Anhang III, Eintrag Linalyl Acetate

Diese Seite fasst einen Eintrag aus Anhang III für Linalyl Acetate aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.

Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang III für Linalyl Acetate zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Fügen Sie eine vollständige INCI-Liste ein, um Linalyl Acetate und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.

INCI-Checker

Einträge vergleichen

Linalyl Acetate nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.

Vergleichen

Den Anhang durchsuchen

Alle Einträge in Anhang III ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.

Anhang III öffnen