Zum Hauptinhalt springen
Anhang II Eintrag 1465 CMRGeändert 30 Jul 2020

Molybdenum trioxide

Molybdenum trioxide ist in Anhang II als verbotener Stoff für kosmetische Mittel aufgeführt, die in der EU in Verkehr gebracht werden.

Verbotener Stoff— Anhang II, EU-Verordnung (EG) Nr. 1223/2009
Eintrag: 1465
CMR

Eintragsdetails

Chemische Bezeichnung

Molybdenum trioxide

Chemische / IUPAC-Bezeichnung

Molybdenum trioxide

Regulatorische Informationen

Verordnung

(EU) 2019/831

Alle Einträge anzeigen, die dieser Rechtsakt festgelegt hat

CMR

KategorieCarcinogenicMutagenicReprotoxic
Cat. 2✓——

Kerndaten

Anhang
Eintragsnummer
1465

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 1313-27-5
CAS 1313-27-5PubChem CID 14802

Molybdenum trioxide

Molybdenum trioxide is a molybdenum oxide. — ChEBI

IUPAC-Name
trioxomolybdenum
Summenformel
MoO3
Molekulargewicht
143.95 g/mol
Exakte Masse
145.890147 Da
Topologische polare Oberfläche
51,2 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
3
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

Molybdenum(VI) oxideMolybdic anhydrideMolybdenum oxide (MoO3)MoO3Molybdic trioxideMolybdenaMolybdic acid anhydrideMolybdic oxide
16 weitere gemeldete Namen
Molybdenum peroxideMolybdenumperoxideNatural molybditeMolybdenum anhydride22FQ3F03YSMo 1202TNSC-215191CHEBI:30627RefChem:159392215-204-7Molybdenum oxide (MoO5)Mo-1202TMolybdenum (VI) oxideCCRIS 1163HSDB 1661EINECS 215-204-7
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer14802

Attributed physical-property, hazard, environmental and use annotations.

  • Physical Description: Molybdenum trioxide appears as colorless to white or yellow odorless solid. Sinks in water. (USCG, 1999) Quelle: CAMEO Chemicals
  • Physical Description: Large Crystals; CBI; Dry Powder; Other Solid; Wet Solid; Liquid; Dry Powder; Other Solid; Dry Powder; Large Crystals Quelle: EPA Chemical Data Reporting (CDR)
  • Physical Description: White or slightly yellow to slightly bluish solid; [Merck Index] Light green odorless powder; Partially soluble in water (1.07 g/L at 18 deg C); [MSDSonline] A soluble compound; [ACGIH] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • Signal: Warning Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P261, P264+P265, P271, P280, P304+P340, P305+P351+P338, P318, P319, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Warning Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H319 (> 99.9%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (> 99.9%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H351 (99.8%): Suspected of causing cancer [Warning Carcinogenicity] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P261, P264+P265, P271, P280, P304+P340, P305+P351+P338, P318, P319, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1297 reports by companies from 31 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P271, P280, P304+P340, P305+P351+P338, P318, P319, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P264, P270, P280, P301+P316, P308+P316, P318, P319, P321, P330, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Consumer Uses: Catalyst; Corrosion inhibitor; Not Known or Reasonably Ascertainable; Intermediate; Alloys; Lubricating agent; Other Quelle: EPA Chemical Data Reporting (CDR)
  • Industry Uses: Other; Lubricating agent; Alloys; Flame retardant; Corrosion inhibitor; Not Known or Reasonably Ascertainable; Catalyst; Intermediate Quelle: EPA Chemical Data Reporting (CDR)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Für diesen Eintrag gibt es nur wenige direkte Treffer; daher werden auch nahe liegende Einträge aus Anhang II angezeigt.

Anhang II 1468
Nahe liegender Eintrag im selben Anhang

Furfuryl alcohol

CAS: 98-00-0
EC: 202-626-1
Anhang II 1460
Nahe liegender Eintrag im selben Anhang

Nickel(II) trifluoroacetate; [1] Nickel(II) propionate; [2] Nickel bis(benzenesulfonate); [3] Nicke…

CAS: 16083-14-0[1] 3349-08-4[2] 39819-65-3[3] 18721-51-2[4] 18283-82-4[5] 22605-92-1[6] 4454-16-4[7] 7580-31-6[8] 93983-68-7[9] 29317-63-3[10] 27637-46-3[11] 84852-37-9[12] 93920-10-6[13] 85508-43-6[14] 85508-44-7[15] 51818-56-5[16] 93920-
EC: 240-235-8[1] 222-102-6[2] 254-642-3[3] 242-533-3[4] 242-161-1[5] 245-119-0[6] 224-699-9[7] 231-480-1[8] 301-323-2[9] 249-555-2[10] 248-585-3[11] 284-349-6[12] 300-094-6[13] 287-468-1[14] 287-469-7[15] 257-447-1[16] 300-093-0[17] 276-

Was Anhang II für Molybdenum trioxide bedeutet

Molybdenum trioxide ist in Anhang II der EU-Kosmetikverordnung (EG) Nr. 1223/2009 als verbotener Stoff aufgeführt und darf nicht absichtlich zugesetzt werden. Artikel 17 regelt gesondert unbeabsichtigte geringe Mengen, die bei guter Herstellungspraxis technisch unvermeidbar und mit der Sicherheitsanforderung nach Artikel 3 vereinbar sind.

Rezepturentwickler müssen ihre Inhaltsstoffe und Rohstoffe prüfen, um sicherzustellen, dass keiner davon diesen Stoff enthält. Lieferanten sollten auf Anfrage eine Dokumentation vorlegen, die die Abwesenheit bestätigt.

Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.

Compliance-Checkliste

  • Prüfen Sie, dass dieser Stoff in allen Rohstoffen und fertigen Rezepturen nicht enthalten ist.
  • Fordern Sie von Rohstofflieferanten eine Abwesenheitsbestätigung oder ein Analysenzertifikat an.
  • Dokumentieren Sie das Prüfergebnis in der Produktinformationsdatei (PIF).
  • Dieser Stoff hat eine CMR-Einstufung. Prüfen Sie die CMR-Tabelle oben und den aktuellen Status nach Anhang II/III, bevor Sie ihn verwenden.

Häufig gestellte Fragen

Ja. Molybdenum trioxide ist in Anhang II der EU-Kosmetikverordnung (EG) Nr. 1223/2009 aufgeführt und als absichtlich zugesetzter kosmetischer Inhaltsstoff verboten. Artikel 17 sieht eine enge Ausnahme für unbeabsichtigte geringe Mengen vor, die bei guter Herstellungspraxis technisch unvermeidbar sind, sofern das Produkt nach Artikel 3 sicher bleibt.

CAS 1313-27-5 ist die eindeutige numerische Kennung, die der Chemical Abstracts Service Molybdenum trioxide zugewiesen hat. In der Compliance-Arbeit für kosmetische Mittel dient die CAS-Nummer dazu, den Stoff über regulatorische Datenbanken, Rohstoffspezifikationen und Sicherheitsbewertungsberichte hinweg abzugleichen. Mehrere EU-Anhangseinträge können dieselbe CAS-Nummer haben, wenn derselbe Stoff unter unterschiedlichen Bedingungen oder in verschiedenen Anhängen erscheint.

Molybdenum trioxide hat nach der EU-CLP-Verordnung eine CMR-Einstufung (karzinogen, mutagen oder reproduktionstoxisch). Nach Artikel 15 der EU-Kosmetikverordnung (EG) Nr. 1223/2009 sind CMR-Stoffe der Kategorie 1A oder 1B in kosmetischen Mitteln verboten, sofern sie nicht ausdrücklich zugelassen sind. CMR-Stoffe der Kategorie 2 dürfen nur verwendet werden, wenn der SCCS sie als sicher bewertet hat. Prüfen Sie vor der Verwendung stets den aktuellen Anhangsstatus und etwaige geltende Ausnahmen.

Fügen Sie Ihre vollständige Inhaltsstoffliste (INCI) in den INCI-Checker auf dieser Website ein und gleichen Sie sie mit allen Einträgen der Anhänge II–VI ab. Das Werkzeug hebt alle Inhaltsstoffe hervor, die mit beschränkten, verbotenen oder als Allergen markierten Einträgen übereinstimmen. Das ist nützlich für die schnelle Compliance-Prüfung von Rezepturen fertiger Produkte oder von Rohstoffdeklarationen.

Quellenhinweis zu Anhang II, Eintrag Molybdenum trioxide

Diese Seite fasst einen Eintrag aus Anhang II für Molybdenum trioxide aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.

Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang II für Molybdenum trioxide zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Fügen Sie eine vollständige INCI-Liste ein, um Molybdenum trioxide und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.

INCI-Checker

Einträge vergleichen

Molybdenum trioxide nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.

Vergleichen

Den Anhang durchsuchen

Alle Einträge in Anhang II ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.

Anhang II öffnen