Zum Hauptinhalt springen
Anhang II Eintrag 1140 CMRGeändert 15 Okt 2010

Chloroprene (stabilized); (2-Chlorobuta-1,3-diene)

Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) ist in Anhang II als verbotener Stoff für kosmetische Mittel aufgeführt, die in der EU in Verkehr gebracht werden.

Verbotener Stoff— Anhang II, EU-Verordnung (EG) Nr. 1223/2009
Eintrag: 1140
CMR

Eintragsdetails

Chemische Bezeichnung

Chloroprene (stabilized); (2-Chlorobuta-1,3-diene)

Regulatorische Informationen

Kerndaten

Anhang
Eintragsnummer
1140

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 126-99-8
CAS 126-99-8PubChem CID 31369

Chloroprene

Chloroprene is a chloroolefin. It derives from a hydride of a buta-1,3-diene. — ChEBI

IUPAC-Name
2-chlorobuta-1,3-diene
Summenformel
C4H5Cl
Molekulargewicht
88.53 g/mol
Exakte Masse
88.0079779 Da
XLogP3
2,3
Topologische polare Oberfläche
0,0 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
0
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

2-Chloro-1,3-butadieneChlorobutadiene2-Chlorobutadiene1,3-Butadiene, 2-chloro-ChloropreenCloroprenebeta-Chloroprene2-Chlor-1,3-butadien
16 weitere gemeldete Namen
Chloropren2-Cloro-1,3-butadiene2-Chloor-1,3-butadieen42L93DWV3ANSC-18589CHEBI:39481RefChem:125490204-818-0.beta.-ChloropreneNSC 18589Chloroprene (>96% chloroprene)Chloroprene (99.6% chloroprene)Chloropreen [Dutch]Cloroprene [Italian]2-ChloropreneChloropren [German, Polish]
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer31369

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • ERG2024, Guide 131P (Chloroprene, stabilized): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash immediately - If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H302: Harmful if swallowed [Warning Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H350: May cause cancer [Danger Carcinogenicity]; H373 **: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P317, P318, P319, P321, P330, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H225 (100%): Highly Flammable liquid and vapor [Danger Flammable liquids]; H301 (72.1%): Toxic if swallowed [Danger Acute toxicity, oral]; H302+H332 (18.1%): Harmful if swallowed or if inhaled [Warning Acute toxicity, oral; acute toxicity, inhalation]; H302 (27.9%): Harmful if swallowed [Warning Acute toxicity, oral]; H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (100%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (100%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H350 (100%): May cause cancer [Danger Carcinogenicity]; H371 (18.1%): May cause damage to organs [Warning Specific target organ toxicity, single exposure]; H373 (100%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H411 (89.8%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P273, P280, P301+P316, P301+P317, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P317, P318, P319, P321, P330, P332+P317, P337+P317, P362+P364, P370+P378, P391, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 215 reports by companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Danger Quelle: NITE-CMC
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H310: Fatal in contact with skin [Danger Acute toxicity, dermal]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P262, P264, P264+P265, P270, P271, P280, P301+P316, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P316, P318, P319, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H340: May cause genetic defects [Danger Germ cell mutagenicity]; H350: May cause cancer [Danger Carcinogenicity]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
  • Signal: Danger Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 18 was calculated for 2-chloro-1,3-butadiene(SRC), using an estimated log Kow of 2.53(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low (SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 68(SRC), determined from a structure estimation method(2), indicates that 2-chloro-1,3-butadiene is expected to have high mobility in soil(SRC). Volatilization of 2-chloro-1,3-butadiene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 0.056 atm-cu m/mole (SRC), using a fragment constant estimation method(3). The potential for volatilization of 2-chloro-1,3-butadiene from dry soil surfaces may exist(SRC) based upon a vapor pressure of 215 mm Hg(4). 2-Chloro-1,3-butadiene will not be susceptible to chemical hydrolysis(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 68(SRC), determined from a structure estimation method(2), indicates that 2-chloro-1,3-butadiene is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 0.056 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 3 hours and 4 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 18(SRC), from an estimated log Kow of 2.53(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low. 2-Chloro-1,3-butadiene is not expected to undergo chemical hydrolysis(SRC) because of the lack of hydrolyzable functional groups(3). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2-chloro-1,3-butadiene, which has a vapor pressure of 2.15X10+2 mm Hg at 25 °C, is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2-chloro-1,3-butadiene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals, ozone molecules and nitrate radicals(SRC). The half-life for the reaction in air with hydroxyl radicals is estimated to be 18 hours(SRC), calculated from its rate constant of 22X10-12 cu cm/molecule-sec at 25 °C(SRC), determined using a structure estimation method(2). The rate constant for the vapor-phase reaction of 2-chloro-1,3-butadiene with ozone has been estimated as 0.12X10-17 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(2). This corresponds to an atmospheric half-life of about 10 days(SRC) at an atmospheric concentration of 7X10+11 ozone molecules per cu cm(3). The gas phase reaction of 2-chloro-1,3-butadiene with nitrate radicals may be an important atmospheric removal process in urban areas at night(4), but the rate of this reaction is not known. Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Für diesen Eintrag gibt es nur wenige direkte Treffer; daher werden auch nahe liegende Einträge aus Anhang II angezeigt.

Anhang II 1137
Nahe liegender Eintrag im selben Anhang

Isobutyl nitrite

CAS: 542-56-3
EC: 208-819-7
Anhang II 1143
Nahe liegender Eintrag im selben Anhang

Dinocap (ISO)

CAS: 39300-45-3
EC: 254-408-0

Was Anhang II für Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) bedeutet

Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) ist in Anhang II der EU-Kosmetikverordnung (EG) Nr. 1223/2009 als verbotener Stoff aufgeführt und darf nicht absichtlich zugesetzt werden. Artikel 17 regelt gesondert unbeabsichtigte geringe Mengen, die bei guter Herstellungspraxis technisch unvermeidbar und mit der Sicherheitsanforderung nach Artikel 3 vereinbar sind.

Rezepturentwickler müssen ihre Inhaltsstoffe und Rohstoffe prüfen, um sicherzustellen, dass keiner davon diesen Stoff enthält. Lieferanten sollten auf Anfrage eine Dokumentation vorlegen, die die Abwesenheit bestätigt.

Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.

Compliance-Checkliste

  • Prüfen Sie, dass dieser Stoff in allen Rohstoffen und fertigen Rezepturen nicht enthalten ist.
  • Fordern Sie von Rohstofflieferanten eine Abwesenheitsbestätigung oder ein Analysenzertifikat an.
  • Dokumentieren Sie das Prüfergebnis in der Produktinformationsdatei (PIF).
  • Dieser Stoff hat eine CMR-Einstufung. Prüfen Sie die CMR-Tabelle oben und den aktuellen Status nach Anhang II/III, bevor Sie ihn verwenden.

Häufig gestellte Fragen

Ja. Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) ist in Anhang II der EU-Kosmetikverordnung (EG) Nr. 1223/2009 aufgeführt und als absichtlich zugesetzter kosmetischer Inhaltsstoff verboten. Artikel 17 sieht eine enge Ausnahme für unbeabsichtigte geringe Mengen vor, die bei guter Herstellungspraxis technisch unvermeidbar sind, sofern das Produkt nach Artikel 3 sicher bleibt.

CAS 126-99-8 ist die eindeutige numerische Kennung, die der Chemical Abstracts Service Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) zugewiesen hat. In der Compliance-Arbeit für kosmetische Mittel dient die CAS-Nummer dazu, den Stoff über regulatorische Datenbanken, Rohstoffspezifikationen und Sicherheitsbewertungsberichte hinweg abzugleichen. Mehrere EU-Anhangseinträge können dieselbe CAS-Nummer haben, wenn derselbe Stoff unter unterschiedlichen Bedingungen oder in verschiedenen Anhängen erscheint.

Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) hat nach der EU-CLP-Verordnung eine CMR-Einstufung (karzinogen, mutagen oder reproduktionstoxisch). Nach Artikel 15 der EU-Kosmetikverordnung (EG) Nr. 1223/2009 sind CMR-Stoffe der Kategorie 1A oder 1B in kosmetischen Mitteln verboten, sofern sie nicht ausdrücklich zugelassen sind. CMR-Stoffe der Kategorie 2 dürfen nur verwendet werden, wenn der SCCS sie als sicher bewertet hat. Prüfen Sie vor der Verwendung stets den aktuellen Anhangsstatus und etwaige geltende Ausnahmen.

Fügen Sie Ihre vollständige Inhaltsstoffliste (INCI) in den INCI-Checker auf dieser Website ein und gleichen Sie sie mit allen Einträgen der Anhänge II–VI ab. Das Werkzeug hebt alle Inhaltsstoffe hervor, die mit beschränkten, verbotenen oder als Allergen markierten Einträgen übereinstimmen. Das ist nützlich für die schnelle Compliance-Prüfung von Rezepturen fertiger Produkte oder von Rohstoffdeklarationen.

Quellenhinweis zu Anhang II, Eintrag Chloroprene (stabilized); (2-Chlorobuta-1,3-diene)

Diese Seite fasst einen Eintrag aus Anhang II für Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.

Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang II für Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Fügen Sie eine vollständige INCI-Liste ein, um Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.

INCI-Checker

Einträge vergleichen

Chloroprene (stabilized); (2-Chlorobuta-1,3-diene) nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.

Vergleichen

Den Anhang durchsuchen

Alle Einträge in Anhang II ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.

Anhang II öffnen